Jump to content
SAU Community

Recommended Posts

  • Replies 250
  • Created
  • Last Reply

Top Posters In This Topic

I was down for this but got my missus neice's birthday party that I've promised since the start of the year I'd be at. Pretty pissed too as it's my first chance to test out my new round of mods. Working as hard as I can to get out of it so I might be able to join you down there :banana:

I was down for this but got my missus neice's birthday party that I've promised since the start of the year I'd be at. Pretty pissed too as it's my first chance to test out my new round of mods. Working as hard as I can to get out of it so I might be able to join you down there :banana:

Work hard dude, work hard! Come on big fella do what you gotta do....

yep count me in on this one Ed

Who's Ed???? :banana:

My brother dabbles in photograpgy and has a camera the size of a rocket launcher. I will talk to him about coming out to snap some photos of us while actually on the track, should be sweeeeett.

i also though about a BBQ but heavy meals punctuated by hard driving on the track might add up to vomit inside your helmet.... Has anyone done this before? Maybe a pre-packed subway is the go instead...

Getting information was tough before I went last time so I will post everything I know for yaz...

ALL THE DETAILS:

COST - LICENSE:

You can get out there without having a CAMS license by purchasing a 1-day license for $25. The total cost (including the License) is $125 if you do not have a CAMS license.

If you already have a CAMS license, you need to bring that along and in that case you'll only pay $100.

WHAT YOU NEED TO WEAR:

You need to have an ADR approved helmet, but you don't need to spend big bucks, you can borrow one from a mate or do what I did and check out this ebay shop and purchase one for around the $50 mark.

http://stores.ebay.com.au/teamozimports

You will also need to wear long sleeve shirt and full length pants that are made of cotton or wool (jeans and a long sleeve shirt and you're set)

HOW THE DAY WILL ROLL:

Day starts at 8:50am and goes until around 5pm - you can leave any time you want.

Sign in and pay at the beginning of the day, then Clem (manager dude) will explain the rules on the track, no overtaking on the turns, what the flags mean, etc.. You will get a bracelet which you must keep on to let staff know you have paid.

You will get 6 x 15 minute squirts with about an hour between each one, giving your engine, brakes, etc.. time to cool off.

While you are off the track other types of vehicles will be allowed on, also in 15 minute blocks, racing carts, club cars, bla bla bla.

You will see a whole bunch of different cars, check them out, talk to the owners, and the 1 hour blocks between runs really flies. It's like an all day car show.

You will also get a lot of driving.modifying tips from people there.

If anyone has any more questions I might not know the answer but I have Mallala's details and spoke to Clem quite a bit last time so I might be able to get the answers for you.

I'd really love to see the track full of skylines and stags, even if your car is not where you want it to be, the practice is not timed, so you can go as hard or as easy as you want. Even with taking it easy you can get up to 160-180kph on the straights, can't really do that anywhere else safely and without fear of getting arrested and bashed by the 5-0. It's great fun, you will meet cool people (like me) and you will see cool cars all day. well worth the dosh.

If you want to suss it out, there are quite a lot of people who come just to watch and hang out, so if you are unsure then come out, suss it out, and see for yourself.

Edited by medman2damax
so keen on this man

i am definately going to get a helmet

Do it dude. my advice is to get an open face helmet, after buying a closed one it gets pretty hot in that helmet, believe me. Get an open face one, doesn't look as cool but you will be much more comfortable.

Depending how funds go, i'll be up for this.

A little closer to the date I can organize a place to meet and maybe food/drinks... you will get r@ped if you buy from there, I paid $5 for a can of V!

Do it dude. my advice is to get an open face helmet, after buying a closed one it gets pretty hot in that helmet, believe me. Get an open face one, doesn't look as cool but you will be much more comfortable.

A lot of people recommend full face, open face is good to keep cool but i'd rather have a full face to stop my face being smashed onto the steering wheel. After watching an EVO 9 crash head first into the wall on the back straight a few months ago i'd stick with a full face unless you have a harness.

A lot of people recommend full face, open face is good to keep cool but i'd rather have a full face to stop my face being smashed onto the steering wheel. After watching an EVO 9 crash head first into the wall on the back straight a few months ago i'd stick with a full face unless you have a harness.

good point dude, didnt think of that. i wonder what that steering wheel would taste like....

my only concern for this one is fitting an oil pressure gauge, the in dash one shits itself from time to time. maybe an oil temp too.

anything else i need to make sure ive done on the rb25 before i head out? catch can, oil cooler etc? its only got basic bolt ons and boosted turbo...

Edited by tx3_90

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...