Jump to content
SAU Community

Rb25 Hiflow Made 240rwkw On My 20det

CEF11E
 Share

Recommended Posts

CEF11E Veteran

CEF11E

Posted
Posted

I have my Hiflow for sale as i am going a bugger turbo to suit my 30DET.

I bought this turbo from new from Sliding Performance and fitted it to my RB20DET. it is a cracking turbo and started a bit of a revolution on the forums. It has done around 30,000 k's and is in good condition. it is designed to fit an RB20DET or RB25DET and will produce enough flow for 240rwkw on a 20det and possibly a bit more on the 25det. it comes on like a hammer and pulls to redline. please have a look in THIS THREAD for the whole installation diary and performance figures.

it comes with an RB25 elbow and an actuator. it will bolt onto your standard manifold. no modifications needed. I will also supply the needed oil feed bolt, but you will have to have your oil line restrictor removed.

$500

I also have a stainless split front/dump for sale to suit this turbo. it is made by BOS importing BATMBL. do a search. these are the best dump front pipes you can get for a stock turbo.

$250

both located in Melb. would prefer not to freight the front pipe.

cheers!

CEF11E Veteran

CEF11E

Posted
  • Author
Posted

turbo is sold...

the stainless front/dump pipe is still for sale. these are the best dumps you can get for a skyline.

$250 :/ thats the same price as the copies you get from just jap.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      PXL_20250828_063541093.TS.mp4
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • PranK
      R35 GT-R production ends after 18 years

      By PranK · Posted

    • SteveL
      Leak from Tokico BM50 Brake Master Cylinder

      By SteveL · Posted

      I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      EMU Classic. For what I need it to do I see no reason to upgrade. Link and Haltech would both cost an extra chunk of money for a lot of unutilized features
×
×
  • Create New...