Jump to content
SAU Community

Recommended Posts

Hey guys

I am currently in the process of rebuilding my Rb20. I unfortunatly had my bottom end bearings give way (typical RB problem). I have decided that rather than pull it a part and just replace the bearings I am doing a full rebuild that way I don't have to pull the engine down a second time. I am boreing it out to 2.2L and replacing stock parts with the following:

The block is haveing everything done to it crack testing, crank balanced .........so on and so on

CP - Forged pistons and rings

SPOOL - rods

ACL Race- main bearings

ACL Race- big end bearings

HKS COMETIC - steel head gasket

The main thing for me is reliability as it will be my daily driver.I am putting in the head draining pipe back to the sump. I have also got my hands on T04E T3/T4 turbo which will be going on to the low mount as well (just fits). My goal is to run a comfortable 12 second pass without maxing out anything on/in the engine.

So after this my biggest concern will be fuel. I am looking at an intank walbro fuel pump and adjustable fuel regulator as well as larger 550cc injectors. Has anyone got a set of injectors that will do the job. I have been told that RX7 series 4 injectors are a straight upgrade. The block is nearly complete and should be done within this month... (waiting on parts to arrive)

So if anyone has any advise for me please let me know HOWEVER!!!! I don't want to hear anything about why didn't you just bolt in an RB25 or 26. I have had an Rb25 and preffer the RB20 so please keep this thread on the point , All help will be appreciated. cheers Nic

Link to comment
https://www.sau.com.au/forums/topic/259578-rebuild/
Share on other sites

Hey mate - good on ya on keeping the 20! very underrated.

I have not heard the best things about Walbro pumps - I have never used one, just heard not so good.

Would suggest a Bosch one - these seem tried and tested 040 or 044

Also if you've gone through the effort of a full rebuild I would get new injectors for piece of mind, or you can get RX7 ones I think they are 440cc though not 550? If you do go second hand make sure you get them cleaned and flow tested.

Anyways good luck! Just make sure you service it regulalry and don't drive it like an idiot and she'll live forever.

Link to comment
https://www.sau.com.au/forums/topic/259578-rebuild/#findComment-4457848
Share on other sites

surge tank and single O44 is what I have in mine.

and its able to handle up to around 25psi with my 1000cc injectors also you will need a good fuel reg.

Going to be running some decent boost for a 12 second quarter. Go some 550cc injectors. Dont skimp on these as obviously a bad set of these will make u r motor go boom.

Link to comment
https://www.sau.com.au/forums/topic/259578-rebuild/#findComment-4462679
Share on other sites

Hey mate. Nice to see you sticking with the 20 motor. The fuel system you have mentioned will be ampule. The only thing i wouldn't do, would be to put the 550cc injectors out of a rx7. In my experience with them, they aren't designed for a piston motor, as they poor the fuel in when the milliseconds are decreased for cruzing applications. Just what i've been told by a few tuners. Had a set in mine and went through spark plugs like no tomorrow. What management you going to use?

Link to comment
https://www.sau.com.au/forums/topic/259578-rebuild/#findComment-4462724
Share on other sites

  • 4 weeks later...

Update, Hey guys well all paid for waiting on parts to arrive. I ended up going through Mercury Motor Sports for the parts, Trent was pretty good to talk to and was fair when it came to price. So once the parts arrive and the engineers finish their side of things here in Bundaberg it looks like it's going down to Brisbane to Mercury to have a Vipec ECU fitted and tuned, as well as a I'll get them to look at the fuel system and see what they think... So hopefully it will all turn out well. Thanks for the advice guys your opinions are appreciated

Link to comment
https://www.sau.com.au/forums/topic/259578-rebuild/#findComment-4522169
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I have more than enough digging, laying blocks, moving gravel, airrating, feeding and top soiling the grass, and setting up the veggie gardens growing some seedlings,  and then removing all the unused rock to keep me busy for the next few months at least,  hopefully the rain stops soon so I can get a few hours in this arvo, but, before that Sunday is washing day, is every body happy, you bet your life we are Nice country road day drives are a day off whenever I'm muscle sore from all the landscaping at the moment, but, more epic multiple day drives will start once the majority of the big jobs outside are completed
    • I hear that would involve some nice country road drives into the hills for Mark...
    • I thought I'd come back and add something I JUST learned. A Toyota LandCruiser with a 1HZ, mates perfectly with a bottle of Nulon brake fluid. As in, it perfectly screws in. Great make shift funnel when you cut the bottom of it off. This may work for your Corolla.   Unfortunately, tipping a 10L drum is much harder than a 4 to 6L bottle, and they no longer include the easy pour tap which was just perfection to use previously.  
    • Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
    • You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
×
×
  • Create New...