Jump to content
SAU Community

Recommended Posts

Guys,

I'm being forced to buy a house so the OS Giken pistons I bought will never make into my engine. This was a special order and is the one of the only sets made. OS Giken as you all will know make some of the best pistons in Japan.

The kit comes complete with forged pistons, rings, clips, and heavy duty wrist pins and is brand new in the box.

I'm asking $old (which is less than I paid all up). The price I paid originally included the cost of a brand new stock piston from Nissan for them to reference and copy.

PM me if you need more detailed photos.

Only serious buyers please. I'll ship it anywhere in Australia.

(0419)

I've also got other parts which I will post up later. ie. Greddy plenum, Jun cams & adjustable wheels, Tomei valve springs, HKS head gasket etc...

Cheers,

Gerard

hey mate if i had the cash id take those pistons now but i spent to much on mine at the moment so gotta save some cash but i will b afta some cams, a head gasket and if u know who can get some for a good price some hks cam gears email me at [email protected] when u r gonna sell em thanks mate and good luck with the pistons wish i could get em :D

Due to the number of responses, here is a full list and revised numbers.

OS Giken Pistons Sold

Greddy inlet plenum + Greddy fuel rail (top feed) + adaptor Sold

Nissan Q45 90mm throttle body with matching short accelerator cable Sold

Jun Cams (custom 66(264) 9.0 lift, largest lift without headwork) Sold

Jun adjustable Cam wheels Sold

Tomei valve springs Sold

Jun 1.2mm Headgasket Sold

Nismo 300km/h speedo Sold (I can have it set to match the stock odo if required)

Nissan RB25DET Engine gasket repair kit Sold

Gasket kit comes with the following items:

1 x Gasket goo

1 x Drain plug washer

1 x Head gasket - stock

1 x Rear Crankshaft oil seal

2 x camshaft oil seals

24 x valve stem oil seals

1 x rocker cover exhaust gasket

2 x rocker cover intake gasket

1 x crankshaft oil seal

1 x Intake manifold collector gasket

1 x manifold gasket

1 x exhaust manifold gasket

1 x oil strainer gasket

1 x oil pump gasket

1 x throttle chamber gasket

1 x O ring seal

1 x A.A.C valve gasket

I can take hi-res shots of everything so let me know if you want photos. Everything listed is brand new with some unopened.

Cheers,

G

Originally posted by T0nyGTSt

The Jun cams are for the RB25det?

http://www.junauto.co.jp/products/cylinder...-nissan.html?en

T.

Everything is for the ECR33 RB25DET. Cam gears fit RB20, RB25 & RB26. Cams are Jun, but a special order with higher lift then their standard ones... They're the largest lift that will fit the head without having to machine the head. You must fit the stronger valve springs with these cams.

G

Originally posted by rb20-calais

are they both cam wheels? $200 each or for the pair?

Evan

Ooops, I meant for the pair. Price has been revised. Head Gasket is a Jun one, not HKS. (Most of these parts are rebadged anyway... :D)

Sorry about that.

G

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
×
×
  • Create New...