Jump to content
SAU Community

Labour Costs.

SmoothLine

By SmoothLine,
in Victoria

 Share

Recommended Posts

Guest INASNT

Guest INASNT

Posted
Posted

I know a few of you have had similar work done to your cars, need some approximate labour costs for the following work.

-Cooler + Piping Fitting

HARD TO SAY AS IT DEPENDS HOW MUCH OF METAL NEED TO BE CUT FROM THE FRONT BAR.

-AVCR Install

A BRAINEACK LIKE YOUR SELF COULD INSTALL THIS YOURSELF. TUNE WILL TAKE ABOUT 1HR MAX WITH STOCK TURBO

-POWER FC Install + Tune.

PFC AGAIN A BRAINEACK LIKE YOURSELF CAN INSTALL THIS YOURSELF, AS IT TAKE ABOUT 5 MINS. TUNE WILL TAKE ABOUT 1HR WITH STOCK STUFF.

-A/M Turbo Install (straight fit)

2-3 HRS IF U NEED TO MAKE A NEW DUMP PIPE ETC

Just some approx prices would be excellent.

MOST OF THE $$ DEPENDS ON WHO AND HOW WELL YOU KNOW THE PERSON DOING THE JOB.

Thatnks Guys... [/b]

Link to comment
https://www.sau.com.au/forums/topic/26849-labour-costs/#findComment-566905
Share on other sites
predator Grand Master

predator

Posted
Posted

but he's in QLD..

matt - i think its time you got your hands dirty..

HARD TO SAY AS IT DEPENDS HOW MUCH OF METAL NEED TO BE CUT FROM THE FRONT BAR.

Also depends on your front bar.. and what piping kit you get, and what intercooler you get, and whether your support bar is cut already. My HKS kit just fits on with the 400R bar and my old GTR bar, no need to cut. Angle grinders are cheap though :D

dj_l3thal installed his trust kit the other week.. his car is still running ;)

Link to comment
https://www.sau.com.au/forums/topic/26849-labour-costs/#findComment-566975
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      new 1.5 LSD issues/concerns

      By GTSBoy · Posted

      A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • JC71
      new 1.5 LSD issues/concerns

      By JC71 · Posted

      the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
    • TurboTapin
      Most women will agree that parking is the most taxing part of driving

      By TurboTapin · Posted

      What a time to be alive!!
×
×
  • Create New...