Jump to content
SAU Community

Recommended Posts

Item:

R33 Bodykit imported from Japan. Brand is Parts Station Duce http://ps-duce.com/r33-2dr.html.

Kit consist of:

1 front bar

1 rear bar

1 pair side skirts

DOES NOT include eyelids, front/rear fenders, bonnet, wing. i do however have front fenders and stealth wing for sale (see my other threads)

Location:

Brisbane (Southside)

Item Condition:

Still in gel coat from when i purchased. Never even trial fitted them.

Reason for Selling: .

No longer own a R33

Price and Payment Conditions:

$1200 perfer local pickup.

Willing to drive to meet up (within reason...).

Will ship at buyers expense/risk.

Pictures:

Click for larger image...

th_r33-2dr-4_600x450.jpg

th_r33-2dr-5_600x450.jpg

th_r33-2dr-6_600x450.jpg

Contact Details:

0438 730 911 (SMS ONLY PLEASE)

[email protected]

Link to comment
https://www.sau.com.au/forums/topic/266842-r33-body-kit-imported-from-japan/
Share on other sites

  • 11 months later...


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...