Jump to content
SAU Community

Recommended Posts

Been chassing a new indicator: on closer inspection $80 for 1 average cond 2ndhand orange indicator OR est $100 for a 'pair' of brand new clear ones.

I prefer the orange just quietly but have ordered a pair of clears, chassing some opinions, please keep in mind my car is purple :cool:

some differences:

post-39812-1236780150_thumb.jpg

post-39812-1236780171_thumb.jpg

post-39812-1236780209_thumb.jpg

post-39812-1236780490_thumb.jpg

post-39812-1236780252_thumb.jpg

Edited by Char
Link to comment
https://www.sau.com.au/forums/topic/260714-r32-clear-or-orange-indicators/
Share on other sites

depends on the colour of the car of course but i prefer the Orange, mainly because it adds to the naturally aggressive look of the GTR... non-GTR Orange bulbs aren't as orange because the face isn't orange itself but i saw your car on Saturday at Rhys' cruise and i personally think keeping the orange would look nicer than going for the white

it's your car mate, change them around and see what you think yourself, not that hard to change them back :cool:

I prefer* the clears but the lenses are made of plastic and like the 33 headlights etc, yellow over time which looks crap compared to the perfectly clear glass lenses on the 32 headlights.

I wish I could get the indicator lenses made from glass but it's probably something for the too-hard-basket :)

* My 32 is black though and it looks phat with clear indicators, can't say about other colours :D

Edited by bubba

Think its all personl preference. I like the clear ones better personally, I dont like orange. Maybe do a google and see what other purple cars look best with. or if you are handy with photoshop you could always see what they will look like before you make your mind up. I love photoshop :)

thanks for opinions people

hell old photo, car has chaned alot, but can you sort of get an idea..

photo shop hack:

I like the clear indicators generally but, because of the colour of your car I think the orange would suit it best. Got a pic with the orange ones?

Photoshop is gooooood. I so much prefer it with clear indicators, they go much better with the white rims and it looks more modern/fresh. if you do go with clear or tinted, I also like the nismo R33 side blinkers, that is if your car has the little side blinkers, otherwise there is no need to worry about them. They look way sexier than little orange nobs. :P

Purple really clashes with the orange indicators.

They Stock GTR look good with them cos its a distinguishing feature on them.

Go clear indicators, tinted makes headlights look too small, and cops don't agree with the tinting

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I will rebutt this and the preceding point from Dose....but without doing any calcs to demonstrate anything and without knowing that I am right or wrong. But... The flow capacity of a fluid transfer system is not limited by the smallest orifice or section of conduit in that system, unless it is drastically smaller than the rest of the system. OK, I use the word drastically perhaps with too much emphasis, but let's drill down on what I really mean. The flow capacity of the system is the result of the sum of the restrictions of the entire system. So, to make an extreme example, if you have a network with 3" pipe everywhere (and let's say a total length of only a few metres) and that 12mm ID restriction of the oil filter connection being the obvious restriction, then for any given amount of pressure available, the vast majority of all the pressure drop in the system is going to occur in the 12mm restriction. But.... increase the length of the 3" pipeline to, say 1000m, and suddenly the pipe pressure loss will likely add up to either be in the same order of magnitude, possibly even exceeding that of the 12mm restriction. Now the 12mm restriction starts to matter less. Translate this to the actual engine, actual oil cooler hose sizing, etc etc, and perhaps: The pressure loss caused by flowing through the narrow section (being the 12mm oil filter port, and perhaps any internal engine oil flow pathways associated with it) is a certain number. The pressure loss through, say, -12 hoses out to the cooler and back is negligible, but The pressure loss through -10 hoses out to the cooler, at the exact same length as the above, starts to become a decent fraction of the loss through the 12mm stuff at the filter port. Maybe even it starts to exceed it. I could actually do these calcs if I knew 1) how much oil was actually flowing in the line, 2) gave enough of a f**k to do things that I hate doing for work, voluntarily for a hypothetical discussion. Anyway - I reiterate. It's not the narrowest port that necessarily determines how much it can all flow. It is the sum. A long enough length of seemingly fat enough pipe can still cause more loss than a semmingly dominant small bore restriction.
    • To pick up what Dose is putting down. Not a lot of point running a huge hose if the motor is still restricted to the smaller size... It's only capable of flowing so much at that point...   *Waits for GTSBoy to come in and bring in the technicalities of length of pipe, and additional restriction from wall friction etc etc*
    • Hooley Dooley these things have some history! If i sell them they will need a certificate of providence to prove they have been in the hands of verified RB20 royalty! They have been stored in a plastic tub, away from sunlight and moisture. They are in mint condition. And they will stay that way, as i have sprung the money for a set of shockworks coilovers. I'm just working on getting them in at the moment, after rebushing the rear of the car, and while the subframe was out i welded in the GKtech reinforcement bracing as well.  They will get a workout at Ararat King of The Hill in November. I ran 48s on the short course there a few months ago, and i am hoping with new bushes and shocks in the rear i can launch a bit harder. There was a fair bit of axle tramp when i tried too hard off the line. a few of the corners had dips mid way which also made the car feel a bit unsettled, hopefully this will help there too.   
    • Food for thought, the stock oil filter thread is a 3/4-16 UNF, which has an ID of about 10 to 12mm (according to ChatGPT lol). Now compare than to an 10AN, which has an ID of about 14mm (Raceworks is 14.2mm, Speed flow is 14.27mm).  
    • Yep, totally get that. However hooking in for Generator back up is only a few hundred bucks for the wiring. You could put a couple of those in (for different circuits explicitly) and run a couple of baby generators. Bonus, you can balance them across different circuits, and now have backups in your backup. I'm looking at buying places that won't even have water etc, and I don't mind the idea of getting off the electric grid either, even with everything you've said. This country already has enough power outages that even the mains grid isn't that reliable anymore. I do agree though on spending a bit more to get better gear, and to add some extra redundancy in to the system too.
×
×
  • Create New...