Jump to content
SAU Community

Recommended Posts

the car i bought was built by them.

everyone has been amazed to say the least at their work.

going there to get re-tune as it was martains old car to begin with but even untuned the car flys!

i know a few people that go there for general things and full race car setups.

but im guesing their not ones to go to if all you want is a new set of brake pads or your bov put on as they've got alot of import things to do with the 35's parts production for the USA

when Peter Hall was there he did services and engine rebuilds (built mine and done an AWESOME job), but he ain't there no more so im not sure whether they do anymore

Peter is now at JMS, GREAT guy and very friendly so maybe go there to speak to him as he has done many GTR's especially r32's, if not go speak to Simon at Morpowa

Didn't think Willal did regular services on "off the street" customer cars?

The OP was asking about getting mods done rather than a service. I went to Willall after I spun a big end bearing on my R32 GTR for the engine rebuild. Peter Hall spent a lot of time with me in formulating the parts list for the rebuild. Peter begun the work on my car but unfortunately left Willall quite suddenly and left my car in pieces with no-one to work on it. Peter recommended Steve from Manta and I had the car delivered there and the engine arrived later in lots of boxes - like a jigsaw puzzle - for Steve to put back together. Many parts were missing and Steve was required to go back to Willall on 3 separate occasions to look for these parts. All this cost me a lot of money and lengthened the time that my car was off of the road - although this seems to be a common theme with my car but that's another story.

Steve did a great job on the rebuild and I was able to get very good power levels from relatively low boost on smallish turbos with extremely low levels of knock indicated on the PFC. Steve is very pedantic, sometimes frustratingly so, but I listened to everything he said and trust his opinion more than most mechanics I've dealt with. You can see my mod list and dyno graph in the Forced Induction sticky for RB26s (page 7 post 136).

Edited by writeoff

It is true Willall do not perform a lot of general service work these days. Our production schedule and engineering requirement for our WR35 GTR parts line-up puts paid to most conventional workshop style affairs. We do however undertake customer builds in certain instances. For example over the next six months Willall will turn out a specialised drag R33 GTR (owner looking for sub 10 second times - and obviously we have done this before). We also have a Tarmac Rally R34 GTR to build, and a complete ground up on an R35 to CAMS Tarmac Modern regulations. For this work Willall are fortunate enough to have Mark Tilbrook overseeing the process. I may be biased having known Mark for 20 years, but he has 'mechanical touch' and fabrication skills that are second to none and a track record of successful cars such as the 2nd place Targa R34 for Glenney and the dominant CTS drift car. So yes, providing you have the budget and a serious and mature outlook on the expectations and realities, then Willall can indeed build the GTR for you :)

I might come to see you guys at Willall sometime soon. Wanna get the Stagea tuned and you guys are the closest to me. I know little about your shop and facilities, never been there. You guys got a AWD dyno? I would assume so, stupid question, but had to ask. Oh, and are you guys open weekends?

Any idea on a tune to a Stag with stock ecu, no ecu plug ins? Need chip. PM me to discuss if need be.

only RWD at willall easy enough to drop the front shaft and pull a fuse

Far as I know, just need to drop the front shafts. No fuse to pull like the skylines.

Got talking with some SAUers and other Stag owners last night. Trying to determine what detail makes my "Nismo" edition stagea different from the others ... found quite a few differences. Better list them. :)

Hi ChristianC

pleased to tell you Brady has returned to work with us here at Japanese Motorsport

heading up our workshop unlike others were more than happy to undertake any work from minor jobs, servicing to full ground up GTR builds

as most would know Brady did his training under Mark while at Tilbrooks during the glory years

his work ethic and drive to exceed customers expectations set's him apart from most mechanic's Ive meet

feel free to contact us on 08 8363 5555 if you have questions

Edited by 1400r

1400r, not sure if you've recently registered as an SAU Trader but you must do so if you plan on advertising your business on these boards.

Failure to do so will see your posts deleted and an officicial warning attached to your existing one.

If you have just done so, then welcome and please ignore this post.

"1400r, not sure if you've recently registered as an SAU Trader but you must do so if you plan on advertising your business on these boards.

Failure to do so will see your posts deleted and an officicial warning attached to your existing one.

If you have just done so, then welcome and please ignore this post."

np Sled as always Ben's keen on joining SAU as soon as we can figure out how to

would be great if a SAU mod like yourself could pop in to discuss joining up

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for all the replies fellas. Gonna finish putting it back together and see how it handles the set up. If it starts pinging it’ll be parked.
    • Well, I can recommend the partial AV system translation CD I ordered from Car Audio Workshop in NZ. Whilst it didn't address the date issue, it has conveniently translated on-screen menu items into English, and now allows the GPS-received time to be offset in hours rather than minutes, so I can display Eastern Australian time accurately ( and bump it by another hour when daylight savings starts ).
    • Yuh, if it's 45°C outside, my car is driving in it.
    • I'd be curious to hear more. Otherwise, have you driven a modern x-trail? I wonder how it compares. Here in Australia they are/were popular for rentals and fleet vehicles. I have been in some and my impression was they are bad. But, this may have been very different in the 2000s at a good trim level. Twenty years is plenty of time to make the model worse. I do very much agree with the 2 silver cars in the garage approach. But, not driving because it's too hot would not leave a lot of time in the year for many Australians. I don't think you need to worry too much unless the car has actual issues with overheating. 
    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
×
×
  • Create New...