Eoi: Azcustom Fuel Surge & Oil Catch Tanks - Interest?

[tas_180]

Hi all,

this thread is to gauge interest from people who would be interested in upgrading their fuel and oil catch tanks to custom items fabricated by Aaron at AzCustom Performance Fabrication. Since installing the custom fuel surge tank situated within the spare wheel well in our own SP Garage Nissan 180sx we have received an amazing amount of positive feedback and this has led to Aaron considering manufacturing a small to medium sized batch of the same style of surge tank with fittings to suit peoples requirements (any type of fitting can be welded on). These surge tanks are CAMS approved when sealed correctly using 6mm perspex etc (see CAMS manual for further information regarding external fuel setups). Pics of the surge tank design can be viewed below:

Aaron is also looking at fabricating oil catch cans to suit in particular S chassis vehicles, however the design of the cans (situated where the standard battery position is located) should allow the cans to be used in most makes and vehicle models. These cans will be CAMS approved and be a minimum of 2L in size (will probably be approximately 2.5L). The cans will vent to atmosphere via a small air filter and also be available in any fitting type available to suit various applications. Pics of the catch cans to come shortly.

Prices will be between $200-$300 for both items to provide a rough ball park figure.

Please express your interest in this thread.

Cheers.

Ben