Jump to content
SAU Community

Recommended Posts

hey mate im intrested in the factory airbox and snorkel can you post them to 3150 including postage costs can you let me know asap

will find out tomorrow and notify costs

Cheers

Dave

do you have the fartory coolant lines for the turbo and banjo bolts. im from the sunny coast

Not sure Blue,

Have sold the turbo but all the rest is available. I'll attach a photo and you let me know

cheers davepost-9127-1244106808_thumb.jpg

can you tell me the diameter of the hole for the banjo bolt that goes into the turbo. sorry to trouble you. if its not right it wont work on my turbo. thanks for your time tho.

can you tell me the diameter of the hole for the banjo bolt that goes into the turbo. sorry to trouble you. if its not right it wont work on my turbo. thanks for your time tho.

sorry mate ...what is the banjo bolt

in the pic you sent the pipe with the yellow bits of plastic on it. i need to know the dimension of the end that bolts to the turbo. inside diameter if you could please. it shoud be about 18 mm.

in the pic you sent the pipe with the yellow bits of plastic on it. i need to know the dimension of the end that bolts to the turbo. inside diameter if you could please. it shoud be about 18 mm.

Hi Blue,

Just taken the hoses off and they are spot on 18mm. Attached are the photos.

Let me know how much you want to pay + postage

Cheers

Dave

post-9127-1244116579_thumb.jpg

  • 4 months later...
  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • GTSboy, thank you again. i’ve been reading all the other SAU RB25 vacuum line threads and you have the utmost patience for people asking “where do my vacuum lines go”. it’s appreciated. i did also enlist a few other RB guys local to me.  i would like to run 5 to 4. turbo pressure side to wastegate actuator. i would like to run 3 to 1. power steering air valve line to intercooler outlet. (this is how it was previously). i was told 2 is the bleed port for the boost solenoid - which i’m not running - so should be capped.   anyone see any problems with that?    
    • So yes. All of them. Something like 98% of all fuel in the USA has 10% ethanol: https://afdc.energy.gov/fuels/ethanol-fuel-basics It's labelled as like, AKI, 87, 91, 93 with an E10 or E5 or E15 label on the pump. At a certain point, it's not just "E10" instead of 91. It is 91, 95, 98, and all of them have 10% Ethanol in them. You can also get E85 and E30 which is why you do see some people rolling around with E30 tunes in them.
    • Thanks for the response. This is an 04 EP3 Type R. JDM spec. Fairly certain they're just basic BC racing coils. I do plan to keep as the ride quality on stock I've been told is pretty meh given Sydney roads. If I were to go down that avenue, does NSW require them to be a certain spec (close to original) etc?
    • Should have asked what is the car?
    • I've had two super conflicting experiences with blue slips. My 30 year old E39 waltzed through with no issues but my brother in law was knocked back on 12 y/o 3 series due to wiper blades and some cracking in a control arm bush.  What kind of coil overs? Do you want to keep them after?  If it was me I'd get some dirt cheap shocks and springs from eBay or scumtree. Not ideal but will get you over the line and might even be less than $1k.
×
×
  • Create New...