Jump to content
SAU Community

Recommended Posts

I am trying to work out why Taxi's are aloud to have their meters sitting on the dash blocking their vision when us humble car enthuisiusts get pinged for having a gauge on a pillar mount not blocking our vission. Come on if one rule applies to us it should apply to all vehicles on the road, your thoughts.

Link to comment
https://www.sau.com.au/forums/topic/26786-double-standards/
Share on other sites

i spoke to a guy whom does all our vehical inspections and he told me that aslong as the item doesnt affect vision its fine.

another case of double standards. in wa from what i understand roll cages are a no no (i could be wrong here) but BHP have all the mine site vehicals fitted with role cages and no problem what so ever.

Link to comment
https://www.sau.com.au/forums/topic/26786-double-standards/#findComment-565235
Share on other sites

The whole thing is, it is either legal or not, simple, it should not be open to interpretation from one person to another. If you went to court for being pinged for guages on the dash, couldnt you use the Taxi case in favor of your defence to prove that the meters in taxis are more of an obstruction of you view than pillar gauges?

Link to comment
https://www.sau.com.au/forums/topic/26786-double-standards/#findComment-565241
Share on other sites

that probally wouldnt work. if in the rules it shows that you are in the right and you explain this to the officer, as much as he will love being told how to do his job (they dont TRUST ME) and he still persists to give a sticker then you could try sue him for damages. only if the sticker was removed with out any changes. but in order to be able to do this i would recommend you keep a copy of the adr rules in your car for such situation.

i have nothing against police, they do a hard job. but if they want to bend the rules they will get caught out for it one day.

Link to comment
https://www.sau.com.au/forums/topic/26786-double-standards/#findComment-565246
Share on other sites

R31heaven - you've been thinking the samething I've been thinking for ages !!

The amount of times I've been in a Taxi (or seen them drive past) and they are a short bloke that has problems seeing over the dash board let alone seeing over the damn computer that's screw to the top of the dash board is a joke.

Anyone who says that they don't block your vision to the road needs to have a good look at some of the taxis going around.

The other argument going around about A pillar gauges is that they will cause head injuries in a accident.

Well 'if' my head get's past the airbag, I would much prefer to headbutt a (rounded) plastic thing, than headbutt a metal framed square box that has a sheet metal shade cover on the top of it that's sticking out 3 inches !!!

Sadly there will always be one set of rules for some, and another set for others.. :(

just my 2c, for what's it's worth :)

Link to comment
https://www.sau.com.au/forums/topic/26786-double-standards/#findComment-565275
Share on other sites

Leave the pillar gauges off and Mount a small gaudge were Taxi's have it and see what Happens :( I was using the pillar gauge as an example. i bet you get defected. I hope you can see were I am comming from :) I dont have gauges on my car so I dont care, I just find it amusing.

Link to comment
https://www.sau.com.au/forums/topic/26786-double-standards/#findComment-565582
Share on other sites

Warpspeed, the taxi's i see have their screens, radio and shit mounted above the dash and up on the a-pillar, these things would obscure their vision of the road and be a safety hazard in an accident. I've seen these taxi drivers with their stuff hanging off the a-pillar and even using it as a pen holder with pens sticking out of it...

no double standards my ass. if these taxis werent allowed to have this stuff mounted on their a-pillar then i would see how its fair, but different rules for taxi drivers and regular cars on the road its stupid.

Originally posted by Jay95R33

Anyone who says that they don't block your vision to the road needs to have a good look at some of the taxis going around.

..yea-huh! :uh-huh:

Link to comment
https://www.sau.com.au/forums/topic/26786-double-standards/#findComment-565588
Share on other sites

This is a grey area...

I have both the current ADR's CD-ROM and a copy of Queensland Transport's Vehicle Modification PDF. There is made no mention anywhere about pillar mounted gauges. But there is plenty of info on the legalities and requirements of bonnet scoops/projections/gauges. I'd be interested to know if this applies with gauges fitted inside a car.

Link to comment
https://www.sau.com.au/forums/topic/26786-double-standards/#findComment-565623
Share on other sites

The government is like someone making a joke, and even though the joke is funny, the person saying the joke is an idiot, so it just isnt funny no matter what way you look at it.

It amazes me that a police officer has a right to search your car because he has a feeling you might be storing drugs.. or he has a suspicion your car may be ""defective"" (also known by car enthusiasts as upgrades)

Before you know it we'll be 'patted down' on every corner and in shopping centers randomly for drugs and weapons by police.

Link to comment
https://www.sau.com.au/forums/topic/26786-double-standards/#findComment-565660
Share on other sites

serious how many accidents occur do to having gauges on the pillar?? not one, its not like ur not gonna see the car on ur right due to a 5 inch taco. sadly the aust govt has taken it as their mission to protect the 'ignorant and uneducated' people by having all these regulations and laws(not only to cars).the govt thinks prople cant think for themselves, this is y there r no ads for smoking because people would b more tempted, softdrinks neva came out in blue as the colour blu was only used for kerosene etc, also why u see labels on toys saying ' not recommending for use by child unda 3 yrs' or 'contains potential chocking bits'. it happens in most capitalist countries as some regulation is obviosly neccessary, but i think australia may b the stricted in the whole world. in a truly free country the govt would hav no part in this.... i didnt say a place like this existed though

Link to comment
https://www.sau.com.au/forums/topic/26786-double-standards/#findComment-565873
Share on other sites

o and dont forget actual p plates obstuct view too, and if they r mounted on the outside of the vehicle wouldnt they b a 'potential' hazard to pedistrains if an accident may occur, as are t wings, bonnet scoops and gauges on the outside of vehicle?? more double standards for yous to think bout

Link to comment
https://www.sau.com.au/forums/topic/26786-double-standards/#findComment-565881
Share on other sites

Another thought, taxis are classed as commercial vehicles, not passenger cars.

Now commercial vehicles can get away with all sorts of special requirements, things like garbage trucks and road sweepers with left hand drive, mobile cranes with all sorts of crap hanging right in front of the drivers face for example. There are not the same limitations with engine swaps either. You can even register a fork lift, and a lot of people do. So things like ground clearance, windscreens, and lighting do not apply either.

It may well be that taxis are exempt from some of the restrictions about mounting stuff inside the car, because it is "required" for a specific commercial purpose?

Link to comment
https://www.sau.com.au/forums/topic/26786-double-standards/#findComment-566284
Share on other sites

Originally posted by redline2003

o and dont forget actual p plates obstuct view too, and if they r mounted on the outside of the vehicle wouldnt they b a 'potential' hazard to pedistrains if an accident may occur, as are t wings, bonnet scoops and gauges on the outside of vehicle?? more double standards for yous to think bout

due, sticky p plates for windscreens ARE illegal.

just mount one gauge all the way at the bottom of the a pillar where it meets the dash, thats where i have mine, cops see it all the time and dont pull me over, i suppose they could still get you for it being a distraction from the road or the lights too bright or something though.

we will never win just try to minimise the damage

i like cops, some are just worse than others

Link to comment
https://www.sau.com.au/forums/topic/26786-double-standards/#findComment-566300
Share on other sites

i had my p plates in vic, where we have them on the inside, then moved to nsw and had my nsw plates on the inside and got given 2 fines on the same road within 30mins for having them on the inside (all up 4 points!).

Im sure in vic if i had them on the outside they would probably pull me over and give me a fine for that hey.. easy money

Link to comment
https://www.sau.com.au/forums/topic/26786-double-standards/#findComment-566577
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...