Jump to content
SAU Community

Recommended Posts

hey guys i know this has been discussed before. and its not a great idea due to all the electronics etc.

But basically i was going to throw in a full mechanical manualised auto valvebody into my r33 auto. from Joel at jd transmissions.

Basically it removes all the electronics from the the box and all shifting is done mechanically.

slightly different to the MV stage 3 kit where an electronic control box is used with a shift kitted valvebody etc.

so point is could this be done? r34 tiptronic into r33 with that manual valve body setup?

as that would eliminate most of the electrical troubles..

also i understand that i wont have the tiptronic functions etc. just wondering if it is possible. probably not worth the hassle though.

Link to comment
https://www.sau.com.au/forums/topic/262739-crazy-idea/
Share on other sites

haha should of expected that...

Ive tossed up the idea. but last time i priced it up and even with mates rates to have it all put in it came to $2600 with a standard clutch that just isnt going to cut it. so you're looking over $3000 to do it properly.

the whole manualised auto deal is going to cost a smidge over $1000 for everything. theres a r34 box on here now for $400 - so maybe like $1500 all up. half the price.

Its just an idea im throwing out there. i personally think its more hassle than what its worth, but would be kinda cool and different if it could work.

Link to comment
https://www.sau.com.au/forums/topic/262739-crazy-idea/#findComment-4499653
Share on other sites

seen that vid before, i think from memory he had a c4 or something behind it? or could of been something else cant remember.

im most likely staying with the 33 box and going with that. was just simply asking would this work with the mechanical valvebody handling the shifting? therefore i wouldnt need to worry about all the fancy wiring.

2 pros i can see

- r34 box is newer than any r33 box, so should be better nick

- would get a nicer looking shifter to work with (and maybe the up down tiptronic shifting if i could work something out with that)

Link to comment
https://www.sau.com.au/forums/topic/262739-crazy-idea/#findComment-4500376
Share on other sites

yeah ive checked it out and with the tiptronic when you push up or down it engages an electronic switch to change gears.

so unless i wire that up to fire a motor to move the mechanical lever to change gears its out of the question. just another thing to break haha

worth the thought anyway.

Link to comment
https://www.sau.com.au/forums/topic/262739-crazy-idea/#findComment-4501740
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...