Jump to content
SAU Community

Recommended Posts

I want to change my gearbox oil and diff oil. I know that Redline is one of the best oils for a car's gearbox. Helps synchro's work better.

BUT. I remember hearing/reading that the lightwieght shockproof gear oil is corrosive for the gearbox.

On the website it says:

A unique gear oil designed to lubricate racing transmissions and transaxles which see serious loads (not recommended for most syncro-type transmissions).
.

Does that mean it will corrode your gearbox. I also hear it only lasts for 10,000kms. Not 80,000 like normal gear oils.

And will that corrode the LSD of my R32, with a RB25DET engine and box.

So I was wondering if I shoudl just get Redline superlight shock proof oil. Or Royal purple maxgear.

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/267969-gearbox-redline-oil-vs-royal-purple/
Share on other sites

I have only had good experiences with Redline Shockproof oils in my R33 GTS-T.

I run Shockproof Heavy in the diff and it has tightened up the diff quite nicely. I also tried it in the diff of my R33 GTR but it tightened the diff up too much to the point where it was becoming more of a locker so I swapped it over the Motul instead.

I have used Shockpreef light in my GTS-T gearbox with no problems. It seemed to smooth out the synchros and improves gear changes. I change my drive train lubricants every 20k and they come out nice and clean. My son then reuses the shockproof light in the gesrbox of his Mazda 626 with no problems.

Redline oils are expensive and these are my experiences.

shock proof is recommended for gearboxes that are in good condition it is able to be used in syncro gearboxes but only if they are in good nick no syncs crunching and all that otherwise your box will have a much shorter life i run heavey weight shock in my rb25 box and its great smooth shifts and engages great recommended it but be prepared to choke at the price

My memory is opposite: MT90 for good condition transmissions, light shockproof to help worn synchros work better (so postpones the inevitable gearbox rebuild). Ring Redline for confirmation.

I emailed them. I hear the distributor is in Ozy Park, So I will call them.

Yeh, pretty sure shockproof is only for race use and worn box's. Not good condition ones. Its either too slippery or just corrosive

^^^i was also under the impression to use it on race cars or worn boxes.

was thinking about putting it into my rb25 box but am a bit undecided if i should use this or use castrol vmx80 with nulon additive.

my gearbox crunches 2nd unless i shift at quite low revs :)

^^^i was also under the impression to use it on race cars or worn boxes.

was thinking about putting it into my rb25 box but am a bit undecided if i should use this or use castrol vmx80 with nulon additive.

my gearbox crunches 2nd unless i shift at quite low revs :)

Redline is a real good brand. The normal MT-90 oil they do for good condition gearbox'. Thats what I recomend

MT-90

Popular in Nissan, Toyota and Mazda manual transmissions and transaxles as well as other selected applications, this is a 75W90 GL-4 Gear Oil that’s slightly heavier than MTL. Provides excellent protection of gears and synchronizers and its balanced slipperiness provides a perfect coefficient of friction, allowing easier shifting.

--------------------------------------------------------------------------------

Car - Nissan - Skyline

All-2001 GTS & GTS-T (single turbo) (R32,R33,R34) RB25 & RB25T Eng, 2500cc, 2WD

Component Recommended Oil / Fluid

Motor:

Select your closest climate range. For -10°to25°C use '5W40' or 5°to35°C use '10W40' or 15°to50°C use '15W50'. (* Racing Only - use Race Oils) @ see handbook for Litres

Manual Gearbox:

Select your closest climate range. For -10°to25°C use 'MTL' or 5°to35°C use 'MTL' or 15°to50°C use 'Superlight Shock'. (* Advantage option for Performance / Racing use 'Lightweight Shockproof'.) @ see handbook for Litres

Rear Diff:

Red Line '75W90' Gear Oil (* Advantage Option for Racing use Red Line 75W90) @ see handbook for Litres

Power Steering:

Red Line Synthetic Power Steering Fluid (Bar Code Nos 30404 or RL182-1) @ 0.9 Litres = 1 US Quarts

Cooling System:

Use WaterWetter (Pink) to improve temperature control and reduce corrosion. 1x355ml bottle with distilled water. @ 1 Bottles

Fuel System:

Red Line 'SI-1' Fuel System Cleaner. 1 bottle in petrol tank every 10,000 kms. @ 1 Bottles

Edited by reNEGaDe88

what i have been told is that although the shockproof oil makes your old gearbox good again it is not designed to make it last in other words it will fix all that crappy things happening but it WILL wear quicker and give up quicker than if you were not running it . so if efficiency is your aim then yes use it if durability is your aim then it is not recommended take notice or not i dont care i run heavy weight in my box i would not run light or super light personally and i dont care how long my box lasts as long as it is working at 110 %

Yeh, I want new oil for my gearbox to feel a lil bit better and last long. So I would need something like Redline MT-90 which lasts for 80,000km, unlike lightweightshock proof which lasts 10,000km, and box wears faster.

Cheers

unlike lightweightshock proof which lasts 10,000km

Where did you get that info?

FWIW the standard interval is 100,000 and that's for mineral oil. Synthetics should be more like 300,000.

What a load of crap. I put redline shockproof in about 3 years ago. About 1.5 years ago we changed my clutch and took the fluid out, it looked brand new so we decided to reuse it. I've had the same lightweight shockproof in there for about 30,000km and it still feals like a new tight box.

Nissan recomend you change your gearbox oil every 80,000km. I read that the Redline Lightweight shockproof oil is for race cars with dog box's etc. So it made to give max performance not necessarily max duration. So it only last 20,000km before the compounds of oil break down...

Nissan recomend you change your gearbox oil every 80,000km. I read that the Redline Lightweight shockproof oil is for race cars with dog box's etc. So it made to give max performance not necessarily max duration. So it only last 20,000km before the compounds of oil break down...

Hate to disagree with again on a different thread but thats incorrect

I have a bottle of redline oil (light shockproof) which i used on my gear box. It says on the bottle that the oil is good for up to 400 000kms.

Ill upload a pic when i find one on my pc.

EDIT:

Found the pic... You will probably need to zoom in on the sticker that has been circled in blue (Save picture as then use windows picture view to zoom in). The bottle is at my workshop. Next time im there ill snap a better pic. But this will have to do for now.

Or alternatively, go to this link.. is a bit easier to see

http://i292.photobucket.com/albums/mm33/br...n79/redline.jpg

redline.jpg

Edited by br3ndan

I used redline lightweight in an RB20 box that ran no oil in it for a month.. i bought the car, it whined like a bitch, thought it was almost dead, thought id have a look in their and not a drop of oil came out. so i filled it up with the lightweight and it's good as, been good for 6months now and i thrash it hard.

Yeh, I want new oil for my gearbox to feel a lil bit better and last long. So I would need something like Redline MT-90 which lasts for 80,000km, unlike lightweightshock proof which lasts 10,000km, and box wears faster.

Cheers

I'd recommend something other than Redline MT-90, when discussing with someone else who regularly uses Redline he recommended Redline MTL, MT-90 is quite thin.

Note: I'm talking about R32/R33 boxes, not R34....

It doesn't work well for my series 3 R33 GTR box (its 10 years old so maybe its worn synchros), so I'm trying Castrol Syntrans 75w85 next

sorry for double post. But I found this on redline tech sheet

CORROSION PROTECTION

The extreme pressure chemistry used in many gear oils

can be corrosive to brass and bronze used in synchronizers

and bushings. Most gear oils are corrosive at

temperatures of 200°F. Red Line Gear Oils are non-corrosive

up to 300°F and the MTL® in excess of 375°F. A

corrosive gear oil can shorten synchronizer life by half

and can also contribute to rust problems.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm looking for some real world experiences/feed back from anyone who has personally ran a EFR7670 with a 1.05 exhaust housing or a .83 I'm leaning towards the .83 because its a street car used mostly for spirited driving in the canyons roads. I"m not looking for big numbers on paper. I want a responsive powerband that will be very linear to 8000 rpm. I dont mind if power remains somewhat flat but dont want power to drop off on top. The turbo I've purchased is a 1.05, although the mounting flange T3 vs T4 and internal vs external waste gates are different on both housings, I not concern about swapping parts or making fabrication mods to get what I want. Based on some of the research I've done with chat gpt, the 1.05 housing seems to be the way to go with slightly more lag and future proofing for more mods but recommends .83 for best response/street car setup. AI doesn't have the same emotions as real people driving a GTR so I think you guys will be able to give me better feed back 😀   
    • Surely somebody has one in VIC. Have you asked at any shops?  Is this the yearly inspection or did you get a canary?
    • This is where I share pain with you, @Duncan. The move to change so many cooling system pieces to plastic is a killer! Plastic end tanks and a few plastic hose flanges on my car's fail after so little time.  Curious about the need for a bigger rad, is that just for long sessions in the summer or because the car generally needs more cooling?
    • So, that is it! It is a pretty expensive process with the ATF costing 50-100 per 5 litres, and a mechanic will probably charge plenty because they don't want to do it. Still, considering how dirty my fluid was at 120,000klm I think it would be worth doing more like every 80,000 to keep the trans happy, they are very expensive to replace. The job is not that hard if you have the specialist tools so you can save a bit of money and do it yourself!
    • OK, onto filling. So I don't really have any pics, but will describe the process as best I can. The USDM workshop manual also covers it from TM-285 onwards. First, make sure the drain plug (17mm) is snug. Not too tight yet because it is coming off again. Note it does have a copper washer that you could replace or anneal (heat up with a blow torch) to seal nicely. Remove the fill plug, which has an inhex (I think it was 6mm but didn't check). Then, screw in the fill fitting, making sure it has a suitable o-ring (mine came without but I think it is meant to be supplied). It is important that you only screw it in hand tight. I didn't get a good pic of it, but the fill plug leads to a tube about 70mm long inside the transmission. This sets the factory level for fluid in the trans (above the join line for the pan!) and will take about 3l to fill. You then need to connect your fluid pump to the fitting via a hose, and pump in whatever amount of fluid you removed (maybe 3 litres, in my case 7 litres). If you put in more than 3l, it will spill out when you remove the fitting, so do quickly and with a drain pan underneath. Once you have pumped in the required amount of clean ATF, you start the engine and run it for 3 minutes to let the fluid circulate. Don't run it longer and if possible check the fluid temp is under 40oC (Ecutek shows Auto Trans Fluid temp now, or you could use an infrared temp gun on the bottom of the pan). The manual stresses the bit about fluid temperature because it expands when hot an might result in an underfil. So from here, the factory manual says to do the "spill and fill" again, and I did. That is, put an oil pan under the drain plug and undo it with a 17mm spanner, then watch your expensive fluid fall back out again, you should get about 3 litres.  Then, put the drain plug back in, pump 3 litres back in through the fill plug with the fitting and pump, disconnect the fill fitting and replace the fill plug, start the car and run for another 3 minutes (making sure the temp is still under 40oC). The manual then asks for a 3rd "spill and fill" just like above. I also did that and so had put 13l in by now.  This time they want you to keep the engine running and run the transmission through R and D (I hope the wheels are still off the ground!) for a while, and allow the trans temp to get to 40oC, then engine off. Finally, back under the car and undo the fill plug to let the overfill drain out; it will stop running when fluid is at the top of the levelling tube. According to the factory, that is job done! Post that, I reconnected the fill fitting and pumped in an extra 0.5l. AMS says 1.5l overfill is safe, but I started with less to see how it goes, I will add another 1.0 litres later if I'm still not happy with the hot shifts.
×
×
  • Create New...