Jump to content
SAU Community

Recommended Posts

Hey all,

quick question.

The middle muffler / resonator part in the middle of the stock system, is it just a noise reducer or drone reducer or what?

Will removing it make the exhaust louder? I do have a after market muffler but it could be that tiny bit louder. Its deep but needs an extra kick.

Or will it stuff with epa if i take it out etc etc

Thanks all.

Edited by V35 Matt

i wanted to get the same thing done, and had the same view about the noise....it does make a difference from the couple of 350z vids ive seen on youtube.

Yes it is only a resonator...and btw whats epa?

Hey all,

quick question.

The middle muffler / resonator part in the middle of the stock system, is it just a noise reducer or drone reducer or what?

Will removing it make the exhaust louder? I do have a after market muffler but it could be that tiny bit louder. Its deep but needs an extra kick.

Or will it stuff with epa if i take it out etc etc

Thanks all.

Just a resonator.

Cat converters affect EPA.

So how much will it increase flow without it? and how much louder will it get?

I dont want stupid loud, just enough rumble.

I doubt there would be any kind of meaningful flow increase.

Put it this way, my Fujitsubo Legalis 3" exhaust has a resonator on it in a similar style, and that thing flooooooowwwwwwssssss.

It has more to do the size and design of the pipe than having a resonator.

Would be a bit louder than stock. Don't think it would be enough to fail a noise test though.

Why not just have a larger rear muffler installed?

Or even just a larger tail pipe.

Edited by iamhe77

I asked Midas about it, and they said that the main muffler down the back is so large that removing the mid muffler wont be a huge difference, or maybe not a difference at all....but im thinking, nissan did put it there cuz maybe the stock rear muffler wasn't cutting it. Not that im saying it was a last minute bolt on, just my theory on it.

the resonators on my car are gone

car sounds a bit raspier at higher revs

normal driving no difference

so BLISTIC your running the stock system without the resonator?

I had a look on this thread and they were talking about the exhaust components on a 350z...and said "The OEM Mid pipe consists of 60mm mild steel piping with several mild bends and curves. There is a short resonator muffler near the Y Pipe end which some 350Z owners have chosen to remove claiming performance gains and a more aggressive exhaust note"

http://www.350z-tech.com/zwiki/Exhaust_system_overview

I had a look on this thread and they were talking about the exhaust components on a 350z...and said "The OEM Mid pipe consists of 60mm mild steel piping with several mild bends and curves. There is a short resonator muffler near the Y Pipe end which some 350Z owners have chosen to remove claiming performance gains and a more aggressive exhaust note"

http://www.350z-tech.com/zwiki/Exhaust_system_overview

that is basically what i have done

i dont know about performance gains cos i dynoed it at 177.1rwkw seems about right

just the exhaust note when you floor it, sounds a bit better.

You will find that the resonators that fujitsubo use are simply "straight thru" cans. e.g, theres nothing really in them.

That's right.. well mostly.

As you can see, one of the "cans" is blanked which I presume aids in reducing the noise considerably.

FujitsuboLegalisR.jpg

Why would you want something in them?

Turbo + high flowing Exhaust = :wub:

I was offered a "high flowing" custom exhaust for my car, but to keep the sound down, he would pack the muffler with steel wool.

I would imagine this would eliminate the "high flowing" capabilities of the unit!

cutting out the resonator n putting a straight pip thru is like 40-60 bux at an exhaust shop. you shouldnt go wrong. ive done it to my s2000 and it get throatier sound, thats it. cant really go wrong for $50. you can always weld the resonator back in if you wanted to.

the difference would be audible only, power wont change from this...

the illusion of power being that of a slightly higher exhaust note is all **UNLESS** you had an aftermarket exhaust on and the resinator was actually restricting things...

sounds stupid, but does happen on a lot of imports, last car I bought and brought over, pulled the resinator out, and it was a 3" pipe / resinator

but on further inspection the 3" resinator was hollow and had a 2" resinator welded into it... hard to explain and i've lost the pics... in that instance

removing it = more power

:D

I might be interested in trying this though, for $50 etc, you know when you stick it to these cars they get a little throaty, for purely wank factor

little bit more of a throaty sound never hurt anyone :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...