Jump to content
SAU Community

Recommended Posts

  • Replies 80
  • Created
  • Last Reply

Top Posters In This Topic

Originally posted by SLYWPN

This dyno is way low for sure!!  

RiggaP said he ran a 13.8 or something with a dyno result of 141rwkw... For your car to run high 13's you have to be pushing about 180rwkw plus..

I had my r31 dynoed at Goodguys in bayswater and got 160rwkw @ 12psi and I know my car is probably good for low to mid 14's..

Take it to the track, see what sorta MPH you get

170rwkw for a high 13? i dunno about that...

i only have 142rw according to goodguys and sam ran a 14.08 @ 93MPH running 10psi. When it was on the dyno it was running 14psi... i guess its more the driver than power.

Guest RedLineGTR

OKay your results at the 1/4 mile depends on the driver/conditions/mods/experience etc...with dyno results when your getting shit tuned and added to your car...stick with one workshop then u know how it rates in the kw scene..if u want high readings go to AVO and see what thier dyno reads..they are know for high readouts...like mentioned rwkw dosent always mean alot it depends how u use it and put it down to the ground..

Guest RedLineGTR

tuner also have different styles of how they like to tune sometimes that ask u sometimes they dont... u can tune your car to be reliable and have great responce or u can have it tuned to its full poetenital thoe risking reliablilty depends on what u want and what the tuner and do for u.

Originally posted by pushead

i wouldnt mind now taking my car to the stripes. Want to see my 1/4 times. :P Thanks all for making me feel at ease with my results.

ive got some house paint somewhere u wot have to take it i will bring it to u with a roller... u want 2 fat stripes down the middle or just one? :)

Today just dynoed at BMT, had some dramas coz one of my coil packs did not work above 10psi so at 9psi made abt 147rwkw mods r:

SAFC2

ITC

3" 5 zigen exhaust system cat back

apexi pod filter

ARC FMIC

tomorrow gonna fix up the coil packs and up the boost to 13psi. Will let u guys know the figures

cool man i think my car is running 11 or 13 with 141rwkw at bmt dyno. mods are

SAFC (1 :D)

i have no idea what an ITC is lol

3.5" HKS superdragger cat back with 3" hiflow cat and front pipe

k&n filter

and thats it with power mods i think once your coil packs work and use more boost you should get more power me thinks.

should be good to find out what the results are

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Jack the back of the car up, pull that wheel off, pull that sensor out, and put a bore scope into the hole to inspect the outer casing, see if anything looks damaged before you pull the whole thing apart.
    • Ergh... So I pulled the speed sensor out again and the tip was shiny so I think it's rubbing the bearing. The bearing contains the magnets for the speed sensor so I think when the first sensor broke it damaged the magnet ring on the bearing.  This is just a Google image, but there is a hole going to the bearing. So when the tip broke off the old sensor I'm guessing it fouled the bearing... As the magnet is only protected by a plastic cover it would be easy to damage it. So I guess I'm doing a bearing again.   
    • My thinking is that if the O2 sensor is shot then your entire above described experience is pure placebo.
    • Here is the mess that I made. That filler there was successful in filling dents in that area. But in the middle area. I can feel dents. And I've gone ocer it multiple times with filler. And the filler is no longer there because i accidently sanded it away. I've chased my tail on this job but this is something else lol. So I'm gonna attempt filler one more time and if it doesn't work I'll just high fill primer the door and see where the issues are because guidecoat is of no use atm.
    • Ok, so I think I sort of figured out where I went wrong. So I definitely overthinked it, and I over sanded, which is probably a large part of the problem. to fix it, I ended up tapping some spots that were likely to be high, made them low, filled them in, and I tackled small sections at a time, and it feels a lot better.    I think what confused me as well is you have the bare metal, and some spots darker and some are lighter, and when I run my finger across it, it' would feel like it's a low spot, but I think it's just a transition in different texture from metal to body filler.    When your finger's sliding on the body filler, and crosses over to the bare metal, going back and forth, it feels like it's a low spot. So I kept putting filler there and sanding, but I think it was just a transition in texture, nothing to do with the low or high spot. But the panel's feels a lot better, and I'm just going to end up priming it, and then I'll block it after with guide coat.   Ended up wasting just about all of my filler on this damn door lol  
×
×
  • Create New...