Jump to content
SAU Community

Recommended Posts

1990 Nissan R32 gtr

110,000k's

gunmetal grey

factory alloys with good rubber

Car is registered till oct this year

ENGINE

Late last year the engine felt like it was slightly down on power. It was taken to a well known jap tuner and put on the dyno and made 208kw at the wheels. The guy then found the fuel injector on 5th cylinder was leaking which has caused that piston to lean out and has caused detonation. compression test was done and the results were 170, 170, 170, 170, 50, 170psi.

The car has not been driven since. i have been quoted $5500 for standard rebuild.

This car would ideally suit someone who could do most of the work themselves. Ive been told the parts needed for a rebuild are only 2-3g. its all the labour that costs the money.

BODY

standard bodykit

body is strait and paint work is good. its 19 years old now but is still very respectable for its age.

the front bumper is ok but i was going to get aroung to getting it repainted ($300)

basicly the car comes up good with a clean and a polish.

INTERIOR

very tidy for age

drivers seat showing usual signs of wear

dash bulbs have been replaced with brighter LEDs (looks much better)

DRIVETRAIN

gearbox is good no crunching and diff seems tight

MODS

$700 alarm installed (tilt sensors, immobilisers etc)

Blitz twin pods

Huge exhaust (not too loud though)

Tein suspension

Nismo suspensionm arms

New twin plate clutch

Nismo 320k speedo

Nismo intercooler surround

tinted windows

Steering wheel

Greedy blow off valve

Arc inlet pipe

MAINTINANCE

engine oil replaced every 5000k (redline)

gearbox and diff oil replaced every 10,000k (redline)

clutch replaced bout 1000k ago

all belts, radiator, water pump replaced @ 80,000k

all brake rotors machined when clutch was done 1000k ago

I have owned this car for over two years and up until now has been a great car.

My asking price is $11,000ono or swap for why.

My reason for selling is i have alot of debt and cant justify spendenig money on a motor rebuild when other things should take priority.....sadly:(

Will get pics up asap or can just pxt via phone

Call or text Carl anytime on 0420783616 post-39739-1236550902_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/260224-r32-gtr-for-sale-11000-ono/
Share on other sites

This car also has a brand new speedo cable fitted and comes with original bumper mesh that covers the intercooler also the original airbox. I have a gtr workshop manual on cd and heaps of reciepts for things done to the car.

First person to come up with $10K takes it away!

For an idea of what i would swap.........dont offer me any ford or holden! enough said. haha;)

Hey guys the passenger side window has decided not to work? it seems to have no power at all? ive never had any problems with the windows before. maybe its because its been sitting around for 2 months? but anyways just letting you know.

Hi karl

I spoke to you today about your car,I am the bloke from tassy and was going to catch up thursday.I see you may have sold and i hope you have but if it falls through please call me as i will still come and look and most likly buy.

regards stuart 0409135950

STILL FOR SALE!!!.........deal didnt come through. $9500 FIRM. I will not give this car away for nothing. If your not preppared to pay the asking price, dont bother looking :D Window is working fine now, the window lock was on :banana:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...