Jump to content
SAU Community

Recommended Posts

VicDrift is proud to bring to you Round One for the Club Championship for 2009 at Winton Raceway!

~ Sunday 19th April 2009 ~

This is an OPEN event for all (VDC membership not required), with qualifying and the comp to be held before lunch to ensure maximum track time for everyone all afternoon!

Beginners section will be open but not when battles are on.

Entry Prices:

$15 gate fee (Applicable to all inc spectators)

$130 Members entry fee

$140 Non-Members entry fee

$20 - Passengers - We will not be accepting passenger forms before 9am as drivers are our priority!

Other Prices:

VDC membership $85 (Once off $20 admin fee incorporated)

VDC membership renewal $65

Payment Options and pre-entry forms can be found here:

http://www.vicdrift.com/forums/index.php?showtopic=608

* PayPal payments are now being accepted*

Pre-Entry is available and is highly encouraged to help save time in the morning as you only have to show your cams/aasa license, pay (if you didnt pre-pay) and collect your arm bands! How easy is that!

Please encourage your mates to pre-enter too!

Pre-entries are now being taken. Please note that entries emailed to me between 1/4 - 12/4 will not get a confirmation until after the 13th as i am out of the country.

Acceptable Licenses are: AASA or Cams L2NS - No license means no going on the track!

On the day purchase of AASA license:

AASA license $50

(Can be purchased at the Winton office on the morning of the drift day. This needs to be done before you come into the scrutineering bay to pay and have your car scrutineered as entries will not be accepted without proof of license or receipt of payment from Winton)

Please note : VDC board members will be checking aasa and cams licenses, this year we will be checking everyone. Please ensure all your licenses and memberships cards are valid.

The usual requirements as always are:

*Long sleeve and long pants of non flammable materials i.e. No Nylon

*Closed footwear

*Helmet that complies to Australian Standards (has ASA or Snell Sticker)

*Car needs to be in a good condition, no oil leaks, no loose items in the car and battery secure. It must pass scrutineering to be allowed on the track!

*Working seat belt/s (give it a pull and make sure it locks)

*Passengers will only be permitted in cars with half/full roll cages. Passengers must also be wearing the appropriate clothing, footwear and helmet. They must also abide by the track rules or they will not be allowed to go on the track. Drivers will also be held accountable for their passengers following the track rules!

* Every car must have the correct amount of wheel nuts:wheel studs. Get it right before you get to the track!

* FIRE EXTINGUISHERS ARE COMPULSORY AND MUST BE FITTED CORRECTLY IN THE CAR AND WITHIN EASY REACH OF THE DRIVER!

Cant make this one, see below for the rest of 2009 events:

http://www.vicdrift.com/forums/index.php?showtopic=611

  • 2 weeks later...
Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...