Jump to content
SAU Community

R32 Gtr Front End Parts And Other Bits

Dahtone Racing
 Share

Recommended Posts

Dahtone Racing Grand Master

Dahtone Racing

Posted
Posted

Items

1. R32 GTR front guards

2. R32 GTR front bumper bar

3. R32 GTR indicators

4. R32 projector head lights

5. R32 GTR carbon vented bonnet

6. R32 coupe doors with windows and regulators

7. R32 GTR dash with vents

8. R32 GTR grille

Condition

1. Never been damaged or repaired, no indicator holes perfect condition, bought brand new

2. Never been damaged or repaired, bought brand new

3. Stock orange GTR indicators average condition

4. Decent condition, one mounting point has been plastic welded

5. Decent condition, corners have been chipped, has been painted kandy red over the carbon so it looks like red carbon, paint and be removed and cleared over again so its back to normal

6. Good condition, slight repair on driver side door

7. Very good condition, vents are perfect

8. Never been damaged or repaired, bought brand new

Price

1. $600 pair (only separating if there are buyers for both)

2. $300

3. $150 pair (only separating if there are buyers for both)

4. $150 pair (only separating if there are buyers for both)

5. $500 as is ($600 if it has to be stripped and cleared)

6. $200 pair (only separating if there are buyers for both)

7. $200

8. $200

Location

Sydney

Contact

PM or email [email protected]

Extra Info

Postage can be arranged anywhere in Australia

I can also do better prices if more than one item is purchased

Heres a photo of the parts on the car

3025412115_de01958317_b.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Rb26 iron block limit

      By GTSBoy · Posted

      Yeah. OK. I'll say the same thing I say to everyone. You do not have to use 100% throttle all the time.
    • niZmO_Man
      ATCC Amaroo Park 1987

      By niZmO_Man · Posted

      R31 = nose heavy
    • Curlyfred
      Rb26 iron block limit

      By Curlyfred · Posted

      Mainly being afraid of breaking something on something i've poured so much money into haha
    • Dylannn
      For Sale Haltech Elite Plug n Play

      By Dylannn · Posted

      Hey   ive gone for a terminated harness on my build so selling brand new unused and unopened piggy back harness  https://www.haltech.com/product/ht-141357-elite-2000-2500-nissan-skyline-r32-33-r34-gt-r/ Located Bathurst NSW   price $600 + postage     
    • drifter17a
      Rb25 trigger kit and timing misalignment

      By drifter17a · Posted

      The trigger kit I have is similar to the one in the link below. While going through Facebook, I saw someone else mention a similar issue, and I’m starting to think this could be related to the crank gear itself. I understand these parts are CNC machined, but maybe some earlier versions or individual pieces might have slight inconsistencies—it just doesn’t look right in my case. https://www.facebook.com/share/16an8evZd9/?mibextid=wwXIfr I originally installed the crank gear using the thin OEM washer, but as shown in the attached photo, the timing belt walks very close to the edge. When I tried using a Nitto washer—which is thicker—it actually made the issue worse. The belt walks about 1mm off the front edge, which raises more concern about alignment.   I’ve gone through the full process of elimination:   The tensioner pulley and bolt are brand new and installed correctly. The bolt isn’t bent and is oriented properly. The back of the tensioner and the idler pulley are clean and seated correctly. The idler sits slightly more forward, which I understand is due to its design. I’ve experimented with both tight and loose belt tension, but it makes no difference. As soon as the engine runs, the belt immediately walks forward again—even if I reset it beforehand.     At this point, I’m considering replacing the crank gear with your Race Version 1 (12-tooth), but before purchasing, I wanted to ask:   Are you aware of any alignment issues when using this gear? Would this gear help keep the belt aligned correctly, or could the walking still occur? Does it work with a standard missing-tooth crank and rear washer? Is there any specific crank setup or install procedure required?     For reference, I’m not using a front washer, as the PRP crank gear seems to replace the need for one.   Looking forward to your advice.
×
×
  • Create New...