Jump to content
SAU Community

Recommended Posts

hey guys,

recently got my alarm installed from doug @ eastside installs but if i unlock the car, and i dont start the car within 30secs the engine re-immobolises but the doors dont auto re-lock! why? Doug said it was to do with the interior light coming on or somcrap and R33's didnt auto re-lock, sounded like bs - did he install it properly?

also the range is pretty short, about 5meters... he said this was the normal range for this type of alarm? anyone confirm

Link to comment
https://www.sau.com.au/forums/topic/271696-mongoose-m80g/
Share on other sites

Exact same problem with mine. However mine doesnt have central locking to begin with so that might the reason (installed the central locking kit). But yea the range is shit. and sometimes you will have to keep pressing the button before you get any response (like you lock it straight after you unlock it).

Link to comment
https://www.sau.com.au/forums/topic/271696-mongoose-m80g/#findComment-4616789
Share on other sites

It should be an option (configurable). I have an M80 on my R34 so might be slightly different but for me it works as follows:

Unlock via remote: Don't open any door, the car will re-lock itself.

Unlock via remote: Open a door but don't start ignition, the car will re-arm the immobiliser but NOT re-lock the doors.

Link to comment
https://www.sau.com.au/forums/topic/271696-mongoose-m80g/#findComment-4616853
Share on other sites

It should be an option (configurable). I have an M80 on my R34 so might be slightly different but for me it works as follows:

Unlock via remote: Don't open any door, the car will re-lock itself.

Unlock via remote: Open a door but don't start ignition, the car will re-arm the immobiliser but NOT re-lock the doors.

as above

Link to comment
https://www.sau.com.au/forums/topic/271696-mongoose-m80g/#findComment-4617154
Share on other sites

this is what happens with mine:

If i unlock the car and dont open the doors: the doors dont re-lock

the guy that installed it said it was because my cabin light comes ON when i unlock the car so the alarm thinks the door is open and thats why the alarm wont relock the doors, he wants some more $$ to come out and fix the range and autorelock :dry:

Link to comment
https://www.sau.com.au/forums/topic/271696-mongoose-m80g/#findComment-4617869
Share on other sites

It should be an option (configurable). I have an M80 on my R34 so might be slightly different but for me it works as follows:

Unlock via remote: Don't open any door, the car will re-lock itself.

Unlock via remote: Open a door but don't start ignition, the car will re-arm the immobiliser but NOT re-lock the doors.

+1.

Link to comment
https://www.sau.com.au/forums/topic/271696-mongoose-m80g/#findComment-4618005
Share on other sites

Would it work better if you just turned the center light off permanently?

You can always turn it on when you hop in the car or need to find something in the car..

I had a black-wire Cyclops alarm in 1 of my other cars and that did well.. was $250 from Ministry of Bass.. but it doesn't have as many options as viper or m80 obviously.. Its just an alarm and immobilizer really (connects to central locking if factory fitted) range on that remote is heaps far like 30-40 meters or through walls it has no problem..

Link to comment
https://www.sau.com.au/forums/topic/271696-mongoose-m80g/#findComment-4628405
Share on other sites

it really depends on the car. if its a later car then the BCM controls the light. meaning that when you unlock the car it turns the light on. if they pick the wire up for the doors on that side (light) then the alarm sees the door open and doesn't do as its supposed to.

Link to comment
https://www.sau.com.au/forums/topic/271696-mongoose-m80g/#findComment-4628624
Share on other sites

  • 3 months later...

Hey guys,

I'm not sure what immobilizer I have, but I can see a mongoose battery pack I think it's there to keep the siren going when the battery is dead *shrugs*.

The car also has that 30 second immobilizer function not certain if it auto locks itself I haven't check (at the moment I have it hidden in my fiance's garage until I get used to driving manual).

How do I check what immobilizer I have? Can someone post a pic of their remote?

I have a pair of greyish-black remotes with buttons "I" - to activate/deactivate and "II" to silence on it.

Cheers guys,

fibbo.

Link to comment
https://www.sau.com.au/forums/topic/271696-mongoose-m80g/#findComment-4854155
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So for the wide band is a Bosch 4.9 correct for the Link G4+ along with a Can bus? Just get the Link gear or is generic ok too? Eg here: LINK LINK DIGITAL WIDEBAND CAN MODULE WITH BOSCH 4.9 SENSOR : KYP Performance House  
    • Bit difficult to follow. Have a look below and see what the standard R32 layout was like. Note there was a restrictor in place immediately before "turbocharged pressure control solenoid" that, if removed, magically got you 1 bar boost.
    • I might be way off the mark here.. there must be a T junction under the manifold. That takes manifold pressure through a check valve prior to the T, one side splits out to this bleed off orifice, the other straight to the wastegate actuators. 
    • Carrying out some engine due diligence before my first drive in a 260RS that has been in storage for 10+ years, and found two lines that are susposed to be plumbed into the boost control solenoid. One of the lines (the wastegate boost supply line) to actuate the gates, had a bolt in one end blocking it. The other line (main boost signal line) from the very rear of the intake manifold (RB26DETT) and runs up to the boost controller had this pill in the end of it as seen in photos. Other than the obvious (T28 Ceramic turbos might well be cooked)  Can anyone shed any light on if there is any validity at all with this mod, bleeding a constant fixed rate of manifold boost pressure off through this 3mm hole?  Is it deliberate?  Was this a 90s Jap mod done to RB26's? Or has someone just fitted this without any idea of what happens to ceramic T28s if they are not gate controlled?    
×
×
  • Create New...