Jump to content
SAU Community

Recommended Posts

As we all probably know by now, those of us who have installed head units,

the r30 is a horrible car to fit a stereo to. The deck does not quite fit all the way in

and once the old one is removed there is a wide open gap that has to be filled with

something so there is no big gaps.

What have you done to overcome this, and has anyone got any different ideas

or a different location for a head unit?

Link to comment
https://www.sau.com.au/forums/topic/268540-head-units-in-the-old-r30/
Share on other sites

I'm using an OLD SCHOOL retro look POST mount radio cassette in a poverty pack centre panel & a 1/4 DIN equalizer in the ashtray and an FM modulated 10 stacker in the boot.

Looks a bit original and nobody is gunna want to steal my radio cassette eh?

The hole to the left is going to have a plastic pocket from an N12 pulsar or a gauge or 2.

Cheers, D

this is a neat setup, does give the thieves a good look at it though

Here is my setup. It is offset to the right. Easier to reach the controls.

2019157250041313032isLALx_th.jpg

I also have redone the boot with a shallow mount sub on one side and the amp on the back of the seat.

2322450670041313032ihkepc_th.jpg

Im not a fan of the glovebox job.

I think its good for classics that are worth 50k plus or for people that dont like using their stereos heaps.

Its not practical enough, just to turn the volume up or down or select another track.

Here is my setup. It is offset to the right. Easier to reach the controls.

2019157250041313032isLALx_th.jpg

I also have redone the boot with a shallow mount sub on one side and the amp on the back of the seat.

2322450670041313032ihkepc_th.jpg

I thought of offsetting it, i should of gone with it.

whats that sub like?

I need to get me one of them steering wheels, or perhaps a whole black dash!

so you drive around with the glove box open? or you get one of them

thumb controller thingys?

Had a similar setup once before and the unit came with a little hand held unit that controlled enough functions.

Glovebox could stay closed. I don't fiddle with the radio anyway usually...just have it on a station and leave it.

i removed my antenna from the roof when i painted the car, so i got no radio.

i keep wanting to go buy an electric in car one but i dont really like the radio anyway.

i just got a new deck with a usb input so it works like a giant ipod,

so i need to see the face so i can read the folder names.

hence the glovebox is not a good spot for my needs.

Ravenoak... Your's looks great... Is it just me or is your clock and climate settings different???

My car already had a deck installed when i got it and sits in the middle like Andrew's.. but mine doesnt sit in flush :P

I have seen some photos somewhere before where someone has offset the cd deck and had an aftermarket EQ to the right, thats always an idea for you Nick.

the decks dont fit flush coz there is no depth in the cavity for a standard size deck!

Ive fitted mine already in the center. i installed a volt guage and battery light to the left of it.

Made up an MDF panel to cover all the gaps.

Ill take a photo and post it up.

I thought of offsetting it, i should of gone with it.

whats that sub like?

I need to get me one of them steering wheels, or perhaps a whole black dash!

The sub is great. It is a special design from Clarion to fit in shallow depths. Plenty of punch but not doof doof. Clean, crisp and tight bass.

Ravenoak... Your's looks great... Is it just me or is your clock and climate settings different???

My car already had a deck installed when i got it and sits in the middle like Andrew's.. but mine doesnt sit in flush :D

I have seen some photos somewhere before where someone has offset the cd deck and had an aftermarket EQ to the right, thats always an idea for you Nick.

The clock and climate controls are black as opposed to the silver finish. I think this was the case on some of the RS's. My old Paul Newman had the silver finish.

cheers

07052009095.jpg

light is alternator light, forgot to wire it into the dash when changing the wiring loom.

Used MDF to make the panel around the deck, gonna laminate it matt black.

Edited by skybt1
07052009095.jpg

light is alternator light, forgot to wire it into the dash when changing the wiring loom.

Used MDF to make the panel around the deck, gonna laminate it matt black.

That is where I'm going. Thanks Nick.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
×
×
  • Create New...