Jump to content
SAU Community

Rb25det Series 1 And 2 Turbo Differences?

Stunn-R

By Stunn-R,
in Engines & Forced Induction

 Share

Recommended Posts

DRD-00F Grand Master

DRD-00F

Posted
Posted

If you have a GT2871, they're all worse then that...

If I remember correctly, the series 2 turbo had a front wheel made out of some sort of polypropolene that made it lighter and spool faster, but I could be wrong...

Either way, they're both pretty shit... Brittle exhaust wheels and tiny housings...

Turbz RB-25 Experienced

Turbz RB-25

Posted
Posted
i did search and couldnt really find anything worthwhile, but i searched a while ago and i think i read the series II is a little biggER?

Nope, not bigger.

Made of different properties. S2 turbo can be boosted a little more as the material the compressor wheel is made of is lighter and a bit stonger.

Other than that, same shit, different smell.

paulr33 Grand Master

paulr33

Posted
Posted

assumption city

they are basically the same, the s2 cant handle more boost

anything around 12 or higher will kill the turbine, or put it at risk

running 12psi or higher, you are basically saying, i accept if the turbo fails and have $ to replace it

this is same for R33 series 1 or 2

the s2 has a different compressor wheel, but its far from stronger

DRD-00F Grand Master

DRD-00F

Posted
Posted
assumption city

they are basically the same, the s2 cant handle more boost

anything around 12 or higher will kill the turbine, or put it at risk

running 12psi or higher, you are basically saying, i accept if the turbo fails and have $ to replace it

this is same for R33 series 1 or 2

the s2 has a different compressor wheel, but its far from stronger

Soooo what's different about it?

Turbz RB-25 Experienced

Turbz RB-25

Posted
Posted
assumption city

they are basically the same, the s2 cant handle more boost

anything around 12 or higher will kill the turbine, or put it at risk

running 12psi or higher, you are basically saying, i accept if the turbo fails and have $ to replace it

this is same for R33 series 1 or 2

the s2 has a different compressor wheel, but its far from stronger

It's stonger. Search, and you shall find as well.

bubba Grand Master

bubba

Posted
Posted

No, it's not.

Personal experience.

RB25s2 is not stronger than s1. The nylon compressor wheel like to delaminate when leant on too hard.. had one in the workshop not so long ago with lots of bits of nylon missing of the wheel.

I recently sold my RB25s1 turbo, that thing spent a year getting abused at 12psi on my RB20 and another year getting abused at 12psi on my RB30 while also being a restriction, which meant the exhaust housing was getting super hot and the exhaust wheel still didn't fail.

RB25 Neo turbos have a slightly bigger exhaust housing.

I think it's pretty much luck of the draw, boost it over stock and it can fail sooner than if you didn't boost it.

That being said, I still prefer RB25s1 turbos and will advocate them over the later nylon wheeled units.

DRD-00F Grand Master

DRD-00F

Posted
Posted

I'd have to agree with the Series 1 turbos being stronger, but would also say the series 2 spool up faster. But when standard we're only talking like 100rpm or something anyway, it's pretty much instant!

bubba Grand Master

bubba

Posted
Posted

Umm.. Series 1 turbo has a STEEL compressor wheel while Series 2 has a NYLON compressor wheel. BOTH TURBOS HAVE CERAMIC EXHAUST WHEELS.

Oh and doof, of course the nylon wheeled turbo spools up marginally faster.. that was the whole point of the lighter compressor wheel :D

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • WMDC35
      Wheel Sizes & Offsets For Skylines

      By WMDC35 · Posted

      A bit late but A disk S13P fit over stock R32 GTR brakes, usually A disk front, O disk rear works.
    • Duncan
      RB20DE NEO smallbox clutch.

      By Duncan · Posted

      Or, the height of the release bearing is not correct for your combo. Start with the bleeding and checking the slave moves throughout its range when you press the pedal (2 person required), but it is possible for the height to be internally wrong too (box back off to measure.
    • GTSBoy
      RB20DE NEO smallbox clutch.

      By GTSBoy · Posted

      Yes, there's quite a few things that can go wrong during a clutch install. Very unlikely. I have a similar clutch. They (ACS) make good gear. No, it is not normal. It is possible that you just need to bleed the clutch slave. But the new clutch will also have a more aggressive actuation force/pressure, and so your old slave cylinder might be a bit leaky or otherwise compromised, and not up to the extra force required. Or the master cylinder, same.
    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
×
×
  • Create New...