Jump to content
SAU Community

Recommended Posts

hi everyone,

i m new here, say g'day to everyone first!

recently just bought a r33 S1 gtst.

she comes with some mods: pod, fmic, exhaust, manual boost controller, fuel pressure adjuster(? something like that, cant remember...), boost gauge, turbo timer, 17" wheel. (should be more, but not sure which is which)

all mods done by the previous owner (seems he looked after her well, dont see any oil leak underneath)

body is not perfect but she runs very well.

the previous owner said timing belt has been changed, but when i have a look of the drive belts they seem a bit old. will check again later. (just wanna make sure she is healthy first!)

i have some cars before, but she is my first turbo car :D

(just love that feeling when turbo kick in!)

hope i can learn more about her from you guys :D

she is unregistered now, have to wait until tuesday transport sa open :) ooch! such a long time!

Link to comment
https://www.sau.com.au/forums/topic/260218-new-here-hi-everyone/
Share on other sites

welcome to the club dude! :)

first turbo car is freakin awesome. get some pics of it up asap. :D

better yet, come down to cafe de vilis this friday, or the pga-sa dyno day (linky) on saturday.

Edited by scandyflick

hey Dave where NOT a club

welcome aboard Unnamed player

you certainly will learn a lot about your car

the belts you mentioned already as you stated are your drive belts, alternator power steering and aircon

timing belt be being the plastic cover with RB25 written on it

Welcome to the best Skyline forum in the world!!!

You will find all the answers you ever need here, or at least some great advice on how to go about it.

But you already broke the most important rule!!

WE WANT PICS!!! lol...

Enjoy your 33 bro... when you can..

welcome to the forums :)

haven't been posting a lot but been lurking around the forums for years now, lots and lots of great information and great people on here.

i remember my first turbo car, the moment it spools you're hooked :banana: , now upload some pics. hehe

welcome to the forums dude

yeah the regulars normally meet up at villis on friday nights

come to the dyno day at Graham west dynos this coming saturday mate

introduce yourself and have a nice day chatting

dont ban me :D some pics here:

this is it, dusty black!.....need a good wash

post-60665-1236605377_thumb.jpg

engine bay

post-60665-1236605182_thumb.jpg

manual boost controller

post-60665-1236605239_thumb.jpg

air filter, is this a good one?

post-60665-1236605260_thumb.jpg

fuel pressure regulator, what is it for?

post-60665-1236605282_thumb.jpg

3.5" exhaust. huge!?

post-60665-1236605306_thumb.jpg

post-60665-1236605326_thumb.jpg

post-60665-1236605356_thumb.jpg

engine oil is alright.

post-60665-1236605415_thumb.jpg

post-60665-1236605444_thumb.jpg

17" wheel, pretty new. but seems bit small

post-60665-1236605143_thumb.jpg

aerial is missing :) looking for one now.

post-60665-1236605113_thumb.jpg

some small dents here and there, will bring her to panel shop have it a look. hopefully can bring her back to perfect.

interior is good, just bit messy, so better no pic ;)

oh yes, she is an auto girl :rofl:

definitely have to meet you guys, please tell me more about the car!

I don't want to sound like an ass, but SAU has a 'Newbie' forum for introducing yourself here:

http://www.skylinesaustralia.com/forums/Ne...tions-f182.html

I will move this thread there shortly.

I don't want to sound like an ass, but SAU has a 'Newbie' forum for introducing yourself here:

http://www.skylinesaustralia.com/forums/Ne...tions-f182.html

I will move this thread there shortly.

i just want to say hi to SA members.

please dont move this thread there.

We get dozens of new SA members join up every week. If everyone posted a 'hello' thread like you have done, then the SA section would be full of nothing but 'hello'' threads.

Thread moved to the appropriate forum.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
    • See if you can thermal epoxy a heatsink or two onto it?
    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
    • So, what else.... Power. I don't know what it is making because I haven't done a post tune dyno run yet; I will when I get a chance. It was 240rwkw dead stock. Conclusion from the day....it does not need a single kw more until I sort some other stuff. It comes on so hard that I could hear the twin N1 turbos on the R32 crying, and I just can't use what it has around a tight track with the current setup. Brakes. They are perfect. Hit them hard all day and they never felt like having an issue; you can see in the video we were making ground on much lighter cars on better tyres under brakes. They are standard (red sport) calipers, standard size discs in DBA5000 2 piece, Winmax pads and Motul RBF600 fluid, all from Matty at Racebrakes Sydney. Keeping in mind the car is more powerful than my R32 and weighs 1780, he clearly knows his shit. Suspension. This is one of the first areas I need to change. It has electronically controlled dampers from factory, but everything is just way too soft for track work even on the hardest setting (it is nice when hustling on country roads though). In particular it rolls into oversteer mid corner and pitches too much under hard braking so it becomes unstable eg in the turn 1 kink I need to brake early, turn through the kink then brake again so I don't pirouette like an AE86. I need to get some decent shocks with matched springs and sway bars ASAP, even if it is just a v1 setup until I work out a proper race/rally setup later. Tyres. I am running Yoko A052 in 235/45/18 all round, because that was what I could get in approximately the right height on wheels I had in the shed (Rays/Nismo 18x8 off the old Leaf actually!). As track tyres they are pretty poor; I note GTSBoy recently posted a porker comparo video including them where they were about the same as AD09.....that is nothing like a top line track tyre. I'll start getting that sorted but realistically I should get proper sized wheels first (likely 9.5 +38 front and 11 +55 at the rear, so a custom order, and I can't rotate them like the R32), then work out what the best tyre option is. BTW on that, Targa Tas had gone to road tyres instead of semi slicks now so that is a whole other world of choices to sort. Diff. This is the other thing that urgently needs to be addressed. It left massive 1s out of the fish hook all day, even when I was trying not too (you can also hear it reving on the video, and see the RPM rising too fast compared to speed in the data). It has an open diff that Infiniti optimistically called a B-LSD for "Brake Limited Slip Diff". It does good straight line standing start 11s but it is woeful on the track. Nismo seem to make a 2 way for it.
×
×
  • Create New...