Jump to content
SAU Community

Recommended Posts

well i got my car dyno tuned today with the newly installed SAFC (only version 1)

261.6hp (195kw) @ 10psi

I didn't get a 'before' graph sorry guys but the difference is extremely noticeable once you get above 4000rpm. it just screams all the way to redline whereas without the SAFC it felt very hesitant above 5000rpm.

I'm happy with the result.

My mods are:

  • Cheapo pod filter enclosed in cold airbox
  • R34 GT-T SMIC
  • 3" X-Force front/dump, X-Force hi flow cat, Trial cat-back exhaust
  • Turbotech MBC @ 10psi
  • Apexi S-AFC
  • Stock turbo, ecu, fuel pump

here is the graph...

post-46482-1240911261_thumb.jpg

Edited by dnbosiris

looks like a nice curve. Just a shame they didnt do a power run 1st.

Im surprised they didnt run the car on the dyno before the tune actually, what it takes 10 seconds? Then you proceed with the tune, and theres your overlay.

well i got my car dyno tuned today with the newly installed SAFC (only version 1)

261.6hp (195kw) @ 10psi

I didn't get a 'before' graph sorry guys but the difference is extremely noticeable once you get above 4000rpm. it just screams all the way to redline whereas without the SAFC it felt very hesitant above 5000rpm.

I'm happy with the result.

My mods are:

  • Cheapo pod filter enclosed in cold airbox
  • R34 GT-T SMIC
  • 3" X-Force front/dump, X-Force hi flow cat, Trial cat-back exhaust
  • Turbotech MBC @ 10psi
  • Apexi S-AFC
  • Stock turbo, ecu, fuel pump

here is the graph...

That's awesome dude, well done.

getting mine put in on thursday. pretty much the same mods (rb20 actuator not MBC, and catco metal cat) as dnbosiris. excitement!

Let us know the outcome a.s.a.p!

wanna sell me ur safc? pm me :P

x2 :)

Might be worthwhile looking at an eManage Blue or even an eManage Ultimate. The blue is basically a SAFC but with adjustable ignition timing(very worthwhile). The eManage Ultimate is like a lesser PowerFC with a few less tuning options, but on a car with a few mods you won't know the difference. Once concern is that some tuners may not know how to tune the ultimate.

You can pick up a second hand eManage Blue for the same price as an SAFC, and possibly an ultimate for around $500-700. You can get them new with the harness and all software required for under $1000.

how do you it doesn't lean out your car if you haven't had a dyno?
you dont have to get a tune, just pay the $70-80 bux for a power run

GOTrice is correct, if you are going to leave the stock turbo on, stay with the SAFC2 or a neo. at a dyno meet with i was pulling more Hp than some people with power fc's on stock turbos. just get a good tune with it.

Just getting back to you guys, ran it today just to make sure everything is okay (running MINES ECU). Here is a copy, made 207rwk. The graph and ratio looks good to me but im no expert. Mods are as per my signature.

image026q.th.jpg

note thats a 3rd gear dyno run

it should be in 4th, you cant use that to compare against other r33s as the diff gears is different

it shouldnt matter if the dyno is setup correctly, but it does so yours is probably more like 160rwkw

Hi Guys,

I currently own a S2 R33 with the following mods/upgrades:

Front mount cooler

12 psi through turbotech boost controller

3 Inch turbo back exhaust

Hi flow panel filter

Adjustable exhaust cam gear

Everything else is stock and it made around 162kw atw recently on the dyno.

Hmm, yours seems very low for those mods.

My s1 auto pulled 173rwkw with

pod filter

12.5psi with turbotech boost controller

hybrid fmic

3.5" Trust cat back

and lots of misfire due to coil packs... (hence why dyno curve is shit)

th_dynosheet2.jpg

got a 3" split dump and high flow cat ready to go in and waiting for some coil packs... it should make close to 200rwkw with all that.

Oh btw, have you considered a remap? What is your ideal power goal?

Lets say you wanted 300rwkw in the end. Save up and buy all the parts you need for that goal, there's plenty of info on here. Buy everything you need, put it all on at once and get a one off remap. In SA most people use r32 ecu's remapped for the rb25, you loose vct but the overall gain is a lot bigger anyways.

I personally don't know that many people who have bought a PFC, did everything they wanted to and then kept getting it re-tuned. Usually they just get a proper tune and leave it. 2k wasted imo, considering a remap with r32 ECU retails around $500 these days including the tune (in SA anyways).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...