Jump to content
SAU Community

Recommended Posts

Turbo is by far the easier, simpler, better option.

but by all means, nothing wrong with a RB30DER :P

It'd also help if you at least had a power goal and budget in mind.

there are a few ways you can go about doing this.

you can either turbo your current N/A engine, but the power figures will be quite limited before you can really chase power numbers

however its a good way to get a really reponsive street car with the extra poke from a puffer bolted on the side.

high compression + small turbo = instant torque :)

OR

you can go for an RB25det transplant. with this, you can wring out 300rwkw on the (almost) standard head and internals,

and if you use the search function, there'll be plenty of old threads that you can dig up for advice as its probably the most common engine on here.

IF I WERE YOU: i'd sell the beast and buy something turbo from the factory :)

however if you can bring yourself to sell, i'd just bolt a turbo on the side.

reasons being, you'll be able to save money by getting yourself a turbo manifold etc and bolting it on without having to change gear box & drive shaft & diffs & etc etc. however, you'll need a bit of help with oil / water lines going to the turbo, but in the long run i think it'd be cheaper if you just want to feel the power and torque that turbos offer.

if you want to eventually build a serious track / drift / street car, i'd go for the transplant ;)

hope this helps dude, best of luck

Edited by EliSun
Turbo is by far the easier, simpler, better option.

but by all means, nothing wrong with a RB30DER :D

It'd also help if you at least had a power goal and budget in mind.

there are a few ways you can go about doing this.

you can either turbo your current N/A engine, but the power figures will be quite limited before you can really chase power numbers

however its a good way to get a really reponsive street car with the extra poke from a puffer bolted on the side.

high compression + small turbo = instant torque :)

OR

you can go for an RB25det transplant. with this, you can wring out 300rwkw on the (almost) standard head and internals,

and if you use the search function, there'll be plenty of old threads that you can dig up for advice as its probably the most common engine on here.

IF I WERE YOU: i'd sell the beast and buy something turbo from the factory ;)

however if you can bring yourself to sell, i'd just bolt a turbo on the side.

reasons being, you'll be able to save money by getting yourself a turbo manifold etc and bolting it on without having to change gear box & drive shaft & diffs & etc etc. however, you'll need a bit of help with oil / water lines going to the turbo, but in the long run i think it'd be cheaper if you just want to feel the power and torque that turbos offer.

if you want to eventually build a serious track / drift / street car, i'd go for the transplant :D

hope this helps dude, best of luck

thank you very much you have given me some excelent info, i went looking and found a 1988 two door coupe 5speed manual t.i skyline with turbo, nice price just dota go for a bank loan lol, how much do you think i would get for my beast.... it is a sweet ride for a standard..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
    • This coupled with 6-9 speed autos with ridiculously short gearing is why these modern shitbox cars always seem so fast off the line. If it wasn't for those things, Raptors would not seem fast. The problem we have is there is a driveability gap between a more gentle take off and a wheelspinning sideways launch. The difference between ankle flex required to achieve one and ankle flex required to achieve the other is about 0.5°.
    • Yeah I think I'm also with the opposite here. It's 'hard to keep up with traffic' because in the real world I'm accelerating with 15% throttle and they are pinning it. It feels like I'm being an overt dickhead at anything above 15% throttle, so the car sounds like I'm being an overt dickhead to keep up with/get ahead of traffic when I'm really just trying to drive with traffic. There would be no issue 'keeping up with traffic' if we used the same level of throttle input/aggression to drive around. People really do just drive around with their foot nearly pinned in econoboxes.
    • To be fair it's the other way around. 300kw is boring in a modern Golf or BMW. They are so competent / well-engineered / devoid of emotion that you have to go stupid fast to feel anything. Whereas the <300kw RB still makes all the right noises and it feels good to drive. Can pull off at the lights with the turbo whooshing and the blow-off pssshing and feel like the coolest kid on the block. Just don't look to the side where you'll see the bored housewifes in their shitbox Yaris/Corolla/Camry that kept up because you didn't go fast at all
    • 300kW is so boring in a Skyline, you'll get spanked by someone's mum's Golf with Alibaba pipes, and an email tune.
×
×
  • Create New...