Jump to content
SAU Community

Recommended Posts

  • Replies 107
  • Created
  • Last Reply

Top Posters In This Topic

nothing wrong with Rexes. Yes, lots of them are owned by wankers, but then again so are a lot of Skylines, v8's, rotaries, etc. etc.

I owned a MY02 from new and at the track, the only Skylines that beat me were highly modded GTR's, and even then I whipped them in the wet. GTSt's didn't even come close - wet or dry. This was at a proper race track, none of this 400m wank. I'm sure that a well modified GTSt in the right hands would have been quicker, but none of the ones I raced were that quick. I'd sold an R32 GTST to buy the WRX, and much as I loved the Skyline, the WRX was all round a better car (being over 10 years newer obviously played a big part of that). Yes, they do tend to understeer under power, but that's no more of a problem than something that wants to spin whenever you get on the power. Both can be controlled at the track unless you're a total gimp behind the wheel,

As others have said, it's all about horses for courses. If you like WRX's, go for it (personally I'd buy an unmodified one, as they can be fragile is mistreated). I do like Skylines (hey, I like anything that's fast) but I can also appreciate what good all round packages WRX's are. I just picked up an MY09 hatch, and the performance blows me away. No other road car has put such a big smile on my dial in a long time.

Plus how many Rex's do you see on the road, you can't go 100 metres without seeing some dude trying to flick it sideways! :dry:

you've just gotta know how to drive it, replaced the front and rear swaybar links with solid aluminium ones from mrt...

you could upset it under braking and step it out (not heaps... not like rallying) ... and then launch forwards and pull through the corner. you dont take the corner like you would in a skyline.. where you start wide, hit the apex, leave wide and throttle on after the apex... smooth and controlled.

in a rex you come in wide, jam on the brakes and turn in, step the back out, aim it at the exit and punch it passed the apex.

every car is different to drive, thats why its best to get a new car to the track and find its limits and its reactions.. that is the only true test to how a car behaves.

Buy a VW, they sound the same as a WRX.

Always disappoints me to hear "bracketa bracketa bracketa pop pop" coming down the road and it turns out to be a Sewingbee and not a VW.

Anyone that calls a flat 4 boxer engine a "horizontally opposed boxer engine" is more wank than willy.

Horizontally opposed boxer engine indeed.......Being a boxer engine what else could it be than horizontally opposed?

Making the obvious sound fancy does not add kw. Does add to the wank factor by 1 though.

Ladyman or ladies man?

In the original post it was stated it was going to be kept pretty stock with basic mods. A wrx with basic mods is a pretty cool little car and personally i like them, they are great fun to drive and pretty decent value. I dont see anything wrong with swapping from your r33 gtst to a wrx and i consider it an upgrade. I love my skylines dont get me wrong but for this situation i think the wrx would be the better vehicle. Please dont flame me for putting my point of view across!! its just that, a point of view, its not gospel.

Edited by mrsparkle
#4 Those who've switched from a WRX to an EVO or 'Line

Err no. They would fall under category 2.

Only three kinds, No more. No less

Yes, I AM taking the pi$$. To each their own, and that will never change. Ask the same question on a WRX forum and you'll get more of a WRX bias, but most will probably still agree that the Skylines are also a very good car. No point trying to force your own opinion onto someone else. If the dude likes Rexes, let him buy one. He won't be disappointed. He might stick with them, or he might want to go back to a Skyline. Personally I haven't gone back, but wouldn't mind owning another one day. Maybe when I clear some other cars out of the shed.

Question you SHOULD be asking is "Why would anyone buy a rex over an EVO?"

find me a brand new EVO for under $40k on the road and I'll buy one. Till then, the Rex does me fine, thanks very much.

would destroy 90% of the GTSTs out there period

Lol your kidding me right? Raced plenty of WRX's, had a bit of fun with my mates 02 WRX the other day with an sti engine and box, VF turbo upgrade, fuel system, ecu etc etc. Supposibly has 215-220@all four and I left it for dead, wasn't impressed at all.

#4 Those who've switched from a WRX to an EVO or 'Line

#5 Those who DONT want a WRX.

Though I wouldnt mind grabbing the model after the bug-eye - have looked at grabbing one of those but decided against.

May not be applicable, but i'll throw in my 2c.

I used to own a 2005 STi - the car was a beast. I twin-scrolled it, HKS 2835 turbo etc. Sounded porn and went hard. My brother currently owns an Evo IX and, without a doubt, it is a better car. Comes on boost immediately and the handling is precise. You can throw them into corners at stupid speeds and just floor it. Go for the Evo. They can make some power, too, and will give most cars a good run for their money in a straight line and will leave you for dead around corners.

#5 Those who DONT want a WRX.

Refer #3 above

Though I wouldnt mind grabbing the model after the bug-eye - have looked at grabbing one of those but decided against.

C'mon. It's OK to admit your secret desires. It's a perfectly natural emotion, afterall :blush:

Hi There People!

Ive had my line coming up three years now. And not that im falling out of love of it. Im thinking of the wrx because i love the sound and i want a 4 door but dont want to get a family car. and also would like the AWD. my line is 96 r33 series 2 m-spec with 140k on the clock... and im looking at selling that and getting a 2000 or less model wrx... :P

What should I do?

I know this is skyline forum but im hoping for people in similar situations rather then pure skyline lovers.

wrx r gay and gtr,s will blow its doors off anyway lol

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
    • @GTSBoy yeah sorry i know thery are known for colors bud those DBA are too in colors 🙂 Green will be good enough for me  
×
×
  • Create New...