Jump to content
SAU Community

Recommended Posts

h i here is a list of parts i no longer need . all parts are in sydney.

contact by pm.

original throttle body and tps from my R33 rb25det top condition $100 ono

2000 wrx air box and snorkel top condition $130 ono

Greddy throttle body Adapter for greddy plenum $100 firm

exeddy sports organic clutch for rb25det ,working fine you can see where it was slipping from having to much hp i used this for 6 months and then got a better one great for 260 kw atw. $150

r33 gtst gear box mount good condition $30

r33 gtst engine mount 1 only good condition $20

intercooler 76x600x300 from shift performance top condition no damage at all good for 300 + kw $200

s/s intercooler piping 2.5inch this will suite a greddy plenum set up there is also one from the turbo with bov mount for a r33 gtst $120 ono

silicone joiners and clamps $60

2 3.5 to 2.5

1 2.5

1 from throttle body to 2.5

1 original elbow 2.5

the intercooler ,piping and silicone joiners can be sold as a full kit for a greddy plenum set up

Edited by WARLORD
Link to comment
https://www.sau.com.au/forums/topic/267320-r33-parts-and-one-wrx-air-box/
Share on other sites

is the intercooler a stealth?

If it is how much for the whole package?

sorry intercooler is sold,but all other things are still for sale

thanks princess01

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
×
×
  • Create New...