Jump to content
SAU Community

Recommended Posts

Phatt Audio Concepts (PAC) Phast and Phurious Drive in

Phatt Audio Concepts are hosting a Cruise to Celebrate Fast and Furious 4

We’re calling on the owners of all cruisers, tuners, old and new skool alike... to make this the biggest night that Lunar Drive In has seen in a long time.

We will be honoured by the presence of the Alpine Imprint Nitro,

We will hopefully have one of the city’s best automotive photographers coming along as well to snap a few shots

And as always we will have plenty of giveaways...

There will be judges walking around giving Heaps and Heaps of giveaways from Alpine and Boston and more for the winning cars on display !!

Start Time: 02 May 2009 at 15:00

End Time: 03 May 2009 at 00:00

Location:

Lunar Drive In Cinema

Street:

South Gippsland Fwy

Town/City:

Dandenong, Australia

Email: [email protected]

We are hoping to rally the troops for a seriously fun night out and maybe even provide some networking oportunities for all our Phriends and Phamily alike...

...We have some seriously cool giveaways and we've organised 3 movies for ya'll to enjoy...

Entry price will be $19.50 per person at Lunar...

Meet Point will be Phatt Audio Concepts 1/11 Heland Place Braeside, Vic at 3:00pm

We're allowed access to the drive-ins at 5pm which gives us time to have a bit of a perve on each others rides as the sun goes down...

Invite and bring your friends but please so hooning or we won't invite you back...

*If Saturday looks like rain, event will be reshceduled for Sunday*

For more info send an email to

[email protected]

or send me a PM

Phatt Audio Concepts

Unit 1

11 Heland Place

Braeside Vic 3195

Ph: 03 9580 1282

Fax: 03 9580 1283

www.phattaudio.com.au

[email protected]

post-35027-1240384885_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/266597-phatts-phast-and-phurious/
Share on other sites

Guest
This topic is now closed to further replies.


  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...