Jump to content
SAU Community

Recommended Posts

hey guys

sori these questions probably come up heaps

just wanna know if someone can point me in the right direction

i want to know any differnces between the rb30 and rb25 series one turbo's

my rb25 turbo just died and i need to replace it

also supposedly there is a high flow for sale, i've been given some specs but i am still a bit dodge

http://www.boostcruising.com/forums/index....t&id=762341

http://www.boostcruising.com/forums/index....t&id=762338

those are some pics of it

it looks to be a rb30 t3,

i was given:

standard inlet is .48, its been highflowed to .56 or .58

and the rear is .63

does this make much sense to you guys?

what are the standard specifications of rb25 t3's and rb30 t3's?

cheers

Dan there is plenty already available here.

I searched RB30 turbo under Forced Induction, and in 5 seconds this thread was found:

http://www.skylinesaustralia.com/forums/Vl...p;hl=rb30+turbo

Otherwise, a "highflow" does not affect the A/R of a housing. Nissan did not advertise the specifications of the RB25 series turbocharger, but search and you will find pictures and the sizes of the impellers. I know because I posted them up over 2 years ago :P

The RB30 series turbo is not even slightly similar to the RB25. Check the link to the above thread.

If you're not sure of the specifications of a turbo being advertised, ask who performed work on the thing, and contact that company directly.

cheers

This bolt pattern won't fit your stock setup. The dump pipe pattern is different. You can send in your stock turbo for high flow. We can make it flow 230rwkws with your stock housings.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Mixing things up - installed some leather recaros to match the leather seat covered rear seats. Interior looks pretty schmick now except for some slight wear on the steering wheel which I will monitor and address if it becomes worse or actually noticeable!  
    • Didnt realise RB's had more then 1 head.
    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
×
×
  • Create New...