Jump to content
SAU Community

Traffic Hazard (avoid Whites Road, Salisbury)

Tommmo

By Tommmo,
in South Australia

 Share

Recommended Posts

Tommmo Proficient

Tommmo

Posted
Posted (edited)

Just a warning to all those that might be driving through the area.... SLOW down!

Or avoid the road all together if your car is lowered or have low front bar.

There's a "Hazard Ahead" sign, but no indication to slow down.

I was in my Chaser, travelling along at 50, behind another vehicle and didn't notice the massive slabs (3 of them, 10m between each one) of road which the council has cut out and filled in with dirt and with todays rain...all the dirt has eroded. Each ditch is around 8-10cm deep!

I hit the first one at 50km, by the time I realised what happened and reacted, I was going through the second one around 40km.

I pulled over right away and checked to see if there was any visual damage, couldn't see too much, but driving home I noticed it definitely didn't feel the same!

The alignments all out, the steering wheel now wobbles like a b*tch and there's a knocking sound coming from the back! NOT HAPPY! >_<

Fingers crossed the wheels aren't buckled!

Edited by Tommmo
Tommmo Proficient

Tommmo

Posted
  • Author
Posted

I took a couple of pictures with my phone last night, they didn't come out too good though.

Thought about going back there this morning, but its on the other side of the city for me and knowing my luck they would have filled them in by the time I get there.

post-20233-1240538385_thumb.jpg

Tommmo Proficient

Tommmo

Posted
  • Author
Posted
i live round the corner, but im at work. ill see if i can get some at some stage tonight or tomorrow.

That would be great! much appreciated..

To the mechanics I go.. fingers crossed its nothing too serious!

Tommmo Proficient

Tommmo

Posted
  • Author
Posted

all 4 wheels are buckled!!

front are quite noticable, rears not so much.

called the council, apparently they are not responsible for the road works, there's a new development between Blaess Dr and Belperio Cl and the builder is in charge! :)

post-20233-1240546877_thumb.jpg

Tommmo Proficient

Tommmo

Posted
  • Author
Posted
1: find some bent high end expensive wheels

2: get them for dirt cheap

3: put on car

4: claim they were damaged by the roads

5: ????

6: profit

Hahah.. there's a thought!

Just not my style though

Murry33 Experienced

Murry33

Posted
Posted (edited)

Damnn, i had similar thing happen in my old skyline. i went to turn a corner and there were concrete pieces all over the road, something had hit the corner before, but by the time you see if you've turned the corner and drove all over it!

long story short, i bent my sparco wheel, waited 2 hours for a tow lol :). luckily was fixable though

Edited by Murry33
Tommmo Proficient

Tommmo

Posted
  • Author
Posted
Damnn, i had similar thing happen in my old skyline. i went to turn a corner and there were concrete pieces all over the road, something had hit the corner before, but by the time you see if you've turned the corner and drove all over it!

long story short, i bent my sparco wheel, waited 2 hours for a tow lol :). luckily was fixable though

that sucks!

how much did it cost to fix?

I was told mine are fixable, but at $200-$300 per wheel plus a wheel alignment! i'm not happy!

I'm not paying for someones negligence!

SLED Grand Master

SLED

Posted
Posted
There's a "Hazard Ahead" sign, but no indication to slow down.

Hate to be the bearer of bad news, but if the above is actually the case, they may use that to waive any responsibility (hazard sign generally means, 'slow down & look').....having said that, if it's as bad as you say, they should have zoned that area off.

And as far as the council not having any liability....huh?!

Even if they are private contractors, I would've thought the council would have to be the overseers of the project.....public road isn't it??

SLED Grand Master

SLED

Posted
Posted

This reminds me of a similar thing that happened to me.

It's amazing how quickly councils and contractors pass the buck to each other when stuff like this happens.

A few years ago I parked in the Elizabeth City Centre car park and put my front wheels against one of those concrete sleepers that are held into the ground with 2 spikes (rio rod).

Unfortuantely, one of the spikes were sticking out approx 6 inches so as I drove forward the spike got hooked under my front bar (didn't even hear it).

When I reversed out it ripped my whole front bar off the car.......consequently my bloke got away.

Tried the Centre Management, didn't want to know me, "council's problem".........tried the council, did't want to know me, "Centre Management's problem".

Went back and forth a couple of times before going into the Magistrates Court and paying $80 for a Letter of Demand which I sent to the Centre's Maintenance Dept and they couldn't pay me quick enough cause I threatened to charge them for a lost day's work as well at $150ph.

Tommmo Proficient

Tommmo

Posted
  • Author
Posted
Hate to be the bearer of bad news, but if the above is actually the case, they may use that to waive any responsibility (hazard sign generally means, 'slow down & look').....having said that, if it's as bad as you say, they should have zoned that area off.

And as far as the council not having any liability....huh?!

Even if they are private contractors, I would've thought the council would have to be the overseers of the project.....public road isn't it??

I spoke to the council and the contractor.

The council says the contractor has a due care to keep the road in a safe state, which they didnt. According to them, If the road was in a state to cause damage to my vehicle at 50km/h, there should have been additional safety measures, be it signage, patrol, road closure etc.

The contractor said the signage was sufficient and believes road was in a safe state!

They have asked me to send them a copy of photo's and they will review my claim.... I think I already know the verdict!

SLED Grand Master

SLED

Posted
Posted
The contractor said the signage was sufficient and believes road was in a safe state!

They have asked me to send them a copy of photo's and they will review my claim.... I think I already know the verdict!

Clearly the road was not in a safe state with your photos being evidence enough.

You're 1/2 way there....the fact that they've even asked for photos indicates that they are liable for road safety measures as opposed the council.

Now you just have to know how to handle the situation and not take their bluff as gospel or take no as an answer.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      R34 GT-T cycling ABS pump

      By Kinkstaah · Posted

      Lets say I wanted to buy this, specifically for this purpose. How do I actually perform the function. Can I still buy a Consult-1? Am I about to be burned by the fact my car is a 2000 model Series 2 R34 and thus will be some stupid other system? Do I just need this -> https://obd2australia.com.au/product/nissan-consult-14-pin-to-usb-ddl-diagnostic-interface-with-ftdi-ft232r-chip/ And with what software?
    • GTSBoy
      33 GTR Broken front wheel knuckle

      By GTSBoy · Posted

      That's probably OK. That's a face to face compression joint between two surfaces with the clamping load provided by those bolts. So.... it's unlikely that the bolts will end up feeling that load in shear, unless the clamping surfaces are not large enough, bolts not got enough tension on them, etc etc to prevent the two faces from moving wrt each other. Which... I would hope the designers have considered, seeing as it's probably one of the most important things the upright has to do apart from resist collapsing in its own right. But yes, it would definitely be worth asking them what their safety factor on that part of the design was. I tend to think that the casting, being a casting, is not necessarily the strongest bit of material in the world. It's about an inch square, and when you think about the loads that are being put into it, you have to wonder what safety factor the Nissan boys (and every other OEM engineer who has designed all the millions of other uprights that look essentially the same) used to account for defective casting, aging, severe impacts on the wheel, etc etc. 
    • R32 TT
      33 GTR Broken front wheel knuckle

      By R32 TT · Posted

      Those bolts would be orders of magnitude stronger that cast aluminium though.  And its mainly clamping force, not shear they are dealing with?
    • MBS206
      33 GTR Broken front wheel knuckle

      By MBS206 · Posted

      Except all that twisting force that is breaking a cast piece, appears to be going through 4 bolts in the picture Johnny posted of the BryPar one...
    • GTSBoy
      R34 auto to manual conversion help

      By GTSBoy · Posted

      The smart approach is to use the gearbox loom from the manual car. Makes it a lot easier - just plugs into the switches on the box and plugs into the main loom up near the fusebox. Then you only need to deal with bypassing the inhibit switch. The other approach requires you to use the wiring diagram to identify those wires by colour and location, perhaps even indulging in a little multimeter action to trace them end to end to make sure, and then.... you will have the answers you need. The R34 wiring diagram is available on-line (no, I do not have a link to it myself - I would have to do a search if I wasn't able to go to the copy I have at home).
×
×
  • Create New...