Jump to content
SAU Community

Recommended Posts

Hi, I bought a sony ericsson K850i off a forum member in perth and I had it for about 2 months, worked perfect then for some unknown reason 1 day it was sitting on the table and it wouldnt turn on. No idea why. Does anyone know how to fix them and is willing to do a cashie? Obviously don't want to spend hundreds to fix it... Cheers, James.

Edited by Ten Four
Link to comment
https://www.sau.com.au/forums/topic/269361-phone-repairs-anyone-know-anyone/
Share on other sites

Take it to a place in the city called Fone Ezy, its in the Picadilly Arcade and the guy there can fix pretty much anything. Prices aren't too bad, just don't look at buying a phone outright off him haha.

Edited by R34 GTTTTT


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...