Jump to content
SAU Community

Recommended Posts

hey guys

im in the process of swapping a new rb25 into my s2 r33, as i got low compression issues in current motor.

i have been doing some reading and ppl with similar setups to mine are making good power with the gt3037 turbo

i currently have a kkr430 that has shit itself (white smoke out the back - will never touch kkr again only had it for like 4 months) and im in the market for a new turbo. What other turbos would you's recommend for me? I have around $2500 max to spend, i don't wan't a crazy lag monster, but dont mind a bit of lag for a bit more top end.

my current setup is

splitfires

vipec ecu

bigger injectors (stock ones bored out to just under 500cc i believe)

walbro pump

i think thats the important things.. then fmic exhaust etc obviously.

any help greatly appreciated. i know i dont know much about this area of cars atm but am trying to learn as much as i can. thanks again.

Link to comment
https://www.sau.com.au/forums/topic/259825-garrett-gt3037-for-me/
Share on other sites

I would say do your FMIC & Exhaust First, with a close second to the fuel pump. Then save up for the turbo, injectors and all that, have it all put in the same time to save on labor and tuning charges. Well that's what I'm doing, and my turbo choice would be a GT3076R, my aim is to get a reliable 250rwkw in my series 2 r33. Also maybe do a search, there are plenty of posts on here and other websites about turbos...just depends to how much you want to spend and what power figures you want.

I would say do your FMIC & Exhaust First, with a close second to the fuel pump. Then save up for the turbo, injectors and all that, have it all put in the same time to save on labor and tuning charges. Well that's what I'm doing, and my turbo choice would be a GT3076R, my aim is to get a reliable 250rwkw in my series 2 r33. Also maybe do a search, there are plenty of posts on here and other websites about turbos...just depends to how much you want to spend and what power figures you want.

This is what i will be looking into for a similar level... http://www.gcg.com.au/turbo/ViewProduct.aspx?ProductID=202 Pretty much a HKS GT2835 Pro S

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Not sure the US can import anything other than the C34 Stagea's, but if you can and you need to to tow, DO NOT under any circumstances get an M35 Stagea. If it is just as a family car and your country/state allows it, absolutely and definitely get an M35 (3.5L if possible as it is effectively a 350Z) over a C34.
    • Punch your VIN (nm35-xxxxxx) into Amayama.com You can see everything there quite easily.
    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
×
×
  • Create New...