Jump to content
SAU Community

Recommended Posts

Just bought another 33, and am doing the 100K service,,

the pump I got from Bursons is the wrong type,,

The one on the car has the larger impeller, but, it also has one hole (the small 10mm bolt) at a different position,,

Which pump do I have?

Any help fromthe pro's please?

11/95 ECR33 Rb25 Turbo

Link to comment
https://www.sau.com.au/forums/topic/270541-water-pump-help/
Share on other sites

VL Commodore water pump, off the RB30, is a direct replacement for the one on the RB25DET. Cost me about AUD 80 from Repco when I had the 100k service done on my R33. The GT-R timing belt was also a direct fit...

Just bought another 33, and am doing the 100K service,,

the pump I got from Bursons is the wrong type,,

The one on the car has the larger impeller, but, it also has one hole (the small 10mm bolt) at a different position,,

Which pump do I have?

Any help fromthe pro's please?

11/95 ECR33 Rb25 Turbo

Link to comment
https://www.sau.com.au/forums/topic/270541-water-pump-help/#findComment-4601216
Share on other sites

Yer the pump they gave me is the RB30/ RB25 pump, but mine has the larger impeller and the 10mm bolt holt is 5-6mm further left than the replacement pump that they gave me,,

They tell me that this pump is not available and that I will need to get mine reconditioned,,

Has anybody else had this problem?

Does the GTR pump have this variation on the bolt holes?

Link to comment
https://www.sau.com.au/forums/topic/270541-water-pump-help/#findComment-4601463
Share on other sites

hold on.....before you come to conclusions....................................

get more opinions rather than 1 person before you make a decision

its important for you...... to read through this post....

someone has actually compared it.....

some of the bolt holes dont actually line up

but the RB26dett actually works on all RB engines.

and a person has posted trying an RB25 and 26 pump on his RB30.....and one hole did not line up.......

becareful

these OPS would be the people to PM....

http://www.skylinesaustralia.com/forums/Vl...p;hl=water+pump

Link to comment
https://www.sau.com.au/forums/topic/270541-water-pump-help/#findComment-4601586
Share on other sites

haha that was the thread i had up about a month ago - went to alot of trouble researching pumps hahah

i got 2 pumps here for sale, one of which im pretty certain will fit your car

$28 express posted

used but havent been used for very long as i too used the wrong pump, hence had to take out the one a mechanic replaced (he used a R33 one grrr) and put in a genuine r34 one

see my signature, can include the gates heavy duty timing belt too - both are only 35000ish kms old. no issues at all.

Edited by nuffsaid
Link to comment
https://www.sau.com.au/forums/topic/270541-water-pump-help/#findComment-4602307
Share on other sites

haha that was the thread i had up about a month ago - went to alot of trouble researching pumps hahah

i got 2 pumps here for sale, one of which im pretty certain will fit your car

$28 express posted

used but havent been used for very long as i too used the wrong pump, hence had to take out the one a mechanic replaced (he used a R33 one grrr) and put in a genuine r34 one

see my signature, can include the gates heavy duty timing belt too - both are only 35000ish kms old. no issues at all.

now how about that aye.................... the answer to your prayers 33GTT?

Link to comment
https://www.sau.com.au/forums/topic/270541-water-pump-help/#findComment-4602350
Share on other sites

Does the impeller fit in the housing?

Ive fitted a number burso rb30 pumps in rb25 and whatever else motors and they fit fine...except that bolt hole (i know the one). i had my doubts at first whether it would leak but no you just do em up no probs. obviously a bit or aero sealant (otherwise known as that brown sticky stuff that never solidifies ((loctite 3a)) or similar stag or indian) never goes astray but it will be fine.

Link to comment
https://www.sau.com.au/forums/topic/270541-water-pump-help/#findComment-4607919
Share on other sites

hahah.

Thanks guys,

I took the info printed out and the pics to Bursons, (They put it in their books lol), They got me in the correct pump (Japanese one too) retailed at $250.00, they gave it to me for $90.00 so cant complain,, but yer man, the info was a saviour,,

And as for the other pumps and belt,, I sold the car to my Brother and am looking for another one,, prefer a GTR this time, so I may be in touch,,,

:P

cheers

Edited by 33GTT
Link to comment
https://www.sau.com.au/forums/topic/270541-water-pump-help/#findComment-4620101
Share on other sites

hahah.

Thanks guys,

I took the info printed out and the pics to Bursons, (They put it in their books lol), They got me in the correct pump (Japanese one too) retailed at $250.00, they gave it to me for $90.00 so cant complain,, but yer man, the info was a saviour,,

And as for the other pumps and belt,, I sold the car to my Brother and am looking for another one,, prefer a GTR this time, so I may be in touch,,,

:(

cheers

yeah as i thought, the workshop/mechanic you went to had no clue....

they obviously needed the Part no# to source it/ring around.

at least you got it sorted

Link to comment
https://www.sau.com.au/forums/topic/270541-water-pump-help/#findComment-4620608
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...