Jump to content
SAU Community

Recommended Posts

150 shot of NOS.

You'll need an engine and new turbo afterwards but it'll be one hell of a ride.....and it's the fastest way to 400rwhp

Cannot be done on the standard turbo and I'm pretty sure it's been covered before.

buy a car from the classifieds already built.

Bit like 3lit332's response tho. be prepared to shell out for a new engine. the last 2 guys that bought supposedly "built" cars up here barely got out the driveway before they shit themselves. :D

thanx just checkn, just wondering how much u can squeeze out of the stockers b4 it reaches the limits.. still tossin up on t04z vs twin 2530's

You might get to 250rwkw - 335rwhp. I know there will be some people on here who have made more on the stockies but it's a dangerous ballgame. AFM's should max out at around 270rwkw give or take. Injectors at approx 310rwkw.

Why would you use a t04z or 2530's for only 400rwhp? They are capable of over 600rwhp...

Anyhow, please read the Dyno Sticky thread, and have a search.

You'll soon get a good idea of what the stock turbos can do, and what aftermarket ones you'll need to hit 400rwhp

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...