Jump to content
SAU Community

Recommended Posts

I hate to be the barer of bad news but put simply, there is no way of getting a 'full' quality system including amp and sub for 1 kilobuck. You can always run with cheaper components but beware, they're exactly that and you'll only have to fork out more later on down the track.

I'd suggest you do your system in stages of save for a little longer. The cheapest 'full' systems we do are around the $1800 mark. :P

Liquid,

I have just installed some gear into my r33 and while it would not suit the sound quality conscious it is nice, clear, loud enough for me and most importantly for some of us, inexpensive.

I purchased a JVC 995 MP3 headunit new off e-bay for $400

(cheapest h/u i could find at the time that was MP3 compat and had 4v pre-outs and a controllable sub out)

For the doors i purchased a set of Kenwood 16cm 2-ways $115

Rear (not necessary but i thought, what the heck) i have Pioneer 16cm 2-ways approx $100

Sub, Clarion 12" dual voice coil package deal in enclosure from Autobarn $249

I am driving the sub off an old but faithful Alpine amp that i have had for some time so saved a bit of money there.

So thats a total of $865 if you were to find a nice reasonably priced amp (jaycar maybe) for the sub you wouldn't be too far over your budget. I am sure if you shopped hard you could find all the above cheaper.

As i said above, not perfect sound, not competition quality but makes plenty of noise and not distorted.

Oh yeah, the above speakers all went straight into the factory mounts.

Hope this helps

Gary

man i would suggest save up for a little. you really do get what you pay for! I have people all the time come into work in the same situation, spent money, then come back in a few weeks disappointed with their stereo's. It really whats up to your own imagine what you do and how much u spend, but a grand will certainly get the ball rolling

i disagree with some of the above comments. some people just want a stereo system for some decent sound, and are not too into it unlike you or I. Theyre into other things and would rather spend their money on something else. $1,000 gets u a very nice aftermarket stereo system but like anything, more money will get you something better. It's obvious.

If you're not going to worry too much about ur sound system, and want to spend ur money on other things , ie. performance mods or something, then a 1K system u'll keep for a very long time.

So True, my mate with a charade has

Kenwood H/u = $230

Pionneer Co-ax Front Speakers = $120 (?)

Pioneer 3 way 6x9's = $150

Clarion 12" Sub / V-net amp = $180-200 (?)

Total > $700

and honestly, this thing for a cheap ass system sounds bloody good, he isnt much into cars, just bought the head unit and fronts when he first got it, eventually got 6x9's for some more noise then recently got the sub and amp off a friend.

It retains good quality at very suitable volumes and when he wants to just go loud for fun and doesnt sound full sh!t or anything.

before anyone get annoyed at this, i am not having a shot at any one, i am just trying to help liquid85 out. Sometimes 2nd hand gear is not always an options due to availability, 2ndly having all that gear is a great start, but you still have to put it in, you still are up for a few hundred by the time u buy / build a sub box and wire the whole thing up. I know quite well it is possible to scrape together somthing for under a grand, but man you have a lot of shopping around to do. A good start maybe something like a m200 alpine amp and type s 12, can be done for under $500. I just dont want to see something in a car, and then not be happy. Good luck with finding a system anyway, let us know how you get on :D

i think its a safe bet to say, that unless u have a luxury model car, any aftermarket system is going to be way way better than ur stock system. Depends on how good u want it thats all.

i have a friend in a similar position to boners, bought some splits, some 7x10's and an alpine type S sub, amped the splits and sub with a boss audio amp, and it sounded very very nice! Then, satisfied wit his system, he spent his money on other things.

My system in my old vl was $1100 (thereabouts) and it was the following

1 x Pioneer DEH3050 (I already had it)

2 x Clarion 10" Subs ported in the boot with portholes to the parcel shelf

2 x Pioneer 6" door splits with custom door moulds (front)

1 x Pioneer VNET2100 AMP for rear subs

1 x Pioneer VNET450AMP for door splits

1 x Set of crappy rear speakers which I already had

This was fully installed and setup by Garys' Car Radio in high st Preston. Rod did me an awesome deal. Best sounding system for a grand I had ever heard. Even gave good competition for 2k systems.

Hi,

If you are on a budget dont worry about buying a DVC sub as they are not any more powerful. They only enable you to pull more power from the amp by using different loads etc.

You dont really want to get a DVC sub and then bridge a 4 channel down to 2 channels and use 1 for each voice coil as technically each bridged channel will provide different output.

Just go nice 2 channel, and single voice coil sub and bridge the amp to 1 chann.

Originally posted by hvm

Hi,

If you are on a budget dont worry about buying a DVC sub as they are not any more powerful. They only enable you to pull more power from the amp by using different loads etc.

You dont really want to get a DVC sub and then bridge a 4 channel down to 2 channels and use 1 for each voice coil as technically each bridged channel will provide different output.

Just go nice 2 channel, and single voice coil sub and bridge the amp to 1 chann.

thats not the idea but, wouldnt you parallel up the sub by running a wire from the positive of one voil coil to the negative on the other, then run power from the other two plugs, then bridge 2 channels of the amp for sub, and have the other 2 channels for front speakers.

just my 2c

hey liquid85

$1000 will get you a really good bang for your buck system, what type of car audio shops do you have around your area? places like JB HiFi ect ect, places like these just go crazy when they see cash in hand. So make them offers. 300 - 350 will get you a good headunit for this price bracket. I would go pioneer:)....UsAlly to make a good front stage go some 6" splits, depending if you want to be heard from the shops or sound qauilty the size of the sub and and box will play a big part. For sound qauilty go 8" to 10", if you like your rap and RnB go 12" to 15", as i say to my mates the box is pretty much every thing when it comes to the desired sub bass. Spend no more than 200 on the sub. splits you could get for 200. Make sure when you purchase an Amp Ask to see the hand book to see the Specifications of the amp, find out its true WATTS RMS power output, just because an amp has shown on it 200watt by 4, dosnt mean it produce's that amount of power, its just a marketing tool. Thats what sucks most people into buying amps thinking they have you huge power output. Save around 70 for wireing kit and RCA leads and other things like speaker wire, 8 gauge wireing kit sould be fine for a single amp setup. 400 will be enough for a good 4 channel amp for your purpose.

:)NOW BARGIN WITH THEM:)

if you need any more help just ask

cheers mate

shaun

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...