Jump to content
SAU Community

Recommended Posts

Hi all.

I've had my guards pumped on my GTSt and now these wheels sit in the guards too much.

They are SA3R Super Advan Tri-spokes. Black with anodised red lip. Look great on a black or white car. They all have centre caps. Little bit of gutter rash and peeling of the anodising but they are shown in the pics.

Fronts are 17x8 +35 offset

Rears are 17x9 +38 offset

post-10715-1237087102_thumb.jpg

post-10715-1237087213_thumb.jpg

post-10715-1237087447_thumb.jpg

post-10715-1237087534_thumb.jpg

post-10715-1237087598_thumb.jpg

post-10715-1237087675_thumb.jpg

post-10715-1237087730_thumb.jpg

post-10715-1237087811_thumb.jpg

post-10715-1237087908_thumb.jpg

post-10715-1237087958_thumb.jpg

Price - $700 for the wheels and a bit extra for tyres. The tyres currently on the car are (Front) 215/45/17 cheapies but almost brand new and 255/40/17 Bridgestone TS-01's that are almost dead. I have other 2nd hand tyres so we can work out something. If you don't need any tyres then that's fine too.

Pick up in Doncaster East unless you want to organise postage.

Willing to swap for these rims in GTR offset (9in, +22offset) or R33 GTR rims or any other set that is all 9in wide in +20 to +30 offset.

Also for sale is a hicas lock bar and a few extra fittings etc. but I'm not sure what they are for as I removed the whole hicas system? I don't think it's ever been used? I just want back what I paid for it.

Price - $100 and can post.

post-10715-1237088018_thumb.jpg

ROH 17x7 rims PAIR ONLY. Not sure of offset but around +35ish.

Price - $200

post-10715-1237089812_thumb.jpg

post-10715-1237089896_thumb.jpg

GTR rear Seats. Very good condition. No holes or rips. Sorry the pics were taken in my roof so they're pretty crap.

I now have a cage so don't need them.

Price - $200

post-10715-1237090140_thumb.jpg

post-10715-1237090192_thumb.jpg

Call me on 0421332860 or PM.

thanks,

Russ

  • 2 weeks later...

Super Advan Rims are gone!

After a closer look at the lock bar it's pretty average. I'll sell it for $50. I paid $100 for it so I got ripped off.

ROH wheels are still there too.

Russ

  • 1 month later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Maybe it's time for a M3 F80 LCI, and leave it stock.  Drive it to a shop, sip on your latte with nutmeg whilst it gets serviced and on the way home swing by and grab some chai mix for the evening.
    • Great work! Thanks for documenting the process.
    • How would you even adjust the clutch if the pedal already has the correct free play? The operating cylinder has no adjustment in mounting position or rod length. On pull style clutches there is also no ability to adjust the bearing carrier. Push type I can see how adjusting the carrier height makes it all work.   If this is the twin plate clutch did you verify that your friction disks were oriented correctly? It's not mentioned in the directions at all you just have to notice that one side the friction disks have a part number on the hub fingers and a subtle coning to those fingers. Another thing that I noticed was if you put the friction disks in backwards the pressure plate fingers will not be even and flat when the clutch is installed.
    • yeah, mechanically, it is probably do-able, off the top of my head, there would be the transfer case, which I believe will bolt up to the rear of the RWD transmission, the shorter rear tail shaft. A front drive shaft, front diff, engine upper sump, front drive shafts, front hubs and front AWD struts (they are shaped around the front drive shafts), LCAs (at the very least from the front suspension) oil cooler.  You might want the rear diff from an AWD too, so you can be certain the front and rear diff rations are identical.  Who knows what brackets and mounts you might need.  So a whole doner car might be the best option if you need to maintain RHD. Then actually making it work, that would be a whole different story.
×
×
  • Create New...