Jump to content
SAU Community

Kakimoto Regu 06&r Or Trust Pe2 Extreme Power

r33123

By r33123,
in Engines & Forced Induction

 Share

Recommended Posts

grandmasterb Grand Master

grandmasterb

Posted
Posted
hi friends, as title say which exhaust system is quiter and better on r33gtst thanks need help asap.making 290kw.

I've been looking at the same options for my R32 and the Kak system was quieter out of the 2 but still had a nice note above 4k

  • 1 month later...
Blitz Grand Master

Blitz

Posted
Posted

Slightly off topic but I have just fitted the Kakimoto Regu 06&R to my EVO and the difference in performance and overall exhaust note compared to the unknown Japanese system I previously had is very noticeable. There is virtually no drone at idle/cruise but the system has a phenominal bark when you apply the right foot :thumbsup:

Just Jap Racing Grand Master

Just Jap Racing

Posted
Posted
im looking at getting kaki for my car from JJR, heard a few clips on youtube and sounded great, my zorst is way to loud and more suited for track

The Regu 06&R is one of our most popular systems at the moment for street driven vehicles.

You will not be disappointed :thumbsup:

regu06r-03.jpg

Cheers :)

kamalall356 Rookie

kamalall356

Posted
Posted

I've got a Kakimoto Regu 06&r on my R34 GTT...

Performance

It is basically silent as stock (idle to 2.5k) and 3k all the way to redline there is a quality growl.

Put it this way everyone who jumps into your car will think you have a stock exhaust (without looking at it lol) before your turbo kicks in...

Looks

I looked at every catback for my car about an year ago prior to purchasing it... HKS/Apexi etc. All did not come up to scratch in terms of finish by comparison to this. Chrome tip as well... its almost silver/gold (the advertising style pics are a little deceiving) in color as well so if you have bronze/gold rims they will match up nicely.

I can record the note from my exhaust to my phone and upload it if theres any interest??

Az_StrYdeR Collaborator

Az_StrYdeR

Posted
Posted

+1 for Kaki Regu 06&R

Have had one of these on my car for about a year now and it's a awesome sounding exhaust. Good at low revs and daily driving, but open's up great when you're giving it heaps.

Have heard from my tuner that the Trust PE II is quiet, because it is quite restrictive.

shaun123 Community Regular

shaun123

Posted
Posted (edited)

so it seems the kaki regu 06 is the better choice over the trust pe2 (im guessing both of these exhausts are stainless steal?) ?

i was wondering if someone could also answer this question:

atm i have a HKS hi-power catback, unknown cat, unknown 3" frontpipe... what dB would this roughly be rated at? how much would the kaki reduce the sound by (db) ?

just so i can get a comparison to see if its worth getting the kaki or trust or just staying with the HKS if its not going to change things much

Edited by shaun123

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MissMintyR33
      R33 persistent issues. P/steering and lag/misfire

      By MissMintyR33 · Posted

      I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • GTSBoy
      Freddy Plenum vs Genuine options RB25

      By GTSBoy · Posted

      My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
    • Murray_Calavera
      R33 persistent issues. P/steering and lag/misfire

      By Murray_Calavera · Posted

      There is a really fun solution to this problem, buy a Haltech (or ECU of your choice) and put the MAF in the bin.  I'm assuming your going to want more power in future, so you'll need to get the ECU at some stage. I'd put the new MAF money towards the new ECU. 
×
×
  • Create New...