Jump to content
SAU Community

Recommended Posts

Crap brand and/or bald front tyres causing your car to understeer in the wet.

With the wheel spin your diff is probably loosening up from old age.

thanks for that

well my front tyres are new with around 90% tread on it

they must be shit than lol

well i own a 1993 r33 with 180 000kms

but in the dry it spins both wheels

thats what i dont understand??

Link to comment
https://www.sau.com.au/forums/topic/265233-ecr33-diff/#findComment-4531008
Share on other sites

you have a viscouse lsd (sorry for the miss spell) means it wont allways catch lsd. so in the wet its too easy for it to brake traction and doesnt need to spin both. though like hamish said it is probably a bit worn (wear will make it looser and wont catch as oftern)

to fix this you could shim the diff which will make the diff tighter, just dont shim it too far or the diff will be locked. you can buy the shims from nissan for about 5 dollers each, you probably will only need one .8mm one. by memery it will take about 2mm to lock it. its not difficalt to do just a bit of work there should be something in the DIY section telling you how to do it.

panda

Link to comment
https://www.sau.com.au/forums/topic/265233-ecr33-diff/#findComment-4531669
Share on other sites

What brand tyres do you have on the front? Also is the wheel allignment to spec? Because that can also affect understeer/grip. Another factor could be that you have wider tyres on the rear and skinnier tyres on the front causing the rear to force the front to understeer by the rear having more grip.

On the diff, I agree that you should shim it to tighten it up. The viscous lsd's do tend to single spin once they have loosened up over time.

Link to comment
https://www.sau.com.au/forums/topic/265233-ecr33-diff/#findComment-4531802
Share on other sites

i dont think its undrsteer because the front wheels dont grip at all and slide when its wet when i turn hard

it the dry it grips and handles really good

either you've got ordinary tyres or the road surface is very slick and there just isn't much grip when it's wet. I have RE001's and sometimes find the wet grip to be pretty borderline, I was expecting more from Bridgestone's "premium" tyre. However road surface makes a huge difference, old polished bitumen has low grip while rough bitumen still grips well in the wet.

Rear diff choice does affect off-throttle handling, my R31 had a locked diff and would understeer badly into corners if I went in a bit hot. Any car with a 2-way would be similar but not nearly as bad. Standard viscous LSD will have no effect off throttle, they aren't exactly a tight diff.

Link to comment
https://www.sau.com.au/forums/topic/265233-ecr33-diff/#findComment-4541143
Share on other sites

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I see you've never had to push start your own car... You could save some weight right now...
    • Sounds good.  I don't 100% understand what your getting at here. When you say, "I keep seeing YouTube videos where people have new paint and primer land on the old clearcoat that isn't even dulled down" do you mean this - there is a panel with factory paint, without any prep work, they paint the entire panel with primer, then colour then clear?  If that's what you mean, sure it will "stick" for a year, 2 years, maybe 3 years? Who knows. But at some stage it will flake off and when it does it's going to come off in huge chunks and look horrific.  Of course read your technical data sheet for your paint, but generally speaking, you can apply primer to a scuffed/prepped clear coat. Generally speaking, I wouldn't do this. I would scuff/prep the clear and then lay colour then clear. Adding the primer to these steps just adds cost and time. It will stick to the clear coat provided it has been appropriately scuffed/prepped first.  When you say, "but the new paint is landing on the old clearcoat" I am imagining someone not masking up the car and just letting overspray go wherever it wants. Surely this isn't what you mean?  So I'll assume the following scenario - there is a small scratch. The person manages to somehow fill the scratch and now has a perfectly flat surface. They then spray colour and clear over this small masked off section of the car. Is this what you mean? If this is the case, yes the new paint will eventually flake off in X number of years time.  The easy solution is to scuff/prep all of the paint that hasn't been masked off in the repair area then lay the paint.  So you want to prep the surface, lay primer, then lay filler, then lay primer, then colour, then clear?  Life seems so much simpler if you prep, fill, primer, colour then clear.  There are very few reasons to go to bare metal. Chasing rust is a good example of why you'd go to bare metal.  A simple dent, there is no way in hell I'm going to bare metal for that repair. I've got enough on my plate without creating extra work for myself lol. 
    • Hi, Got the membership renewal email but haven't acted yet.  I need to change my address first. So if somebody can email me so I can change it that would be good.    
    • Bit of a similar question, apprently with epoxy primer you can just sand the panel to 240 grit then apply it and put body filler on top. So does that basically mean you almost never have to go to bare metal for simple dents?
×
×
  • Create New...