Jump to content
SAU Community

Recommended Posts

hey guys,

mobile speed cameras...anyone know how far away they can get you and whether they flash at night or not???

i remember it came in in convo on friday with mates and yeah jsut wondering if anyone knew for sure....

and also whats the rule for being placed visually...do they have to be under street lights etc???

gus

Link to comment
https://www.sau.com.au/forums/topic/270475-speed-cameras/
Share on other sites

i saw lots of them in belconnen way. in the middle of the street and they placed them in a very tricky way. we cant see it over than 50 meters or until we're on top of the road's slope. once i went 90's and there was no flash (my mate behind me). hope it helps.

Link to comment
https://www.sau.com.au/forums/topic/270475-speed-cameras/#findComment-4600387
Share on other sites

Effective range is limited to ensure accruate reading, in perfect conditions over 1km is possible. They do not need to flash. Unless on a special funds grab they are set to 10% of actual speed (not what your speedo says). ie 88 in an 80 zone your gone.

The above is based upon conversations with speedcamera operations, friends that have been booked ect.

Link to comment
https://www.sau.com.au/forums/topic/270475-speed-cameras/#findComment-4600466
Share on other sites

Also they dont use radar, they use the same guns as police... they have to land a laser beam on your car first to get a reading...

theres also a thing called the "cos" factor, It derives from pythagoris theroem... one of the guys who works in them told me that for every 1m they are beside you... (1m off the road) it makes for a 20m difference to the car... NOT 20km/hr, but 20m, the camera then has to then do the math with that difference so you end up with a lower speed overall if the camera is further to the side.

(ie if its sitting off to the right of a 2 lane road you could probably go through in the left lane doing 20% over... they give you 10% and depending where it is sitting the "cos" factor will knock you speed down some more...

also the fixxed cameras using RADAR, you can tell they use radar because there are no loops cut into the road beside it.

They CANNOT take a picture if there is 2 cars in the beam, I have done a little work on these and we were testing the one on hume highway (southbound), everytime 2 cars went across its radar beam it read "ILL" instead of their speed...

Link to comment
https://www.sau.com.au/forums/topic/270475-speed-cameras/#findComment-4600566
Share on other sites

Also its not 10%, but 10% + 1

the lowest posable ticket for an 80 road is 89... but i only know this is true for the fixxed cameras, i suspect the same for the mobile ones too

harsh too, my house mate just got a ticket for 89 on ginninderra drive lol

Link to comment
https://www.sau.com.au/forums/topic/270475-speed-cameras/#findComment-4600570
Share on other sites

because they DONT use radar they WOULD be able to distinguish between the 2 cars... so i would say they can get one of the 2 cars, depending who their pointing it on... usually the right lane, as they keep it set up between cars so they dont have to adjust it over and over again.

Link to comment
https://www.sau.com.au/forums/topic/270475-speed-cameras/#findComment-4601744
Share on other sites

I think there is two types of the mobile speed vans. One does flash, but the more modern ones have infra-red so you wont see a flash. But with infra red comes a problem that if the numberplate is too hot, it will be a blur. There is apparently a very large list of restriction using the van, ranging from visibility and humidity all the way to whether there is a tree behind you or whether a bird flys past your car. The reason for this is because they blast you with radiation sending it all over ur car so a return beam is guarenteed, unlike a single beam which would be impossible to get a return beam from. I also remember the vans take 2 photos, one of ur plate and the other of your face.

But as the fixed ones are radar, apparently a very white/bluish white coloured blub for your numberplate light will cause it to blur or haze as the light it too hot for the radar (the only radiation they can use is infra-red as anything else could cause interference)

Most of this info has come from one of those guys who you see working on them, and the rest just what i read...so dont trust any of it ><

But if I'm wrong, correct me :huh:

Link to comment
https://www.sau.com.au/forums/topic/270475-speed-cameras/#findComment-4602557
Share on other sites

We spoke to some of the guys that operate them, when they were at a car show, and he said that they can get your speed from a fair way away, but can't book you till you're very close (I can't remember the metres exactly, but it was close). His words were, you could be doing 180kms but as long as you slam on the brakes before you get close you'll be fine.

He basically said you have to be a dickhead to get done by one (ie. not paying any attention at all) cos most people keep an eye out and will spot them way before they can book you.

These are the vans I'm talking about. This was also a couple of years ago... so things may have changed.

Link to comment
https://www.sau.com.au/forums/topic/270475-speed-cameras/#findComment-4602587
Share on other sites

the fixxed speed camera "numbner plate light" is a load of sht... sorry... but they use a normal flash and a standard digital camera inside them, trust me ive seen all the files on one, each time they take 4 pics, 2 up close of the plate and 2 to get the whole car, its very rare that the fixxed ones will miss ya.

Link to comment
https://www.sau.com.au/forums/topic/270475-speed-cameras/#findComment-4602625
Share on other sites

Guys stop adding to the already ridiculous amount of rumours regarding speed vans, cameras and police etc.

I doesnt matter what colour your number plate is. If it is legal and from the shopfront it is reflective. If you have fakes then i laugh when you get pulled over for being so stupid.

With regards to the Vans. You need to be within 100m and generally around the 75m mark is where most get their picture. The van can take a clear picture of you from over 1km away however the photo and correct speed need to be taken at the same time.

If you want to know how i know...lets just say i have a lot of police in my family :P

Link to comment
https://www.sau.com.au/forums/topic/270475-speed-cameras/#findComment-4605315
Share on other sites

  • 2 weeks later...

I did some research on this after almost getting done a few years ago, so this was for when the cameras were first introduced.

The laser speed checker part of the camera's is effective to at least 500m, but in good conditions (ie. NOT through a tinted window) and with a red target car, it can get accurate speed at over 1km. But the camera itself has two lenses, a wide and a telephoto, and has an official range of 100m - but I've talked to someone who reckons they got pinged at close to 150m. And for those who think they were going too fast to be caught... the speed range was +/- 320kph. The only useful bit of info is that the auto focus used to be a bit slow, so it couldn't get a good shot if you were rapidly decelerating... like someone I may know who doing 190kph on the parkway when he saw the van and managed to slow to 90kph (courtesy of Brembo) as he passed them and didn't get done.

Link to comment
https://www.sau.com.au/forums/topic/270475-speed-cameras/#findComment-4623770
Share on other sites

  • 2 weeks later...

Cop's speed gun range depends on how steady they hold it.

My cop neighbour let me play with his hand held speed trap gun. it's easy pointing a red laser dot on an object and click.

The laser pulses at something like 1000Hz, and it calculates distance and speed of the object.

I've managed to get a distance to light pole about 70m away, pointed at my neighbour's dog doing 3km/h, 50m away. Note that

those are small objects compared to a car.

These speed guns don't have a camera that takes a photo.

Link to comment
https://www.sau.com.au/forums/topic/270475-speed-cameras/#findComment-4640352
Share on other sites

out of curiosity, whats the go with the hand held ones? do the coppers get in the car and come after you or do the camera thingys hav a photo taker? i see them all the time and it just looks like a waste of time...

Link to comment
https://www.sau.com.au/forums/topic/270475-speed-cameras/#findComment-4641685
Share on other sites

Cop's speed gun range depends on how steady they hold it.

My cop neighbour let me play with his hand held speed trap gun. it's easy pointing a red laser dot on an object and click.

The laser pulses at something like 1000Hz, and it calculates distance and speed of the object.

I've managed to get a distance to light pole about 70m away, pointed at my neighbour's dog doing 3km/h, 50m away. Note that

those are small objects compared to a car.

These speed guns don't have a camera that takes a photo.

hence why they are called radar guns.

Edited by RB ONEVIA
Link to comment
https://www.sau.com.au/forums/topic/270475-speed-cameras/#findComment-4641777
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...