Jump to content
SAU Community

Recommended Posts

I thought I had sold all my left over gear but a quick look though the shed showed it not to be.

Tein Springs - Unknown rates $50 set

R/H Tail light $30

R/H Mirror $30

R/H Sill panel brand new $80

R/H door with a few dings and motor, no glass $30

Rear bumper support/reo $80

Radiator $40 fit gtr and gtst

Rb26dett block with cradle. Small crack between 2 head bolt holes. Would be fine for a std or mild motor. Original bores and has been freshly decked $200 Only removed due to cracked piston ring land.

Set of gtr interior door and rear trim bits inc head lining $100 A few nicks and scrathes but not to bad.

G sensor $60

A couple chipped GTR ecu's $125 each to suit the usual lights mods

Blitz turbo timer $50

HKS VPC $300

Gtst wing $10

GTR petrol tank with hangers and filler. A small leak in the seam about 5 cm long. Might be able to fix it with a soldering iron. $30

R33 Gtst genuine Jun front bar $400 Not a cheap Aus copy

If you intend to mess me around please don't waste my time. I'm not an internet nerd so therefore don't get on the net every minute of the day so responses might take a couple days. Please don't send multiple pm's.

40 minutes south of city.

i have a 32 and 33 looking for parts for both, do you have r32 gtr bar reo or stock cooler if so how much ?

also could you tell me about these parts below please ?

Tein Springs - Unknown rates $50 set ( are they for gtst or gtr ? )

Radiator $40 fit gtr and gtst ( does it have the fan cover what condition is it in ? )

Set of gtr interior door and rear trim bits inc head lining $100 A few nicks and scrathes but not to bad. ( do you still have this if so and there in decent condition could a have a look very interest ? )

G sensor $60 ( is this a stock or aftermaket part no idea what it is or does could you tell me ? )

Blitz turbo timer $50 ( do you still have this item ? does it have the wires and instructions ? )

HKS VPC $300 ( what is this whats ? whats it do ? whats it for ? )

R33 Gtst genuine Jun front bar $400 Not a cheap Aus copy ( is it painted if so what colour do you have a picture of it ? )

thank you

Tein Springs - Unknown rates $50 set ( are they for gtst or gtr ? ) The springs came out of a gtr with tein HA's in it. Would also fit a gtst I guess as springs are very generic.

Radiator $40 fit gtr and gtst ( does it have the fan cover what condition is it in ? ) The radiator came out of a shell I had. No shroud and will refund money if it leaks.

Set of gtr interior door and rear trim bits inc head lining $100 A few nicks and scrathes but not to bad. ( do you still have this if so and there in decent condition could a have a look very interest ? ) There worth the money I'm asking as they are just taking up space in the shed which is pissing me off. If your after a set of show peices their not for you.

G sensor $60 ( is this a stock or aftermaket part no idea what it is or does could you tell me ? ) Its for the 4wd system in gtr's. factory unit.

Blitz turbo timer $50 ( do you still have this item ? does it have the wires and instructions ? ) It has the loom for a 32 and you don't need instructions to use turbo timers. Very simple.

HKS VPC $300 ( what is this whats ? whats it do ? whats it for ? ) The VPC gets rid of the need to uses afm's on a gtr. they were about $2k new. Deletes the inlet restrictions of afm's. Comes with loom, controller and pressure and temp sensors.

R33 Gtst genuine Jun front bar $400 Not a cheap Aus copy ( is it painted if so what colour do you have a picture of it ? ) The bar is in pearl white but would need to be painted as I have to fix a few small cracks. I'm very handy with fibreglass as I have restored many boats and car bodykits. See attached pics

thank you

post-1670-1238918782_thumb.jpg

post-1670-1238918800_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...