Jump to content
SAU Community

Recommended Posts

Now yes I have already posted a thread, but since you are unable to edit threads for price change etc. I have decided to make a new thread

Cheers

The time has come to sell my baby, where I'll be moving doesn't have secure parking so I've decided the time has come to sell my pride and joy.

93 GTST.

Mods:

18" rims

trust front bar

impul r34 side skirts

impul r34 rear bar

drift lip wing

custom red

series 2 engine 100,000km

blitz front mount

blitz neuro spec V exhaust

kkr Turbo

dual stage boost contoller

walbro fuel pump

Nismo fuel reg

splitfire coils

blitz BOV

apexi safc 2

bee*R Rev limiter

dyno proven 250.2kw at the rears

Apexi Coil overs

2 way lsd

rda slotted rotors

ferodo ds2500 pads.

Complete package one of the tidiest examples around, goes well, handles well, stops well you can't go wrong!!!

Car is currently in sydney but has ACT rego custom plates "Y TR1 33" plastic slim line black and white

Chasing $14000 o.n.o

pm

or

0420 243 038

cheers

post-21949-1237339300_thumb.jpg

post-21949-1237339314_thumb.jpg

post-21949-1237339322_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/261625-hot-as-r33-250rwkw/
Share on other sites

16 psi it does have a slight drop off before max.

It's daily driven at 14psi and pulls 241 with a perfect power curve.

Results we're done by trojan in mitchell ACT I believe they used gus' dyno which is used for a little of runs in canberra.

Add after market injectors and a powerfc she'll pull 270-280. The KKR turbo's work great for some reason got a mate with a 32 running the same setup pulls pretty much the same

Edited by Darkon

amazingly yes. If you know rhodes shops at all I've had no problems getting in the underground car park or going up on the roof. Also going up the levels at burwood Westfield. I wouldn't recommend flying up and down ramps, speed bumps etc but with a little bit of care theres usually no dramas. It sits pretty much on the 100mm never had an officer question the height at all. A few have actually said it's a awesome looking car lol

Hey interested in swaps for a supercharged Toyota Celsior??

got a link or anything mate?

I'm actually after an aristo but no harm in looking as i want a comfy 4 door

No worries Troz I'm on leave next week so I'm pretty free. If your from canberra you've probably seen the car around alot a few people there a very unhappy about me selling up but I'm gettin old :P lol

I'd buy it myself if I wasn't in the market for something a little more...stock ;)

Plus there's no bloody way it's making it up my driveway, too steep, with a retarded drainage ditch, AND dirt. wtf.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
×
×
  • Create New...