Jump to content
SAU Community

Massive Parts Sale - Brakes, Semi's, Wheels, Brace

SRS13
 Share

Recommended Posts

SRS13 Proficient

SRS13

Posted
Posted

Hi,

Have the following items for sale;

324mm Brake Upgrade Kit

S14 Calipers and rotors drilled to 4 stud

R32 GTR Front Calipers

Yokohama Advan 235/45/17 Semi's

RE 55's 235/45/17 semi's

17 x 7.5 + 35 ALT Wheels

16x7 & 16x8 Blitz Wheels

Whiteline Front Strut Brace

Info below.

All items located in Sydney.

All prices are near offer! Need these gone!

Can be contacted by PM or 0403 434 495.

BRAKES

Selling all these brake items as I am looking to upgrade to an AP Racing Kit.

1. 324mm Big Brake Upgrade Kit for S14/S15/R32/R33/Z32 300ZX

Price: $480 ono

This kit can be used with your standard calipers. You bolt this kit on to use a 324mm GTR Brembo sized rotor which not only looks better but provides better braking ability. This was only used for approximately 5000km. I have not used it I have only fitted it to make sure it all fits up which it does.

I bought the kit to use with the R32 GTR calipers but they did not fit.

Kit contains;

324mm GTR sized DBA 4000 rotors

Brackets to mount the caliper in the new position

All bolts, nuts and washers to fit

Ferodo Formula Pads (Standard sized pads can also be used and are recommended by some)

This is the same kit as this on ebay which sells for $900

http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...em=130094159891

IMG_3743.jpg

2. S14 Brake Calipers with S14 rotors that have been redrilled to 4 stud.

Price: $350 ono

S14 calipers in reasonably good condition with rotors. Can use these on S13/180SX without having to do a 5 stud conversion. These were on my car for 25000km and did quite a few track days. They stop really well and I had no problems whatsoever with them. The rotors were machined approx 3000km's ago. The rust is from water that fell on the rotor - this will come straight off after a light drive.

Will throw in Lucas TRW pads that have only done one track day ie 400km's.

Caliper pics above ^^^^

IMG_3819.jpg

3. R32 GTR Front Brake Calipers

Price: $280 ono

R32 GTR front calipers that I bought but never used. Was told they came off a 1992 R32 with 70,000km's. Bought off a respected member on here. I have painted them with the intent to put onto the car.

These do not fit with the 324mm brake upgrade kit (I was told they did ) which is why I bought them.

IMG_3801.jpg

SEMI SLICKS

1. Yokohama Advan AO48 235/45/17 Full Set of 4

Price: $300 ono

OK condition, good for a few track days. Bought these a little while ago but never got round to fitting them up. Have been stored in my garage.

IMG_3802.jpg

IMG_3804.jpg

IMG_3806.jpg

2. Bridgestone RE55's 235/45/17 Full Set of 4

Price: See below

Still have a few track days in them maybe more. I changed to 5 stud so could not use the wheels they were on. They are still on the wheels.

IMG_3809.jpg

IMG_3816.jpg

WHEELS

1. 17x7.5 + 35 all 4 ALT Wheels

Price: $600 ono with the RE55's semi's

Some gutter rash, but they made great track wheels and or drift wheels. Have the Bridgestones semi on them.

Would prefer to sell together with the RE55's but can separate at buyers expense.

IMG_3814.jpg

IMG_3812.jpg

Worst of the gutter rash

IMG_3815.jpg

2. Blitz Rims 16 x 7 and 16 x 8 I think +35 and + 38

Price: $250 for all 4

One of the 16 x 8 rims has a chunk missing on the inside of the rim (probably 5-8cm wide) that would need to be repaired. Not knowing this I drove on the rim from Wakefield Park to Sydney and it drove fine, no wobble or sign of a buckle nor leaking tyre.

No pics but they look like these; not in as good nick though!

http://www.japanautoswrec.info/DSCF0861.JPG

STRUT BRACE

1. Whiteline Adjustable Front Strut Brace

Price: $100 ono

Don't need this as I have a Cusco Brace. Bought off a NS.com member. Came off a 180SX SR20DET.

IMG_3807.jpg

IMG_3808.jpg

SRS13 Proficient

SRS13

Posted
  • Author
Posted
Interested in brake upgrade kit. Could you check the postage price to 2830?

Have posted rotors previously using Australia post.

I would say it would be absolute maximum $50 using registered post.

SRS13 Proficient

SRS13

Posted
  • Author
Posted

Thanks to all those interested.

Semi Slicks and ALT Wheels are Sold.

Strut Brace is Sold.

324mm Brake Upgrade Kit - Offer made awaiting deposit to be paid.

All other items still available.

Thanks.

SRS13 Proficient

SRS13

Posted
  • Author
Posted

324mm Brake Upgrade Kit Sold.

Items remaining are;

S14 calipers with rotors (4 and 5 stud)

R32 GTR calipers

Blitz 16 inch wheels with Kuhmo Semi Slicks (pretty worn) Will post pics tonight or tomorrow

Thanks.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      How do you propose I cable tie this: To something securely? Is it really just a case of finding a couple of holes and ziptying it there so it never goes flying or starts dangling around, more or less? Then run a 1/8 BSP Female to [hose adapter of choice?/AN?] and then the opposing fitting at the bush-into-oil-block end? being the hose-into-realistically likely a 1/8 BSPT male) Is this going to provide any real benefit over using a stainless/steel 1/4 to 1/8 BSPT reducing bush? I am making the assumption the OEM sender is BSPT not BSPP/BSP
    • funkymonkey
      Jacks that fit under GTR lips that can reach the subframe?

      By funkymonkey · Posted

      I fashioned a ramp out of a couple of pieces of 140x35 lumber, to get the bumper up slightly, and then one of these is what I use
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      You are all good then, I didn't realise the port was in a part you can (have!) remove. Just pull the broken part out, clean it and the threads should be fine. Yes, the whole point about remote mounting is it takes almost all of the vibration out via the flexible hose. You just need a convenient chassis point and a cable tie or 3.
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      ..this is the current state of that port. I appreciate the info help (and the link to the Earls thing @Duncan). Though going by that it seems like 1/4 then BSP'ing it and using a bush may work. I don't know where I'd be remote mounting the pressure sender... to... exactly. I assume the idea here is that any vibration is taken up by the semiflexible/flexible hose itself instead of it leveraging against the block directly. I want to believe a stronger, steel bush/adapter would work, but I don't know if that is engineeringly sound or just wishful thinking given the stupendous implications of a leak/failure in this spot. What are the real world risks of dissimilar metals here? It's a 6061 Aluminum block, and I'm talking brass or steel or SS adapters/things.
×
×
  • Create New...