Jump to content
SAU Community

Recommended Posts

Does any body want some of the parts i got? I'll bring them down if anyone wants.

I have a New Throttlebody.

Second hand belts with only 2,000 to 3,000 Km on them and a set of pulleys.

2 sets of blue park/number plate lights (very bright)

100w yellow fog light (H4) (very bright)

03 coupe Headlights

How much do you want for the headlights mate? My left one is pretty badly oxidised and sadly the previous owner told me he tried to rectify it by sanding etc and has probably made it worse - think the only option is to install new ones. I'm guessing you've got JDM projectors now?

  • Replies 174
  • Created
  • Last Reply

Top Posters In This Topic

How much do you want for the headlights mate? My left one is pretty badly oxidised and sadly the previous owner told me he tried to rectify it by sanding etc and has probably made it worse - think the only option is to install new ones. I'm guessing you've got JDM projectors now?

i dont think pauls ones are in its greatest condition either tarun. i wouldnt mind it for a project though paul.

anyways guys maps have been finalised and ill post up stopping sections etc later on today. just still deciding on the bbq area. the last 4 cruises i have conducted were a success but ample carparks for the bbq areas. again this will be on a sunday so it is expected that many family outtings will occur.

we have had bbqs at hillarys and mill point. im thinking maybe burswood this time, however again in the 2nd or 3rd cruise we ended up at burswood around ~4pm and it was abit busy... any ideas?

Edited by xtc
i dont think pauls ones are in its greatest condition either tarun. i wouldnt mind it for a project though paul.

anyways guys maps have been finalised and ill post up stopping sections etc later on today. just still deciding on the bbq area. the last 4 cruises i have conducted were a success but ample carparks for the bbq areas. again this will be on a sunday so it is expected that many family outtings will occur.

we have had bbqs at hillarys and mill point. im thinking maybe burswood this time, however again in the 2nd or 3rd cruise we ended up at burswood around ~4pm and it was abit busy... any ideas?

We should double check you can make the BBQ for food shopping, etc. Tarun told me he has appointment at 4:00pm, so that's one person down. We will decide on this tomorrow.

Where about is Burswood BBQ area? Is that near where we parked on cruise no.2?

We should double check you can make the BBQ for food shopping, etc. Tarun told me he has appointment at 4:00pm, so that's one person down. We will decide on this tomorrow.

Where about is Burswood BBQ area? Is that near where we parked on cruise no.2?

whoever can stay, stays. yes last leg of rd 2.

Hi everyone,

WA VQ-series cruise no.5 has been finalised and continued into its relevant thread (Wa Vq Series Cruise Rd5). Please be advised.

Thank You.

Edited by Victor.T

Hi everyone, it was great to meet VQ-series owners on cruise no.5.

Thank you to all who attended and those who couldn't attend, we look forward to seeing you in future events.

WA VQ-series cruise no.6 will be organised in December (First or second week).

Thank you.

  • 1 month later...

Hi everyone,

VQ-series cruise no.6 will be organised in December. Just for the record of VQ-series cruises, there have been 5 cruises so far and their information can be found on relevent threads.

Official WA VQ-Series Cruise No.6

This event will go ahead ONLY if:

1. There's 5 or more V-series Nissan Skyline able to participate.

2. There's a safe and secure car park, whenever possible.

3. As to make this cruise as much safe and enjoyable as we can, we will try to organise it on a sunny and beautiful day.

We are looking at doing this regularly, or whenever possible.

Cruise Information

Date: 19-12-10 (Sunday)

Time: 1:00pm Meet, 1:30pm Depart - 4:30pm

Place: Powis Street car park (5-10 minutes drive from Citywest car park, Drive onto Mitchell FWY and off at Powis Street exist on the left, Turn left onto Powis street and first left entry into Powis street car park)

Please post if interested and check this tread for updates.

Thank you for your time.

Edited by Victor.T
Hi everyone,

VQ-series cruise no.6 will be organised in December. Just for the record of VQ-series cruises, there have been 5 cruises so far and their information can be found on relevent threads.

Official WA VQ-Series Cruise No.6

This event will go ahead ONLY if:

1. There's 5 or more V-series Nissan Skyline able to participate.

2. There's a safe and secure car park, whenever possible.

3. As to make this cruise as much safe and enjoyable as we can, we will try to organise it on a sunny and beautiful day.

We are looking at doing this regularly, or whenever possible.

Cruise Information

Date: 19-12-10 (Sunday)

Time: 1:00pm Meet, 1:30pm Depart - 4:30pm

Place: Powis Street car park (5-10 minutes drive from Citywest car park, Drive onto Mitchell FWY and off at Powis Street exist on the left, Turn left onto Powis street and first left entry into Powis street car park)

Please post if interested and check this tread for updates.

Thank you for your time.

Yeah i should be in Perth that day (Coming back from York helping a mate with some filming)

Might just see you guys at the meet point then continue north home.

Yeah i should be in Perth that day (Coming back from York helping a mate with some filming)

Might just see you guys at the meet point then continue north home.

Sure, Paul.

Let's hope it's another good turn out this time. :P

Hi everyone,

VQ-series cruise no.6 will be organised in December. Just for the record of VQ-series cruises, there have been 5 cruises so far and their information can be found on relevent threads.

Official WA VQ-Series Cruise No.6

This event will go ahead ONLY if:

1. There's 5 or more V-series Nissan Skyline able to participate.

2. There's a safe and secure car park, whenever possible.

3. As to make this cruise as much safe and enjoyable as we can, we will try to organise it on a sunny and beautiful day.

We are looking at doing this regularly, or whenever possible.

Cruise Information

Date: 19-12-10 (Sunday)

Time: 1:00pm Meet, 1:30pm Depart - 4:30pm

Place: Powis Street car park (5-10 minutes drive from Citywest car park, Drive onto Mitchell FWY and off at Powis Street exist on the left, Turn left onto Powis street and first left entry into Powis street car park)

Please post if interested and check this tread for updates.

Thank you for your time.

Sorry broski - will be in Singapore!

Sorry broski - will be in Singapore!

Hey Tarun, that's ok.

I also thought alot of people might go on holiday around Christmas. How long you be away?

Richard (xtc) is away on holiday at the moment untill the end of November. So we will see how many can come along on 19th of December. If not alot, we will move the date to January or February.

Thanks for letting us know, Tarun. Enjoy your stay in Singapore.

Edited by Victor.T
Hey Tarun, that's ok.

I also thought alot of people might go on holiday around Christmas. How long you be away?

We will see how many can come along. If not alot, we will move the date to January or February.

Thanks for letting us know, Tarun. Enjoy your stay in Singapore.

Will be in Sing for 5 days to visit my brother who lives there then off to India for 3 weeks - will be back 7 January. I've made a premature new years resolution (one of many) to spend a bit more on the V $$$ - so hopefully will look a bit different next year :P

Edited by diabolique
Will be in Sing for 5 days to visit my brother who lives there then off to India for 3 weeks - will be back 7 January. I've made a premature new years resolution (one of many) to spend a bit more on the V $$$ - so hopefully will look a bit different next year :D

Haha, nice.

Going to India as well? I love Biryani :bunny: .

Ok, have a great time in Singapore and India, Tarun. See you when you get back.

Good luck with your exams as well.

All you boys are always going on holidays.

Victor once again we have sport in the morning so we will

have to meet up at one of the meet pionts.But i'm keen

mate maybe numbers will be low dew to you boys making

to much money.Ha Ha

All you boys are always going on holidays.

Victor once again we have sport in the morning so we will

have to meet up at one of the meet pionts.But i'm keen

mate maybe numbers will be low dew to you boys making

to much money.Ha Ha

Hi Kurt,

Yeah, me and Richard both took holidays in November. I just finished mine last week. :happy:

With the cruise, sure you can meet us at one of the meet point. Can you please pm me your phone number so I can let you know the meet points as soon as the map is sorted out?

The number could be lower until we get replys from the VQ-series owners. 1 of my new friend with V35 coupe also misses out because of his holiday, but should be fine with a few others as it is on the weekends before Christmas. Let's hope we get more replys in the coming weeks.

Anyway, thanks for the reply Kurt. Looking forward to seeing you again.

Edited by Victor.T

Hi everyone,

Just an update to let you know that VQ-series cruise no.6 will be posted on www.350z-tech.com and www.zclub.com.au before coming weekends to invite Zeds owners once we get a few more V-series owners to confirm their status.

We would like more V-series owners to come along the cruise as to put the names to faces, and meet some great like-minded VQ-series enthusiastic owners.

Please post up if interested for map printing, etc.

Thank you for your time.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • sold listed as a Tomei LSD 1.5 Way For 1998+ Nissan Skyline ER34 25GT RB25DE w/Open R200 https://www.ebay.com/itm/174006114594?campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=&mkrid=711-53200-19255-0&loc_physical_ms=108689&loc_interest_ms=&campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=71883f2ccc571356e0a757bc7adfdde2&mkrid=710-53481-19255-0&loc_physical_ms=108689&loc_interest_ms= it went in like butter all gears, alignment, back lash etc, rotation and clearances correct, and if rolling all rotates smooth and free when coasting down road , clutch in or out over 10 mph smooth... its the binding, clunking and jerking from a stop that is most concerning, also seems like its going to tear the tires off in 10 miles of normal road driving. 
    • What 1.5 way? There's no such thing really as a 1.5 way, just different ways of explaining 2 ways with different ramp rates. HOWEVER. In any driving in a straight line your 1.5 or 2 or 1.7 way should have no clunking at all. With the clutch fully depressed the diff should be silent (unless it's welded but I'm assuming it's not). Something aint right here.
    • Clutch is a spec brand, new clutch system,( PP, flywheel, friction disc, etc. pull type) installed 100 miles ago, with no problems.
    • looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drove beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...