Jump to content
SAU Community

Recommended Posts

I want to change my gearbox oil and diff oil. I know that Redline is one of the best oils for a car's gearbox. Helps synchro's work better.

BUT. I remember hearing/reading that the lightwieght shockproof gear oil is corrosive for the gearbox.

On the website it says:

A unique gear oil designed to lubricate racing transmissions and transaxles which see serious loads (not recommended for most syncro-type transmissions).
.

Does that mean it will corrode your gearbox. I also hear it only lasts for 10,000kms. Not 80,000 like normal gear oils.

And will that corrode the LSD of my R32, with a RB25DET engine and box.

So I was wondering if I shoudl just get Redline superlight shock proof oil. Or Royal purple maxgear.

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/267969-gearbox-redline-oil-vs-royal-purple/
Share on other sites

I have only had good experiences with Redline Shockproof oils in my R33 GTS-T.

I run Shockproof Heavy in the diff and it has tightened up the diff quite nicely. I also tried it in the diff of my R33 GTR but it tightened the diff up too much to the point where it was becoming more of a locker so I swapped it over the Motul instead.

I have used Shockpreef light in my GTS-T gearbox with no problems. It seemed to smooth out the synchros and improves gear changes. I change my drive train lubricants every 20k and they come out nice and clean. My son then reuses the shockproof light in the gesrbox of his Mazda 626 with no problems.

Redline oils are expensive and these are my experiences.

shock proof is recommended for gearboxes that are in good condition it is able to be used in syncro gearboxes but only if they are in good nick no syncs crunching and all that otherwise your box will have a much shorter life i run heavey weight shock in my rb25 box and its great smooth shifts and engages great recommended it but be prepared to choke at the price

My memory is opposite: MT90 for good condition transmissions, light shockproof to help worn synchros work better (so postpones the inevitable gearbox rebuild). Ring Redline for confirmation.

I emailed them. I hear the distributor is in Ozy Park, So I will call them.

Yeh, pretty sure shockproof is only for race use and worn box's. Not good condition ones. Its either too slippery or just corrosive

^^^i was also under the impression to use it on race cars or worn boxes.

was thinking about putting it into my rb25 box but am a bit undecided if i should use this or use castrol vmx80 with nulon additive.

my gearbox crunches 2nd unless i shift at quite low revs :)

^^^i was also under the impression to use it on race cars or worn boxes.

was thinking about putting it into my rb25 box but am a bit undecided if i should use this or use castrol vmx80 with nulon additive.

my gearbox crunches 2nd unless i shift at quite low revs :)

Redline is a real good brand. The normal MT-90 oil they do for good condition gearbox'. Thats what I recomend

MT-90

Popular in Nissan, Toyota and Mazda manual transmissions and transaxles as well as other selected applications, this is a 75W90 GL-4 Gear Oil that’s slightly heavier than MTL. Provides excellent protection of gears and synchronizers and its balanced slipperiness provides a perfect coefficient of friction, allowing easier shifting.

--------------------------------------------------------------------------------

Car - Nissan - Skyline

All-2001 GTS & GTS-T (single turbo) (R32,R33,R34) RB25 & RB25T Eng, 2500cc, 2WD

Component Recommended Oil / Fluid

Motor:

Select your closest climate range. For -10°to25°C use '5W40' or 5°to35°C use '10W40' or 15°to50°C use '15W50'. (* Racing Only - use Race Oils) @ see handbook for Litres

Manual Gearbox:

Select your closest climate range. For -10°to25°C use 'MTL' or 5°to35°C use 'MTL' or 15°to50°C use 'Superlight Shock'. (* Advantage option for Performance / Racing use 'Lightweight Shockproof'.) @ see handbook for Litres

Rear Diff:

Red Line '75W90' Gear Oil (* Advantage Option for Racing use Red Line 75W90) @ see handbook for Litres

Power Steering:

Red Line Synthetic Power Steering Fluid (Bar Code Nos 30404 or RL182-1) @ 0.9 Litres = 1 US Quarts

Cooling System:

Use WaterWetter (Pink) to improve temperature control and reduce corrosion. 1x355ml bottle with distilled water. @ 1 Bottles

Fuel System:

Red Line 'SI-1' Fuel System Cleaner. 1 bottle in petrol tank every 10,000 kms. @ 1 Bottles

Edited by reNEGaDe88

what i have been told is that although the shockproof oil makes your old gearbox good again it is not designed to make it last in other words it will fix all that crappy things happening but it WILL wear quicker and give up quicker than if you were not running it . so if efficiency is your aim then yes use it if durability is your aim then it is not recommended take notice or not i dont care i run heavy weight in my box i would not run light or super light personally and i dont care how long my box lasts as long as it is working at 110 %

Yeh, I want new oil for my gearbox to feel a lil bit better and last long. So I would need something like Redline MT-90 which lasts for 80,000km, unlike lightweightshock proof which lasts 10,000km, and box wears faster.

Cheers

unlike lightweightshock proof which lasts 10,000km

Where did you get that info?

FWIW the standard interval is 100,000 and that's for mineral oil. Synthetics should be more like 300,000.

What a load of crap. I put redline shockproof in about 3 years ago. About 1.5 years ago we changed my clutch and took the fluid out, it looked brand new so we decided to reuse it. I've had the same lightweight shockproof in there for about 30,000km and it still feals like a new tight box.

Nissan recomend you change your gearbox oil every 80,000km. I read that the Redline Lightweight shockproof oil is for race cars with dog box's etc. So it made to give max performance not necessarily max duration. So it only last 20,000km before the compounds of oil break down...

Nissan recomend you change your gearbox oil every 80,000km. I read that the Redline Lightweight shockproof oil is for race cars with dog box's etc. So it made to give max performance not necessarily max duration. So it only last 20,000km before the compounds of oil break down...

Hate to disagree with again on a different thread but thats incorrect

I have a bottle of redline oil (light shockproof) which i used on my gear box. It says on the bottle that the oil is good for up to 400 000kms.

Ill upload a pic when i find one on my pc.

EDIT:

Found the pic... You will probably need to zoom in on the sticker that has been circled in blue (Save picture as then use windows picture view to zoom in). The bottle is at my workshop. Next time im there ill snap a better pic. But this will have to do for now.

Or alternatively, go to this link.. is a bit easier to see

http://i292.photobucket.com/albums/mm33/br...n79/redline.jpg

redline.jpg

Edited by br3ndan

I used redline lightweight in an RB20 box that ran no oil in it for a month.. i bought the car, it whined like a bitch, thought it was almost dead, thought id have a look in their and not a drop of oil came out. so i filled it up with the lightweight and it's good as, been good for 6months now and i thrash it hard.

Yeh, I want new oil for my gearbox to feel a lil bit better and last long. So I would need something like Redline MT-90 which lasts for 80,000km, unlike lightweightshock proof which lasts 10,000km, and box wears faster.

Cheers

I'd recommend something other than Redline MT-90, when discussing with someone else who regularly uses Redline he recommended Redline MTL, MT-90 is quite thin.

Note: I'm talking about R32/R33 boxes, not R34....

It doesn't work well for my series 3 R33 GTR box (its 10 years old so maybe its worn synchros), so I'm trying Castrol Syntrans 75w85 next

sorry for double post. But I found this on redline tech sheet

CORROSION PROTECTION

The extreme pressure chemistry used in many gear oils

can be corrosive to brass and bronze used in synchronizers

and bushings. Most gear oils are corrosive at

temperatures of 200°F. Red Line Gear Oils are non-corrosive

up to 300°F and the MTL® in excess of 375°F. A

corrosive gear oil can shorten synchronizer life by half

and can also contribute to rust problems.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I am getting the same issue. Did you resolve it? I just got it after installing my new super coppermix and literally the same issue, new fork, new 18mm carrier, release bearing that came with the kit and replicated the exact same sound. 
    • If you like - I have the STL files so I can email em. There's a couple of gotchas (i.e the holes are not threaded so you might need/will need) to utilize some M3 melt-in threads for some of the points. However if you want to be super accurate, and are willing to remove your calipers and your SHOCKS it's a really good tool. You also might need to scale the part that measures the tyre width a bit wider. It defaults to a 7.5in tyre and I mean who is running that. Luckily with the magic of CAD this is very easy to rescale.
    • jeebus. glad you weren't under it while performing the stunt. Also thanks for the link to the wheel measurer, exactly what I needed
    • In the older stuff there were very significant differences 2wd to 4wd, for example Stagea had strut front end for 2wd and double wishbone for 4wd so it was not minor to swap. From poking around the 2wd v37, it *looks* like it might be more possible; some of the parts specifically have "2wd" stamped on them which suggests the platforms are more similar. You'd still want to start with a 4wd half cut to swap stuff from though. I'd suggest if you don't have a tune on the ECU you don't really need one on the trans either. Throttle mapping is in the ECU side (and you can always use a Roar Pedal if you want the throttle to actually respond to your foot), and really if you are happy with the stock power you probably accept the stock trans behaviour too....its all made to be "sporty" not racey.
    • So, updates. I have not washed the car since it came back from Tassie. I've driven it around a bit but not got around to actually sorting it out. I DID raise it because I cracked the rear bar leaving a hotel which was very distressing. Interestingly, the car drives more compliant now that it's raised a fair bit (5mm front, 15mm rear). Also noticed that my FR height was 10mm lower than FL. So that's now sorted out, too. I also bought this and had it printed: https://www.etsy.com/au/listing/1576422240/wheel-and-tire-fitment-tool-universal?ref=shop_home_feat_1&dd=1&logging_key=08f604d9fa4cc383550ba985e6ac85cd5cac7fbb%3A1576422240 Now, if I was smart I would have taken my brake calipers off to actually use this correctly but it was evident enough to me that in the region where the caliper was... there was nothing to hit suspension/guard/arm wise. So I'm going with "it'll be fine" after using the tool to hopefully very precisely measure the wheel clearance. Also while doing this, I had the very VERY bad idea of jacking one of the wheels/suspension arms up while the rest of the car was on jack stands. I did this to see how the arm would travel. This all was well and good until the car slid off the stands and went through a fence. So don't do that. Incredibly nobody was hurt and there was only minor damage to the rear bumper as the car didn't have far to slide, and had 3-4 wheels on it. The only damage turned out to be the fence itself which was easy to fix, and a little bit of damage to the fibreglass rear bumper trim. I had already planned to try a touch up paint kit to fix the time I drove into my garage door to see if it'd help in the interim before I get it fixed properly. I used the Dr Colorchip kit after looking online and seeing everyone talking about it. Yes it's made for chips and not huge broken missing pieces and I'll be 500% recommending it for stone chips after using it for stupid things like me. This took about ... 10 minutes and looking at the half assed photo the 30 second job I did on the bumper corner was almost perfect just by using the tiny little brush and painting it in. The sealact stuff to remove over-painting is really useful, so if/when I do it again I'll likely slather the touch up paint well over it and then clean it up with the cleaning solution. The wheels should arrive in a couple of weeks. I am still kinda confident after doing a stupid amount of measuring (and borrowing a set of 18x10.5+15) that they will not fit because I overlooked something, somehow and flew too close to the sun. ALSO R34 GTR guard liners do not fit on a GTT. I bought the undertray brake duct guides and had the wonderful problem of them not fitting my intake, my oil cooler and the liners themselves were even worse. Attempting to fit them won't work in general - You would have to cut them up as another poster mentioned as the bodywork is different on the GTT. At least I can try to resell them. So instead of cutting those up, I cut up my old already-cut-up GTT liners and extended them by using some PP plastic and drilling some 8mm holes for some nissan clips for the 'extra' bit. Because I was happy to cut them I was able to mount them pretty damn forward so I now have some semblance of guard liners, and the brake vents seal the bumper from the bottom. It sort-of-looks like this, to give some idea - If you look at the GTR and then the GTT this is when I realised that I needed to seriously measure as the inside of the rim area is entirely, entirely, entirely different and could not take any internet measurements for granted.   
×
×
  • Create New...