Jump to content
SAU Community

Recommended Posts

Shouldn't be to hard a car to build, its been done plenty of times before, I've got a mate putting a SR in his ceffy. keen to see it in action.

Do you own the Hilux with TONKA on the plates?

the problem with using gtr shell tho is that u cant use the sr cross member

an yeh tonka is my other money pit

actually if he chucks in the RWD front cradle and does away with transfer case it will weigh less than a standard R32 RWD car

GTR's are only heavier due to transfer case and extra front shafts CV joints and all the bits and pieces to make em AWD

Finally someone with brains has posted!!

Weight will be distributed nicely with a SR, and have no problems with the power, You should see if TT have got or can get hold of some corner weights Dan, that way fuel pumps, battery and so fourth can be mounted keeping the weight distribution in mind.

Anyways mate, thinking outside the square.....I like it!! :P

interesting choice dan.

looking for a toy too now that i've sold the skyline but not looking to spend as much as u, only about 5k max.

Think either an s13 to do motorkhana's and hill climbs or trying to find a stock datsun 1200, leaning towards the s13 as i can probably have more fun in that and the 1200 has so far been very hard to find.

yeh dan like I said to ya when u rang me n told me when ya got the gtr shell n told me what the go was...

think its wayyyyyyyyyy left field!!!!!! and might even possible work haha

that aside ill still call you a fag for using the SR for now haha!!

but should be alright buddy when it all done :P

as long as you put some tuff jap rims that have fitment on them :(

cant wait to get out to a hillclimb buddy n we do some runs :devil:

-Benji

Edited by Benji

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That looks good, but I think you're going to need much beefier side skirts now.
    • They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • Define "starting to fail". Wy not just rebuild them?
    • Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...