Jump to content
SAU Community

Recommended Posts

you're not actually being serious are you?

those things never actually work...

btw, i thought air is being renovated at the moment..

Have enough people not believing, of course not much works around here. :(

Theres a comment on that group by Flick Tilbrook saying something along the lines of "This petition is old, it was to get AIR re-done and that IS happening, its just not open yet"

Well i don't care what people are saying about AIR as that work was supposed to be finished 18 months ago.

Forget about AIR as ANDRA has said that they will never sanction the track as long as Jane still owns it , and i wanna see/feel Top Fuelers.

Edited by D_Stirls

I've heard that AIR has Asbestos in the dirt mounds that surround the strip and they cant open the track till its all removed.

Not sure if its true or not but that is what i have heard.

agree with Dale there.

i wanna see top fuelers back in adelaide.

EDIT: if that was the case chad, they wouldnt be allowed to hold the Gazzanats, and the likes.

Edited by craig R33

no as long as it's not disturbed then it can stay there, but if they do any work on the mounds or the track is decommissioned (which it will be when the other track is built .....AND THAT WILL HAPPEN, NOT JUST YET THOUGH) then they have to take it all and and safely store it, that is why he will never be able to sell it.

The track is unsafe though which is why ANDRA won't sanction it and the timing wiring was burnt out and needs to be replaced.

chad thats not true

The reason AIR never runs the top fuels or funny cars anymore is because of curfews

since there was residential properties built close to there not long ago the complained to the council that it was too loud

therefore AIR got a curfew of 8pm, hence why the big names wont come over coz they gotta be packed up early

now until the curfew gets lifted i wouldnt be expecting any big names to come over for a veryyyyy long time

the curfew is 11 pm the same as speedway park

The track isn't flat enough any more to run top fuelers, ANDRA told bob jane that he had to completely relay the track (as well as other things) and he told them to get stuffed (as he already had issues with ANDRA over Calder) so ANDRA pulled it's certification and there has never been another top fueler on the track since. i did see the last top fueler run on AIR at my first visit, unfortunately it blew an engine at the 60ft mark but it was insane none the less.

Edited by D_Stirls

My old boss of 5 years was an ex Nitro Funny Car Champion and Chaiman for the back on track committee. I was also told that the track is not long enough to meet ANDRA regs, as well as a long list of other things.

I have fond memories of the old man taking me to the drags to see the Top Fuelers when I was a young lad.

Absolutely amazing watching and 'feeling' it at night. I remember it freaking me out how much my insides were thumping as they are so so damn loud.

AIR was designed to fail from the start, who seriously thought it would be a smart idea to run the qtr mile directly into where the sun is setting from 3pm to 7pm?? just about every meet i saw had a hour or 2 wait while the sun moved.......

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Apologies for the long post, but needed somewhere to lay out the entire timeline of events and actions taken:   I've got an 89 GTR with a R34 RB in it. It's been running great all year, driven probably 500KM in the last month. It's not my daily driver, just a weekend fun car.    Build info: R34 RB26 - HKS 2.7 stroker kit, HKS adjustable cam gears, HKS turbo upgrades, Trust intercooler, R34 factory DENSO 440cc injectors, JUN chipped/tuned R32 ECU. All of this work was performed in Japan back in 2019.    Thursday 10/2/25 - It's a nice day and decided I'll drive it to work, I start it up in the garage and I notice it took a few extra cranks and sounded a bit funny. I figure maybe it was just because it was a pretty chilly morning. I pull it out into the driveway to warm up a bit before leaving. As I leave the driveway, it feels very off and sounds like a misfire. I pull it back in the garage to deal with after work and take the daily to work. I was able to diagnose it as a cylinder 5 misfire with the old spark plug test (unplugging each plug until a sound change with the engine running). I take off the whole ignition system, ignitor, plugs, spark. *Important note, it is still on the R32 ignition system with the separate ignitor system. I test each system with a multi-meter and nothing presents as a smoking gun. I put it all back together and it starts up no issue. I go ahead and order the PRP R35 ignition conversion kit. It should arrive today (10/13/25)   Friday 10/3/25 - Another nice day, car starts up great and drives great all day. Very pleased that everything seems to be OK   Sunday 10/5/25 - Decided I'll take it to play some golf, load up and drive to the course about 25 minutes away. Drives wonderful the whole way there, I pull in the parking lot and the engine completely comes to a stop. I do not recall if it sputtered at all, but just remember all of the sudden the engine was off. I roll it into a parking spot, try to crank it back on and nothing.  It'll crank and crank and not even try to start. End up getting it towed back to my house and push it up into the garage.    Items I have checked: Fuel in the tank Fuel Pump relay Fuel pump fuse  Spark Plugs & gap Coil packs Ignitor    I know the cylinders are getting fuel as the plugs smell like fuel after a start attempt. I tried spraying starter fluid into the manifold and cranking and not even a sputter.    I decided to do the live CAS test (removing the the CAS, ignition on and spinning the CAS stalk to see if the injectors pulse and spark is active). All of the injectors were pulsing and I have spark at the plug. The half-moon end of the CAS did seem very loose, I'm not sure how much play is supposed to be there, but it was more than I expected. There was no in/out play of the shaft, just the tip end that is pinned on had quite a bit of play.    CAS Play video   When I put the CAS back in, I stupidly did not re-time the engine. I know I need to do that tonight, however, I do not think it will start given it seemingly was not the issue. My plan is to do the PRP R35 coil kit and retime the engine at the same time.    I plan on ordering the Haltech Nexus Plug-in ECU once they are available again, but ideally would like to get this sorted before firing the parts cannon at it and potentially adding more variables.    Anything glaring that I am missing here, I'm a bit at a loss?          
    • Get it on a dyno. Get something logging Consult. Run it up and find out what is causing it.
    • Looking for a plenum for rb25 de+t neo  Not looking to push much power maybe 300kw at the wheels, is there much difference in flow for Freddy “Greddy style” compared to original Greddy or options like Proflow or Otaku garage?    I won’t be porting the de Neo head for now as I think it’ll be fine 280-300rwkw but appreciate the help and any experiences anyone has between them and any advice. Thanks  Looking at this plenum for now below 
    • engine wise almost no mods: stock ecu Greddy front mount intercooler Greddy forward facing intake w R33 TB stock fuel system, stock injectors, rail etc. Kakimoto racing hyper 3 inch exhaust system Apexi intake filter New NGK –R BCPRES (.8 gap) plugs  
    • Nice one @Pac - looks like a fair few 1600's there! 
×
×
  • Create New...