Jump to content
SAU Community

Recommended Posts

hey people i just got a quick question ? , iv got a r33 series 1 and iv had the chance to buy a apexi power fc that is coming out of a series 2 and i was wondering if it can be remaped to suit my series 1 and if so can it also be set back to defalt for a retune ?

can someone help me please ;-)

Link to comment
https://www.sau.com.au/forums/topic/265389-question-about-apexi-power-fc/
Share on other sites

It will work with no problems at all. As long as its for the same make "R33" (and the same engine) e.g. RB25DET and the car is Manual.

Also, you can reset the tune easily from the menu. Will need a tuner to retune for your mods down the track if you require.

Chris

^^^^

what he said. the instal is as simple as unplugging your ecu and plugging the power fc in. then would recommend taking it to a workshop and getting it tuned for your car

Disconnect the negative terminal on your battery before you f**k around with the ECU.

Im pretty sure s1 and s2 computers are different, got to do with ignitor and coilpacks being different. Check with an online parts supplier like nengun ect and see if theres different part number for the PFC ecus.

Actually Mark Apexi used to have two different model numbers for the Apexi PFC for the S1 & S2...

However on closer inspection they were infact the same unit...

They made two different model numbers on their list to reduce the number of enquires from people asking if there were specific ecu's for the S1 & S2...

Hence the cause of this common question or assumption that there are two units in the standard pfc for the R33 (rb25det models)...

They would have been better off just changing the product description to say "suits S1 & S2" which is what they did in the end...

Bit of usless knowledge for ya...!

Haha..was getting a little worried. Allot of noise about nothing!!! Happy i was still correct! :P

ok nice so i found out that it is coming out of an r33 rb25det 5 speed manual ( the same as mine ) but i also found out the that the car its comming out of is heavly moded ( he used to race it )

so will the tune thats in the pfc @ the moment get me to the tuner without breaking anything cause even though my cars moded its nothing like the car its comming out of ?????

thanks.

ok nice so i found out that it is coming out of an r33 rb25det 5 speed manual ( the same as mine ) but i also found out the that the car its comming out of is heavly moded ( he used to race it )

so will the tune thats in the pfc @ the moment get me to the tuner without breaking anything cause even though my cars moded its nothing like the car its comming out of ?????

thanks.

Thanks for your question. Happy to help.

When the PFC comes out of the "heavily modified" car, I would suggest you don't install this, as it would be using the same tune. (which could be dangerous if he's got increased timing, cam adjustments, injector duty etc).

Your best idea would be to take the PFC with you to your tuner and get him to install it...Takes around 5 minutes max. Very easy.

He (or she), will be able to do this for you.

Also, for my info....where are you looking to tune? My money is on Matty Spry.

Cheers and good luck.

Chris

Thanks for your question. Happy to help.

When the PFC comes out of the "heavily modified" car, I would suggest you don't install this, as it would be using the same tune. (which could be dangerous if he's got increased timing, cam adjustments, injector duty etc).

Your best idea would be to take the PFC with you to your tuner and get him to install it...Takes around 5 minutes max. Very easy.

He (or she), will be able to do this for you.

Also, for my info....where are you looking to tune? My money is on Matty Spry.

Cheers and good luck.

Chris

im actually in maryborough QLD ( so just down the road for you) and i was thinking of taking it to Brad Smith in hervey bay , he tuned my first r33 i had and it was moded to the hilt and he did a pretty good job of it unless you no of some one in my area that is better ?

ok nice so i found out that it is coming out of an r33 rb25det 5 speed manual ( the same as mine ) but i also found out the that the car its comming out of is heavly moded ( he used to race it )

so will the tune thats in the pfc @ the moment get me to the tuner without breaking anything cause even though my cars moded its nothing like the car its comming out of ?????

thanks.

it depends on how different the set up on the other car is to yours? mainly injector sizing.. as your only planning on driving to the tuner and not racing it lol. however if it was my car or one i was working on i'd reset the power fc to the base map just to be safe. depending on if your running bigger injectors u'll need to trim that down then it should run fine.

the far safe option is to just drive the car to the shop and install the pfc there. it only takes about 30 seconds. remove kick pannel, unplug computer, plug pfc in. done. why drive it untuned when it's far simpler just to drive the car with the stock computer and do it at the workshop

the far safe option is to just drive the car to the shop and install the pfc there. it only takes about 30 seconds. remove kick pannel, unplug computer, plug pfc in. done. why drive it untuned when it's far simpler just to drive the car with the stock computer and do it at the workshop

might have larger than standard injectors, z32 afm?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
×
×
  • Create New...