Jump to content
SAU Community

Recommended Posts

Nissan Skyline R33 Series 2, Melbourne

Handling/Performance

TIEN superstreet coilovers (less than 2000k’s)

Whiteline front and rear sway bars

Front Strut brace (off a Stagea)

TOMEI short shifter

HYBRID Front mount

Custom Turbo-back exhaust

Hi flow Cat

Twin 4” muffler

HKS EVC (electronic dual stage boost controller)

RDA slotted Front rotors

Ferodo DS2500 pads all round

Apexi Power FC w/ HC

Exterior

Full respray in Cubanite silver (Mercedes Champaign)

Custom evo vent moulded into bonnet (actually serves a prupose, cold air straight to the pod)

Pod is contained in an aluminium box

Full explosive body kit

Nismo clear side indicators

20” Pegasus rims with Nankang tyres

Interior

GTR front seats

Seats and parcel shelf re-trimmed in black

Custom Dash surround (black with gold pearl)

Blitz boost gauge

HKS turbo timer

Sound

Alpine head unit (one of the new ones)

Focal Splits at the front

JL audio 4channel running speakers

2 x 12” Kicker comp subs

Kicker mono-block running the subs

Made 199.5rwkw with the Power FC at RE customs Dyno

All tuning done at RE Customs

Serviced every 5000kms or less with Motul Turbolite

$19 500 NEGOTIABLE

Price is negotiable, can also remove a few things such as computer, system or rims.

Owned this car since 2003. First owner in Australia, imported myself.

Bought it stock standard and have built it up over the past 5+ years

Reason for sale: I never thought I'd sell this, but it's just time to move onto something else

Contact:

PM or sms: 0433 117 369

pics coming in a few minutes...

Edited by LiQuid IcE
Link to comment
https://www.sau.com.au/forums/topic/268524-for-sale-gold-r33-s2-1997/
Share on other sites

Dyam... That truly has to be one of the finest 33's I've seen in awhile.

Thing has got sex appeal HARDDD!

I think this is one of the few R33's going around Melb that actually stands out form the crowed without looking too "riced" up.

Good luck with the sale man. :P

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...