Jump to content
SAU Community

Recommended Posts

hello all, now i admit i am new to cars and turbos and stuff and probably dont know wat im on about, but i havea hks ssbov and everywhere i go people seem to be bad mouthing it becuase it apparently makes ur car stall and shit like that.

now i went through those problems as well, but i later found that wen having a hks ssbov u are also required to have a hks idle stabaliser, and wen i got that in, everything worked like a charm!!!!!!!!!!!!!!!!!!!!!!!

Link to comment
https://www.sau.com.au/forums/topic/26090-hks-ssbov/
Share on other sites

Flutter is not from the BOV it is from the air flowing back through the turbo. It's not good for the turbo at all. Obviously by over-tightening the BOV you're gonna end up with the air going thru the turbo as it can't vent, hence the flutter.

Link to comment
https://www.sau.com.au/forums/topic/26090-hks-ssbov/#findComment-553759
Share on other sites

One of the things about Jap BOV's is that unlike ones from Oz they aren't all simply products of the metal laythe....A lot of Jap ones are actually cast items, this is why they are far more expensive. From memory the HKS Sequencial BOV is not adjustable, I had one a long time ago on my starlet. The Super Sequencial is though.....then of course there is the Super Racing BOV from HKS, now that's expensive :)

Link to comment
https://www.sau.com.au/forums/topic/26090-hks-ssbov/#findComment-553810
Share on other sites

As I said I don't think you can adjust the older one. If yours has adjustment then what it does is put more pre-load on the actualto spring insied the bov and makes it hard to force open, you do this if you run higher boost (set it soft for low boost cars and hard for cars with much higher boost) The basic rule of thumb is set it hard so you hear the flutter then back it off till you can't here it any more ..... that should be the right setting.

Link to comment
https://www.sau.com.au/forums/topic/26090-hks-ssbov/#findComment-554179
Share on other sites

because the SSQV as 2 valves, the smaller purple pointy thingy and the bigger valve with the HKS wordings...the screw only adjusts the tightness of the big valve.

i've yet to solve the damn fluttering problem because of this...no matter how loose i turn it.....it only affects the bigger valve...

Link to comment
https://www.sau.com.au/forums/topic/26090-hks-ssbov/#findComment-554679
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Hi. Yeah thanks. Car is already at tuners and it staying there to resolve "many" issues they do not like. So it is in a good hands. Getting a good tune on that Nistune ECU too so the car would be good. Just needs a little tune up and love.
    • Probably gonna remove manifold and turbo. I’m not sure if I can get M12 x 1.5 air tight. Could use high temp Loctite 246 or something similar, but I don’t know. Maybe it’s just best to remove everything again and weld an 1/8NPT on there instead.
    • Yeah, saw the ratios, not impressed. Would like the punch I have in the first gears now. With those ratios it won't be the same.  Also want the h pattern gearing, or at least a quiet gear set that don't need to come apart for service each year. Looks like the only "reasonable" way Is a 8hp70 transmission, but where is the fun in that🤷‍♂️
    • Hey mate, really appreciate the help. Have been looking pretty extensively myself and was certain they were retro fitted, but then ended up finding a 4 door with what looks like the same side skirts or at least the closest I’ve seen. The photos from the Offset Kings event at Sunrise 2016. https://fatlace.com/offset-kings-okayama-at-sunrise/
    • Isn't there a PAR engineering gearset that has closer to stock ratios? And they claim they'll do whatever ratios you want.
×
×
  • Create New...