Jump to content
SAU Community

Recommended Posts

Hello once again :nyaanyaa:

I went on a hills run yesterday through Chittering with some mates. After a good 1.5 hours of revving the car hard constantly and speeds above 100km/h, we all stopped for about 30mins for a breather/etc.

My car was running right on song, engine temp was perfect, oil pressure was normal, boost all good, etc etc. I opened up the bonnet to check the engine for any other problems and saw that oil had splattered everywhere over the right hand side of the engine bay (where the turbo is). I had a quick look and could not see any leaks. I let the car cool off a bit, then we kept going.

After seeing that the car had been leaking oil i wasn't pushing as hard, although the engine kept singing, not a single thing was out of place.

I came home last night, degreased the engine bay, cleaned everything up, jumped in the pit and hand a look underneath after removing the stone guard/cover. I could not see any leak/s at all, so i'm not too sure what is happening.

My suggestion is that it is an oil leak only appearing under high pressure, i.e. driving it hard like i was yesterday.

Any of you guys got any suggestions?

As always, any help is always appreciated! :(

Link to comment
https://www.sau.com.au/forums/topic/264371-oil-leak/
Share on other sites

where was the majority of the oil gathered around? Maybe have a pic with the area circled in might help.

might just be you simply driving it hard. An oil catch can perhaps might solve the problem if you dont have any noticible leaks normally.

Link to comment
https://www.sau.com.au/forums/topic/264371-oil-leak/#findComment-4520269
Share on other sites

sure its oil leak? When i do driftday and motorkhana, i get a lot of powersteering fluid on the right hand side. They are known to leak when you are cornering hard etc. Chuck on a sock on the power steering reservoir and it should stop the spills

Link to comment
https://www.sau.com.au/forums/topic/264371-oil-leak/#findComment-4521242
Share on other sites

Would be checking your breather hoses, i would be investing in a catch can!

Yeah i've got a mate coming around in about 20min and im going to check everything under the bonnet.

How much can i pick up an oil catch can for?

Link to comment
https://www.sau.com.au/forums/topic/264371-oil-leak/#findComment-4521588
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...