Jump to content
SAU Community

Recommended Posts

The turbos are stock, albeit they are N1 version, same with the block.

Running a set of Tomei cams and Tomei cam gears.

It does run quite well indeed. I'm still pinching myself its a wagon. Power is one thing, and I've been in plenty of powerful cars, including my R32GTR. But its really the handling that has me stoked about the Stagea.

Probably the biggest factor besides power, was wagons handle like boats, or so I thought before I drove the 260RS.

250 is plenty enough power for a daily ride. I dont want anymore more power in this wagon, as I'm finding the power/handling balance is just right.

nice figures. i notice the dyno was run in 3rd gear and not 4th. any reason for this?

what other supporting mods do you have?

exhaust? filter? computer?

I have a S1 260RS stock everything, running 1bar, and its making 230kw....

I don't think the N1 Block and /or turbos were stock on the RS260 so together with the body kit which I like much better than the stock front bar I would say you have picked up a very nice example.

I got the same from my 260. I had PFC and BC. It was great until it went pop. They really need a lot more than 250 to make them fun though as they are such a piggy.

+1

Mine's a little quicker then standard and quicker then most cars on the road (but feels similar to my wifes 34) but not as quick as you would hope as there such a lard arse, mine was 1760kg's on a local weigh bridge. Just need to find another $1500 for mine (not likely) and go bigger inj's afms etc and shoot for 300+

Still nice figures, with the N1's etc you should be able to crack 300rwkw with a bigger fuel system with awesome response.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...